Adsorbents porous polymeric

Gaseous and particulate pollutants are withdrawn isoldnetically from an emission source and collected in a multicomponent sampling train. Principal components of the train include a high-efficiency glass- or quartz-fiber filter and a packed bed of porous polymeric adsorbent resin (typically XAD-2 or polyurethane foam for PCBs). The filter is used to collect organic-laden particulate materials and the porous polymeric resin to adsorb semivolatile organic species (com-... 

Some bead materials possess porous structure and, therefore, have very high surface to volume ratio. The examples include silica-gel, controlled pore glass, and zeolite beads. These inorganic materials are made use of to design gas sensors. Indicators are usually adsorbed on the surface and the beads are then dispersed in a permeation-selective membrane (usually silicone rubbers). Such sensors possess high sensitivity to oxygen and a fast response in the gas phase but can be rather slow in the aqueous phase since the gas contained in the pores needs to be exchanged. Porous polymeric materials are rarer and have not been used so far in optical nanosensors. 

Tenax TA and Tenax GC are a recently introduced porous polymeric material originally developed as a GCS column packing. It is hydrophobic and is excellent for adsorbing volatiles from the atmosphere at room... 

The breakthrough volxame trends for many sorbate types on the porous polymeric sorbents indicate a limited trapping capacity in the supercritical fluid CO2 above 200 atmospheres. Fractionation and selective retention on these sorbents seems only possible below this specified pressure limit for the odoriferous solutes examined in this study. Adsorbent surface area appears to be the most significant factor contributing to the retention of sorbates on these sorbents as well as activated carbon. For certain synthetic adsorbents (Tenax, XAD-2) employed in this study, pressure-induced morphological changes in the polymer matrix lead to an increase in the sorption capacity, and hence to an increase in breakthrough volumes at intermediate pressures. 

Porous polymeric adsorbing resins, particularly styrene—DVB copolymers, have a complex texture which is well known to result from the microphase separation of an inert diluent from the polymer phase during the polymerization of the initially homogeneous solution composed of the comonomers and the diluent. Two types of diluents and, correspondingly, two reasons have been recognized for the phase separation. 

Disadvantages of the known porous polymeric membrane preparation processes are that they involve additional process steps after the formation of the fiber to come to a final product. It is therefore desirable to have a more efficient preparation process. A new method to prepare structures of any geometry (Figure 6.13c through f) and large variety of functionality was recently proposed [61]. The authors proposed to incorporate the functionality by dispersion of particles in a polymeric porous structure formed by phase inversion. A slurry of dissolved polymer and particulate material can be cast as a flat film or spun into a fiber and then solidified by a phase inversion process. This concept is nowadays commercialized by Mosaic Systems. The adsorber membranes prepared via this route contain particles tightly held together within a polymeric matrix of different shapes, which can be operated either in stack of microporous flat membranes or as a bundle of solid or hollow-fiber membranes. 

In the opinion of Sandra and de Zeeuw [20], one of the further developments will concern new porous-layer open-tubular columns with various adsorbents and porous polymeric phases and their wide practical application. 

Grzegorczyk, D.S., and Carta, G., Adsorption of amino acids on porous polymeric adsorbents Intraparticle mass transfer (corrigendum), Chem. Eng. Sci., 52(4), 655 (1997). 

TABLE 2.7 Porous Polymeric Adsorbents for Gas-Solid Chromatography... 

Porous polymeric adsorbents for liquid chromatography can be categorised as being either microporous of macroporous depending upon the morphology of the individual particle. The type of pore structure is dependent upon the degree of cross-linking of the polymer chains within each particle. 

In Sec. 3 our presentation is focused on the most important results obtained by different authors in the framework of the rephca Ornstein-Zernike (ROZ) integral equations and by simulations of simple fluids in microporous matrices. For illustrative purposes, we discuss some original results obtained recently in our laboratory. Those allow us to show the application of the ROZ equations to the structure and thermodynamics of fluids adsorbed in disordered porous media. In particular, we present a solution of the ROZ equations for a hard sphere mixture that is highly asymmetric by size, adsorbed in a matrix of hard spheres. This example is relevant in describing the structure of colloidal dispersions in a disordered microporous medium. On the other hand, we present some of the results for the adsorption of a hard sphere fluid in a disordered medium of spherical permeable membranes. The theory developed for the description of this model agrees well with computer simulation data. Finally, in this section we demonstrate the applications of the ROZ theory and present simulation data for adsorption of a hard sphere fluid in a matrix of short chain molecules. This example serves to show the relevance of the theory of Wertheim to chemical association for a set of problems focused on adsorption of fluids and mixtures in disordered microporous matrices prepared by polymerization of species. 

Cross-reactive sensing arrays were developed to detect odors and vapors in an artificial nose manner. Solvatochromic dyes such as Nile Red are adsorbed on the surface or embedded into various polymeric or porous silica beads. The beads respond to analyte vapor by a change in fluorescence maxima or/and intensity due to changes of polarity inside the bead. A portable instrument and preliminary field test for the detection of petroleum products was recently described [106]. 

These schemes expressly induded the idea that clays and porous minerals adsorbed, absorbed, and ultimately concentrated any extant organics from a dilute oceanic broth on the early Earth. This idea is critical because it is difficult to imagine that the kind of polymerization and chiral amplification processes discussed above could or would have occurred in a water solution not much more than millimolar in organics. [131]... 

---