Aldehydes Baylis-Hillman reaction

The coupling reaction between an electron-deficient alkene and an aldehyde (Baylis-Hillman reaction) usually requires a cata-lyst/catalytic system (typically, a tertiary amine and a Lewis acid) to be successful. The base catalyst is not necessary when pyridine-2-carboxaldehyde is employed as electrophile it is enough with the activation effected by stoichiometric amounts of TMSOTf for the reaction to proceed to give indolizidine derivatives (eq 71). ... 

The coupling reaction between acryUc derivatives and aldehydes (Baylis-Hillman reaction) is catalysed by tertiary amines (e.g. reaction of Table 7.3). The addition of a zwitterionic form, derived from the coupling of acrylate with amine, to the aldehyde is a key step of the reaction and is a formal Knoevenagel-type addition. 

Apart from the thoroughly studied aqueous Diels-Alder reaction, a limited number of other transformations have been reported to benefit considerably from the use of water. These include the aldol condensation , the benzoin condensation , the Baylis-Hillman reaction (tertiary-amine catalysed coupling of aldehydes with acrylic acid derivatives) and pericyclic reactions like the 1,3-dipolar cycloaddition and the Qaisen rearrangement (see below). These reactions have one thing in common a negative volume of activation. This observation has tempted many authors to propose hydrophobic effects as primary cause of ftie observed rate enhancements. 

An alkene activated by an electron-withdrawing group—often an acrylic ester 2 is used—can react with an aldehyde or ketone 1 in the presence of catalytic amounts of a tertiary amine, to yield an a-hydroxyalkylated product. This reaction, known as the Baylis-Hillman reaction, leads to the formation of useful multifunctional products, e.g. o -methylene-/3-hydroxy carbonyl compounds 3 with a chiral carbon center and various options for consecutive reactions. 

Apart from tertiary amines, the reaction may be catalyzed by phosphines, e.g. tri- -butylphosphine or by diethylaluminium iodide." When a chiral catalyst, such as quinuclidin-3-ol 8 is used in enantiomerically enriched form, an asymmetric Baylis-Hillman reaction is possible. In the reaction of ethyl vinyl ketone with an aromatic aldehyde in the presence of one enantiomer of a chiral 3-(hydroxybenzyl)-pyrrolizidine as base, the coupling product has been obtained in enantiomeric excess of up to 70%, e.g. 11 from 9 - -10 ... 

The Baylis-Hillman reaction is usually carried out under mild conditions (0°C or room temperature). The reaction time varies from a few minutes to even days. With the proper catalyst, good yields are possible. In the absence of an aldehyde or ketone as the electrophilic component, a dimerization of the activated alkene can take place under the influence of the catalyst, as also observed as a side reaction under the usual reaction conditions ... 

In the presence of a base such as l,4-diazabicyclo[2.2.2]octane (DABCO) or tri-alkylphosphines, conjugated carbonyl compounds such as esters and amides add to aldehydes via the a-carbon to give a-alkenyl-P-hydroxy esters or amides. This sequence is called the Baylis-Hillman reaction and a simple example is... 

Addition of conjugated alkenes to aldehydes (the Baylis-Hillman reaction)... 

The aziridine aldehyde 56 undergoes a facile Baylis-Hillman reaction with methyl or ethyl acrylate, acrylonitrile, methyl vinyl ketone, and vinyl sulfone [60]. The adducts 57 were obtained as mixtures of syn- and anfz-diastereomers. The synthetic utility of the Baylis-Hillman adducts was also investigated. With acetic anhydride in pyridine an SN2 -type substitution of the initially formed allylic acetate by an acetoxy group takes place to give product 58. Nucleophilic reactions of this product with, e. g., morpholine, thiol/Et3N, or sodium azide in DMSO resulted in an apparent displacement of the acetoxy group. Tentatively, this result may be explained by invoking the initial formation of an ionic intermediate 59, which is then followed by the reaction with the nucleophile as shown in Scheme 43. 

