Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Hydride transfer aldehydes

FIGURE 18.20 NAD and NADP participate exclusively iii two-electroii transfer reactions. For example, alcohols can be oxidized to ketones or aldehydes via hydride transfer to NAD(P). ... [Pg.589]

The NAD- and NADP-dependent dehydrogenases catalyze at least six different types of reactions simple hydride transfer, deamination of an amino acid to form an a-keto acid, oxidation of /3-hydroxy acids followed by decarboxylation of the /3-keto acid intermediate, oxidation of aldehydes, reduction of isolated double bonds, and the oxidation of carbon-nitrogen bonds (as with dihydrofolate reductase). [Pg.590]

Aldehydes can react through a hydride transfer as in the Cannizzaro reaction. [Pg.9]

The key step of the Cannizzaro reaction is a hydride transfer. The reaction is initiated by the nucleophilic addition of a hydroxide anion to the carbonyl group of an aldehyde molecule 1 to give the anion 4. In a strongly basic medium, the anion 4 can be deprotonated to give the dianionic species 5 ... [Pg.50]

The aldehyde or ketone, when treated with aluminum triisopropoxide in isopropanol as solvent, reacts via a six-membered cyclic transition state 4. The aluminum center of the Lewis-acidic reagent coordinates to the carbonyl oxygen, enhancing the polar character of the carbonyl group, and thus facilitating the hydride transfer from the isopropyl group to the carbonyl carbon center. The intermediate mixed aluminum alkoxide 5 presumably reacts with the solvent isopropanol to yield the product alcohol 3 and regenerated aluminum triisopropoxide 2 the latter thus acts as a catalyst in the overall process ... [Pg.199]

Several factors affect the reactivity of the boron and aluminum hydrides, including the metal cation present and the ligands, in addition to hydride, in the complex hydride. Some of these effects can be illustrated by considering the reactivity of ketones and aldehydes toward various hydride transfer reagents. Comparison of LiAlH4 and NaAlH4 has shown the former to be more reactive,63 which is attributed to the greater... [Pg.398]

This involves hydride transfer from an aldehyde molecule lacking an a-H atom, e.g. HCHO, R3CCHO, ArCHO, to a second molecule of either the same aldehyde (disproportionation) or sometimes to a molecule of a different aldehyde ( crossed Cannizzaro). The reaction requires the presence of strong bases, and with, for example, PhCHO the rate law is found to be,... [Pg.216]

This reaction of aromatic aldehydes, ArCHO, resembles the Cannizzaro reaction in that the initial attack [rapid and reversible—step (1)] is by an anion—this time eCN—on the carbonyl carbon atom of one molecule, the donor (125) but instead of hydride transfer (cf. Cannizzaro, p. 216) it is now carbanion addition by (127) to the carbonyl carbon atom of the second molecule of ArCHO, the acceptor (128), that occurs. This, in common with cyanohydrin formation (p. 212) was one of the earliest reactions to have its pathway established— correctly —in 1903. The rate law commonly observed is, as might be expected,... [Pg.231]

On the basis of these experimental results, a possible mechanism has been proposed for the reaction of 1-215 with Sml2 (Scheme 1.52). After formation of the syn-complex A, a rearrangement occurs to give the aldehyde B, which coordinates to the added aldehyde RCHO to afford complex C. Subsequent samarium-catalyzed nucleophilic attack of the secondary alcohol to the carbonyl of RCHO generates a hemiacetal, D. There follows an irreversible intramolecular 1,5-hydride transfer via... [Pg.42]

The regiochemical control of Pd-catalyzed hydride transfer reaction is much more effective than that of the radical denitration, as shown in Eq. 7.98. The base-catalyzed reaction of nitroolefins with aldehydes followed by denitration provides a new synthetic method of homoallyl alcohols (Eq. 7.99).140 Exomethylene compounds are obtained by denitration of cyclic allylic nitro compounds with Pd(0), HC02H and Et3N (Eq. 7.100).140b... [Pg.213]

It is well known that strong electrophiles such as carbocations are reduced by organosilicon hydrides (Eq. 1).3,70,71 On the other hand, simple mixtures of organosilicon hydrides and compounds with weakly electrophilic carbon centers such as ketones and aldehydes are normally unreactive unless the electrophilicity of the carbon center is enhanced by complexation of the carbonyl oxygen with Brpnsted acids3,70 73 or certain Lewis acids (Eq. 2).1,70,71,74,75 Using these acids, hydride transfer from the silicon center to carbon may then occur to give either alcohol-related or hydrocarbon products. [Pg.9]

