Acrylonitrile-butadiene-styrene chemical structure

An example of this type of a safer chemical is methacrylonitrile (1) compared with acrylonitrile (2) (Figure 1.1). Both compounds are a, 3-unsaturated aliphatic nitriles, and structurally very similar, but 2 causes cancer whereas 1 does not appear to do so. Among other applications, 2 is used in the production of acrylic and modacrylic fibers, elastomers, acrylonitrile-butadiene-styrene and styrene-acrylonitrile resins, nitrile rubbers, and gas barrier resins. In a study conducted by the US National Toxicology Program (NTP) in which 2 was administered orally to mice for 2 years, there was clear evidence that it caused cancer in the treated mice (in addition to causing other toxic effects), and is classified by the NTP as a probable human carcinogen [26]. 

Characteristic functions and the representative structures of plastics additives providing marketable and durable materials are included in this chapter. Types of additives for plastics used in contact with food are listed in Table 3-1. Similar additives as for PS are used for elastomer-modified plastics forming multilayer systems (blends) and used rather exceptionally in contact with food, such as high-impact polystyrene (HIPS) or acrylonitrile-butadiene-styrene polymer (ABS). Some of the additives, stabilizers in particular, are very reactive and are present in the plastic matrix in a chemically transformed form. 

Figure 10.8 General chemical structure of poly(acrylonitrile-butadiene-styrene) (polyABS).

Other plastics are used in plant structures, although less extensively. Among these are the acrylonitrile butadiene styrene (ABS) resins, the polyvinyl fluoride resins, the polycarbonate resins, and the polyurethanes. The epoxy resins have been used extensively in structural apph-cations (such as flooring) and adhesives. Specialized apphcations include use in chemically resistant coatings and in plasters for exposed aggregate wall finishes. 

The structures listed in Table 1.6 are divided into three categories Short sequences, Long sequences, and Networks. Within the first category a sequence of placement of individual CRU is considered, within the second the placement of long sequences of CRU defines the copolymer type, while to the third belong crosslinked networks, crosslinked polymers, and chemical-type interpenetrating polymer networks. The network is a crosslinked system in which macromolecules of polymer A are crosslinked by macromolecules of polymer B [Sperling, 1992]. The composition can be expressed as, e.g., Woc -co-poly(butadiene/styrene) (75 25 wt%), or gra/i-co-poly[isoprene/ (isoprene acrylonitrile)] (85 15 mole %). 

ABS polymers are derived from acrylonitrile, butadiene, and styrene and have the following general chemical structure ... 

Emulsion polymerization requires free-radical polymerizable monomers which form the structure of the polymer. The major monomers used in emulsion polymerization include butadiene, styrene, acrylonitrile, acrylate ester and methacrylate ester monomers, vinyl acetate, acrylic acid and methacrylic acid, and vinyl chloride. All these monomers have a different stmcture and, chemical and physical properties which can be considerable influence on the course of emulsion polymerization. The first classification of emulsion polymerization process is done with respect to the nature of monomers studied up to that time. This classification is based on data for the different solubilities of monomers in water and for the different initial rates of polymerization caused by the monomer solubilities in water. According to this classification, monomers are divided into three groups. The first group includes monomers which have good solubility in water such as acrylonitrile (solubility in water 8%). The second group includes monomers having 1-3 % solubility in water (methyl methacrylate and other acrylates). The third group includes monomers practically insoluble in water (butadiene, isoprene, styrene, vinyl chloride, etc.) [12]. 

The vinylidene fluoride(VDF)-hexafluoropropylene(HFP) copolymers are well-known fluorocarbon elastomers which have excellent thermal, oil and chemical stability. Due to their inert structure, curing is more difficult compared with the hydrocarbon elastomers such as styrene-butadiene copolymer, acrylonitrile-butadiene copolymer etc. It is known that two curing recipes described below are practically usable for these fluorocarbon elastomers. 

Acrylonitrile resembles VC, a carcinogen, in structure. It is a flammable, explosive liquid (b.p. 77 C, V.P. 80 mm at 20°C). AN is a component of acrylic and modacrylic fibers produced by copolymerization with other monomers, e.g., with methyl acrylate, Me-methacrylate, vinyl acetate, VC and VDC. Other major uses of AN include copolymerizations with butadiene and styrene to produce ABS polymers, and with styrene to yield SAN resins which are used in the manufacture of plastics. Nitrile elastomers and latexes are also made with AN, as are a number of other chemicals, e.g. acrylamide and adiponitrile. Acrylonitrile is also used as a fumigant. 

Acrylonitrile ia-kr9-l6- nl-tr9l, - trel (1893) (propenenitrile, vinyl cyanide) n. (1) A monomer with the structure CH2=CH-CN. It is most useful in copolymers. Its copolymer with butadiene is nitrile rubber, and several copolymers with styrene exist that are tougher than polystyrene. It is also used as a synthetic fiber and as a chemical intermediate. (2) A raw material for the manufacture of synthetic resins and rubbers. It is a liquid at room temperatures, with a bp of 77° C and ftp of 0°C. Kadolph SJ, Langford AL (2001) Textiles. Pearson Education, New York. Odian G (2004) Principles of polymerization. Joihn Wiley and Sons, New York. 

Comparison of a PS-PMMA blend with a corresponding copolymer gave information on the chemical drift. In the analysis of a competitive modified vinyl polymer sample by SEC/FTIR, some of the components of the binder could be readily identified (vinyl chloride, ethyl methacrylate, acrylonitrile), and an epoxi-dized drying oil additive was also detected. An analysis of styrene-butadiene copolymers, including a determination of the styrene/butadiene ratio and of the micro structure of the butadiene units cis/trans, l,2-/l,4-units), was performed by Pasch et al. 

---