It should be noted that Baylis-Hillman reaction of Garner s aldehyde with methyl acrylate and DABCO results in racemization of the stereocenter of the amino aldehyde [61]. In the case of substrate 56 such racemization is seriously hampered due to the large inversion barrier in three-membered ring compounds [62]. 

The asymmetric Baylis-Hillman reaction of sugar-derived aldehydes as chiral electrophiles with an activated olefin in dioxane water (1 1) proceeded with 36-86% de and in good yields of the corresponding glycosides (Eq. 10.47).104 The use of chiral /V-mcthylprolinol as a chiral base catalyst for the Baylis-Hillman reaction of aromatic aldehydes with ethyl acrylate or methyl vinyl ketone gave the adducts in good yields with moderate-to-good enantioselectivities in l,4-dioxane water (1 1, vol/vol) under ambient conditions.105... 

It should be noted that catalytic amounts of feA-arylureas and bis-arylthioureas greatly accelerated the DABCO-promoted Baylis-Hillman reaction of aromatic aldehydes with methyl acrylate in the absence of solvent. These robust organocatalysts were better mole-per-mole promoters of the reaction than either methanol or water and they were recovered in higher yields.106... 

PDMS thimble contained in glass vial. The substrate, an acetal, is within the PD MS thimble and undergoes an acid-catalyzed transformation into an aldehyde. The aldehyde then diffuses to the exterior and undergoes the Baylis—Hillman reaction catalyzed by DMAP to give the product, (b) Various acid and base... 

The 1,2-benzothiazepine 1,1-dioxides 126 were prepared in fair yields (e.g. 126, R = H, Ar = p-ClC6H4, 52%) by a Heck coupling on the precursors 125, which were obtained in turn from an aza Baylis-Hillman reaction involving the appropriate sulfonamide, aldehyde, and methyl acrylate reactants <06TL8591>. 

Chiral fe-thiourea-type catalysts effectively provide the Baylis Hillman reaction with cyclohexenone and aldehydes.181 In several reactions, thiourea derivatives have been used as significant and specific catalyst because of their intermolecular hydrogen bonding ability (Scheme 74).182 186... 

Racker et al. have developed an interesting new combinatorial method for the synthesis of [l,4]oxazepin-7-ones (eg 139, R = Ph) from aldehydes and a-amino alcohols with the Baylis-Hillman reaction being a key step . 

It is also possible to carry out a substrate-controlled reaction with aldehydes in an asymmetric way by starting with an acetylene bearing an optically active ester group, as shown in Eq. 9.8 [22]. The titanium—acetylene complexes derived from silyl propiolates having a camphor-derived auxiliary react with aldehydes with excellent diastereoselectivity. The reaction thus offers a convenient entry to optically active Baylis—Hillman-type allyl alcohols bearing a substituent (3 to the acrylate group, which have hitherto proved difficult to prepare by the Baylis—Hillman reaction itself. 

The synthesis shown in Fig. 40 provided access to heptoses,55 but according to our definition, this is not a higher sugar synthesis. However, the approach to such derivative was based on the Baylis-Hillman reaction of acyclic sugar-derived aldehydes, a reaction not commonly applied in sugar chemistry and worth to mention in this review. 

When methylene bisphosphonate (169) is reacted in a Horner reaction with an aromatic aldehyde, the alkenyl phosphonate 170 is produced (Scheme 5.25). By metalation with LDA in THF, this is converted to the vinyllithium intermediate 171 that, with the ketone 172, affords a Baylis-Hillman reaction-type product, 173 on base treatment, this is converted to the arylallene 174 [67]. 

The Baylis-Hillman reaction (Scheme 3) of ethyl vinyl ketone with electron-deficient aromatic aldehydes (e.g. where R = 0-NO2C6H4), in MeCN or EtCN solution, has been found to proceed enantioselectively in presence of catalytic base (32) derived from proline. The Michael adduct formed between the catalyst and the vinyl... 