The kinetics of the ionic hydrogenation of isobutyraldehyde were studied using [CpMo(CO)3H] as the hydride and CF3C02H as the acid [41]. The apparent rate decreases as the reaction proceeds, since the acid is consumed. However, when the acidity is held constant by a buffered solution in the presence of excess metal hydride, the reaction is first-order in acid. The reaction is also first-order in metal hydride concentration. A mechanism consistent with these kinetics results is shown in Scheme 7.8. Pre-equilibrium protonation of the aldehyde is followed by rate-determining hydride transfer. [Pg.171]

A competition between stoichiometric hydrogenation of acetone and acetophenone resulted in hydrogenation of the acetone [42]. Competitions of this type could be influenced by both the basicity of the ketone, as well as by the kinetics of hydride transfer to the protonated ketone. An intramolecular competition between an aliphatic and aromatic ketone resulted in preferential hydrogenation of the aliphatic ketone, with the product shown in Eq. (24) being isolated and fully characterized by spectroscopy and crystallography. Selective ionic hydrogenation of an aldehyde over a ketone was also found with HOTf and [Cp(CO)3WH],... [Pg.172]

Molybdenum and tungsten carbonyl hydride complexes were shown (Eqs. (16), (17), (22), (23), (24) see Schemes 7.5 and 7.7) to function as hydride donors in the presence of acids. Tungsten dihydrides are capable of carrying out stoichiometric ionic hydrogenation of aldehydes and ketones (Eq. (28)). These stoichiometric reactions provided evidence that the proton and hydride transfer steps necessary for a catalytic cycle were viable, but closing of the cycle requires that the metal hydride bonds be regenerated from reaction with H2. [Pg.179]

A case of the addition of an allylstannane to aldehydes has been reported by Tagliavini to proceed with appreciable enantioselectivity (Scheme 6.15) [40]. A notable feature of the Zr-catalyzed transformations is that they proceed more rapidly than the corresponding Ti-catalyzed processes reported by the same research team (see Scheme 6.16). Furthermore, C—C bond formation is significantly more efficient when the reactions are carried out in the presence of 4 A molecular sieves the mechanistic rationale for this effect is not known. It should be noted that alkylations involving aliphatic aldehydes are relatively low-yielding, presumably as the result of competitive hydride transfer and formation of the reduced primary alcohol. [Pg.197]

Reduction of carbonyl compoundsThe reagent reduces aldehydes or ketones to alcohols in refluxing cyclohexane in 2-5 hours yields are 60-80%. The reduction probably involves hydride transfer from the carbon beta to the magnesium center. [Pg.197]

The essential features of the catalytic cycle are summarized in Figure 12.6. After binding of NAD+ the water molecule is displaced from the zinc atom by the incoming alcohol substrate. Deprotonation of the coordinated alcohol yields a zinc alkoxide intermediate, which then undergoes hydride transfer to NAD+ to give the zinc-bound aldehyde and NADH. A water molecule then displaces the aldehyde to regenerate the original catalytic zinc centre, and finally NADH is released to complete the catalytic cycle. [Pg.202]

A viable iron carbonyl-mediated reduction process converts acid chlorides and bromoalkanes into aldehydes [3, 6]. Yields are high, with the exception of nitro-benzoyl chloride, and the procedure is generally applicable for the synthesis of alkyl, aryl and a,(i-unsaturated aldehydes from the acid chlorides. The reduction proceeds via the initial formation of the acyl iron complex, followed by hydride transfer and extrusion of the aldehyde (cf. Chapter 8). [Pg.501]

Probably the most extensively studied enzymes are those from alcohol dehydrogenase family. One enzyme from this series which has been thoroughly examined both experimentally and theoretically is liver alcohol dehydrogenase (LADH). It catalyzes the reversible conversion of an alcohol to an aldehyde by transferring hydride from substrate to the cofactor (NAD+) ... [Pg.376]

