Additives and composites

Additives are used for a wide variety of purposes, and may be classified as fillers, anti-oxidants, stabilisers, plasticisers, fire retardants, pigments and lubricants. Anti-oxidants and stabilisers are usually used in rather small quantities in order to prevent degradation of the polymer when it is exposed to air, light and heat the intention here is to maintain the properties of the polymer rather than to modify them. Fillers may be used either simply to produce a cheaper product or to improve the properties, in particular the mechanical properties. Lubricants may be used externally, to prevent adhesion of the polymer to the processing equipment, or internally, either to aid flow during processing or to reduce friction between the product and other materials. 

Although composites are a very important class of polymeric materials they form a separate subject in their own right, in which it is necessary to assume an understanding of the properties both of the polymer matrix and of the reinforcing material. They are not discussed further in this book, but it is interesting to note that in some ways semi-crystalline polymers can be considered as self-reinforcing polymers, because the mechanical properties of the crystalline parts are different from those of the non-crystalline parts, which often effectively form a matrix in which the crystals are embedded. 

---

B. D. Green. Method for creating dense drilling fiuid additive and composition therefor. Patent WO 0168787A, 2001. 

Recall that End >(M) is our notation for the ring of all D-endomorphisms of M. (We saw that End (M) is a ring with respect to componentwise addition and composition as multiplication.)... 

Process of producing high molecular weight ethylene a-olefin elastomers wtih an indenyl metallocene catalyst system Fuel oil additives and compositions Pol5unerization catalyst systems, their production and use Elastomeric ethylene copol5nners for hot melt adhesives... 

Goberdhan DG, Tack RD, Lewtas K, McAleer AM, Fetters LJ, Huang J (1996) Fuel oil additives and compositions. International Patent WO 96/28523... 

Phase transitions in binary systems, nomially measured at constant pressure and composition, usually do not take place entirely at a single temperature, but rather extend over a finite but nonzero temperature range. Figure A2.5.3 shows a temperature-mole fraction T, x) phase diagram for one of the simplest of such examples, vaporization of an ideal liquid mixture to an ideal gas mixture, all at a fixed pressure, (e.g. 1 atm). Because there is an additional composition variable, the sample path shown in tlie figure is not only at constant pressure, but also at a constant total mole fraction, here chosen to be v = 1/2. 

Atmospheric ions are important in controlling atmospheric electrical properties and conmumications and, in certain circumstances, aerosol fomiation [128. 130. 131. 138. 139, 140. 141. 142, 143, 144 and 145]. In addition, ion composition measurements can be used to derive trace neutral concentrations of the species involved in the chemistry. Figure A3.5.11 shows the total-charged-particle concentration as a frmction of... 

It is the magnitude of the various k values in Eqs. (7.1)-(7.4) that describes the intrinsic kinetic differences between the various modes of addition, and the k s plus the concentrations of the different species determine the rates at which the four kinds of additions occur. It is the proportion of different steps which determines the composition of the copolymer produced. 

Extmsion is a common way for soHd products such as plastics to emerge from closed manufacturing systems. Normally a polymer is hot when extmded and may contain additives and oligomers that are volatile at elevated tempera-tures. The result is Aiming at the extmder head. These fumes can result in employee annoyance, housekeeping problems, and, at worst, depending on composition, health ha2ards. 

More recently, Raman spectroscopy has been used to investigate the vibrational spectroscopy of polymer Hquid crystals (46) (see Liquid crystalline materials), the kinetics of polymerization (47) (see Kinetic measurements), synthetic polymers and mbbers (48), and stress and strain in fibers and composites (49) (see Composite materials). The relationship between Raman spectra and the stmcture of conjugated and conducting polymers has been reviewed (50,51). In addition, a general review of ft-Raman studies of polymers has been pubUshed (52). 

Ingredient Additions and Substitutions. Processed meat products have the greatest opportunity for fat reduction for modification because their composition can be altered by reformulation with a fat replacement (see Fat replacers). 

Dicyclopentadiene is also polymerized with tungsten-based catalysts. Because the polymerization reaction produces heavily cross-Unked resins, the polymers are manufactured in a reaction injection mol ding (RIM) process, in which all catalyst components and resin modifiers are slurried in two batches of the monomer. The first batch contains the catalyst (a mixture of WCl and WOCl, nonylphenol, acetylacetone, additives, and fillers the second batch contains the co-catalyst (a combination of an alkyl aluminum compound and a Lewis base such as ether), antioxidants, and elastomeric fillers (qv) for better moldabihty (50). Mixing two Uquids in a mold results in a rapid polymerization reaction. Its rate is controlled by the ratio between the co-catalyst and the Lewis base. Depending on the catalyst composition, solidification time of the reaction mixture can vary from two seconds to an hour. Similar catalyst systems are used for polymerization of norbomene and for norbomene copolymerization with ethyhdenenorbomene. 

The thermodynamics and physical properties of the mixture to be separated are examined. VLE nodes and saddles, LLE binodal curves, etc, are labeled. Critical features and compositions of interest are identified. A stream is selected from the source Hst. This stream is either identified as meeting all the composition objectives of a destination, or else as in need of further processing. Once an opportunistic or strategic operation is selected and incorporated into the flow sheet, any new sources or destinations are added to the respective Hsts. If a strategic separation for dealing with a particular critical feature has been implemented, then that critical feature is no longer of concern. Alternatively, additional critical features may arise through the addition of new components such as a MSA. The process is repeated until the source Hst is empty and all destination specifications have been satisfied. 

Ladle metallurgy, the treatment of Hquid steel in the ladle, is a field in which several new processes, or new combinations of old processes, continue to be developed (19,20). The objectives often include one or more of the following on a given heat more efficient methods for alloy additions and control of final chemistry improved temperature and composition homogenisation inclusion flotation desulfurization and dephosphorization sulfide and oxide shape control and vacuum degassing, especially for hydrogen and carbon monoxide to make interstitial-free (IF) steels. Electric arcs are normally used to raise the temperature of the Hquid metal (ladle arc furnace). 

---