Also known as Morita-Baylis-Hillman reaction, and occasionally known as Rauhut-Currier reaction. It is a carbon—carbon bond-forming transformation of an electron-poor alkene with a carbon electrophile. Electron-poor alkenes include acrylic esters, acrylonitriles, vinyl ketones, vinyl sulfones, and acroleins. On the other hand, carbon electrophiles may be aldehydes, a-alkoxycarbonyl ketones, aldimines, and Michael acceptors. 

The highly enantioselective Morita-Baylis-Hillman reaction of cyclohexenone with aldehydes is catalyzed by a chiral BlNOL-derived Brpnsted acid 8 in the presence of triethylphosphine as the nucleophilic promoter (Scheme 12.6). ... 

The most efficient catalyst system for the Morita-Baylis-Hillman reaction of methyl vinyl ketone has been reported by Miller [183, 184], Use of L-proline (58) (10 mol%) in conjunction with the A-methyl imidazole containing hexapeptide 131 (10 mol%) provided an efficient platform for the reaction of 125 with a series of aromatic aldehydes 127 (52-95% yield 45-81% ee) (Scheme 52). Importantly, it was shown that the absolute configuration of the proline catalyst was the major factor in directing the stereochemical outcome of the reaction and not the complex peptide backbone. 

An interesting alternative intramolecular cyclisation was discovered by Jprgensen and co-workers [187]. Although not strictly exploiting an enamine intermediate, the transformation represents a secondary amine catalysed Morita-Baylis-Hillman reaction leading to a series of highly functionalised cyclohexene products. Reaction of the Nazarov reagent 137 with a,P-unsaturated aldehydes in the presence of the diarylprolinol ether 30 led to the cyclohexene products 138 (49-68% yield 86-96% ee) via a tandem Michael/Morita-Baylis-Hillman reaction (Scheme 54). 

The aldehyde can be replaced by an imine and the reaction is then called the aza-Baylis-Hillman reaction [87, 88]. (3-Amino-a-methylene structures obtained in this way could further be converted to a range of biologically important molecules, such as p-amino acids [89]. First reaction of this kind was published in 1984 [90]. Tosylimines and ethylacrylate reacted in the presence of DABCO as catalyst to give p-aminoesters. First three-component aza-Baylis-Hillman reaction was published in 1989 by Bertenshaw and Kahn [91], with imine formation in situ from an aldehyde and an amine. In the presence of triphenylphosphine as catalyst, the reaction with methylacrylate led to the formation of the p-amino-ot-methylene esters and ketones in good yields (Scheme 38). 

In the proposed mechanism (Scheme 9), the rate-determining step is the reaction between aldehyde and enolate. In the absence of a solvent, a major issue with this reaction is the typical low rate and the need for a high concentration of catalyst (usually DABCO). It was reported recently that, under basic conditions, the ionic liquid [BDMIM][PF6] is inert and that the Baylis Hillman reaction in [BDMIMjPFg proceeds smoothly with better yields than in [BMIMjPFg (163). 

Substituted allyl alcohols can be prepared on insoluble supports under mild conditions using the Baylis-Hillman reaction (Figure 7.2). In this reaction, an acrylate is treated with a nucleophilic tertiary amine (typically DABCO) or a phosphine in the presence of an aldehyde. Reversible Michael addition of the amine to the acrylate leads to an ester enolate, which then reacts with the aldehyde. The resulting allyl alcohols are valuable intermediates for the preparation of substituted carboxylic acids [43,44],... 

Sulfonamides can also be alkylated by support-bound electrophiles (Table 8.10). Polystyrene-bound allylic alcohols have been used to N-alkylate sulfonamides under the conditions of the Mitsunobu reaction. Oxidative iodosulfonylamidation of support-bound enol ethers (e.g. glycals Entry 3, Table 8.10) has been used to prepare /V-sulfonyl aminals. Jung and co-workers have reported an interesting variant of the Baylis-Hillman reaction, in which tosylamide and an aromatic aldehyde were condensed with polystyrene-bound acrylic acid to yield 2-(sulfonamidomethyl)acrylates (Entry 4, Table 8.10). 

---