In the aldol-Tishchenko reaction, a lithium enolate reacts with 2 mol of aldehyde, ultimately giving, via an intramolecular hydride transfer, a hydroxy ester (51) with up to three chiral centres (R, derived from rYhIO). The kinetics of the reaction of the lithium enolate of p-(phenylsulfonyl)isobutyrophenone with benzaldehyde have been measured in THF. ° A kinetic isotope effect of fee/ o = 2.0 was found, using benzaldehyde-fil. The results and proposed mechanism, with hydride transfer rate limiting, are supported by ab initio MO calculations. [Pg.13]

The reactions of the species H3O+, NO+, and O2+ with a range of aldehydes and ketones have been studied by the selected ion flow tube (SIFT) method. H3O+ protonates ketones and aldehydes, with the latter eliminating water under the conditions of measurement. Similarly, NO+ associates with ketones, but this is followed by hydride transfer for the aldehydes. O2+ reactions typically produce several ionic products. [Pg.29]

Mechanisms involving glycol bond fission have been proposed for the oxidation of vicinal diols, and hydride transfer for other diols in the oxidation of diols by bromine in acid solution.The kinetics of oxidation of some five-ring heterocyclic aldehydes by acidic bromate have been studied. The reaction of phenothiazin-5-ium 3-amino-7-dimethylamino-2-methyl chloride (toluidine blue) with acidic bromate has been studied. Kinetic studies revealed an initial induction period before the rapid consumption of substrate and this is accounted for by a mechanism in which bromide ion is converted into the active bromate and hyperbromous acid during induction and the substrate is converted into the demethylated sulfoxide. [Pg.231]

The mechanism of the aldol-Tishchenko reaction has been probed by determination of kinetics and isotope effects for formation of diol-monoester on reaction between the lithium enolate of p-(phenylsulfonyl)isobutyrophenone (LiSIBP) and two molecules of benzaldehyde. ". The results are consistent with the formation of an initial lithium aldolate (25) followed by reaction with a second aldehyde to form an acetal (26), and finally a rate-limiting intramolecular hydride transfer (Tishchenko... [Pg.355]

The functionalization of H—Si(l 11) surfaces has been extended to the reaction with aldehydes. Indeed, H—Si(lll) reacts thermally (16 h at 85 °C) with decanal to form the corresponding Si—OCH2R monolayer that has been characterized by ATR-FTIR, XPS and atomic force microscopy (AFM) [63]. The reaction is thought to proceed either by a radical chain mechanism via adventitious radical initiation or by nucleophilic addition/hydride transfer. On the other hand, the reaction of H—Si(lll) with octadecanal activated by irradiation with a 150W mercury vapour lamp (21 h at 20-50 °C) afforded a R... [Pg.210]

The reaction of complex hydrides with carbonyl compounds can be exemplified by the reduction of an aldehyde with lithium aluminum hydride. The reduction is assumed to involve a hydride transfer from a nucleophile -tetrahydroaluminate ion onto the carbonyl carbon as a place of the lowest electron density. The alkoxide ion thus generated complexes the remaining aluminum hydride and forms an alkoxytrihydroaluminate ion. This intermediate reacts with a second molecule of the aldehyde and forms a dialkoxy-dihydroaluminate ion which reacts with the third molecule of the aldehyde and forms a trialkoxyhydroaluminate ion. Finally the fourth molecule of the aldehyde converts the aluminate to the ultimate stage of tetraalkoxyaluminate ion that on contact with water liberates four molecules of an alcohol, aluminum hydroxide and lithium hydroxide. Four molecules of water are needed to hydrolyze the tetraalkoxyaluminate. The individual intermediates really exist and can also be prepared by a reaction of lithium aluminum hydride... [Pg.17]


See other pages where Hydride transfer aldehydes is mentioned: [Pg.28]    [Pg.1074]    [Pg.1566]    [Pg.23]    [Pg.385]    [Pg.390]    [Pg.1335]    [Pg.18]    [Pg.464]    [Pg.93]    [Pg.74]    [Pg.422]    [Pg.168]    [Pg.169]    [Pg.172]    [Pg.173]    [Pg.192]    [Pg.282]    [Pg.377]    [Pg.333]    [Pg.47]   
See also in sourсe #XX -- [ Pg.86 ]




SEARCH



Aldehydes using hydride transfer reagents

Hydride transfer

© 2024 chempedia.info