Acrylonitrile-butadiene rubber blending with other polymers

Polystyrene is one of the most widely used thermoplastic materials ranking behind polyolefins and PVC. Owing to their special property profile, styrene polymers are placed between commodity and speciality polymers. Since its commercial introduction in the 1930s until the present day, polystyrene has been subjected to numerous improvements. The main development directions were aimed at copolymerization of styrene with polar comonomers such as acrylonitrile, (meth)acrylates or maleic anhydride, at impact modification with different rubbers or styrene-butadiene block copolymers and at blending with other polymers such as polyphenylene ether (PPE) or polyolefins. 

Alloy a- 16i also 9- loi [F aloi, fr. OF alei, fr. aleir to combine, fr. L alligare to bind] (1604) n. A blend of a polymer or copolymer with other polymers or elastomers. An important example is a blend of styrene-acrylonitrile copolymer with butadiene-acrylonitrile rubber. The term polyblend is sometimes used for such mixtures. Some... 

Other polymers used in the PSA industry include synthetic polyisoprenes and polybutadienes, styrene-butadiene rubbers, butadiene-acrylonitrile rubbers, polychloroprenes, and some polyisobutylenes. With the exception of pure polyisobutylenes, these polymer backbones retain some unsaturation, which makes them susceptible to oxidation and UV degradation. The rubbers require compounding with tackifiers and, if desired, plasticizers or oils to make them tacky. To improve performance and to make them more processible, diene-based polymers are typically compounded with additional stabilizers, chemical crosslinkers, and solvents for coating. Emulsion polymerized styrene butadiene rubbers (SBRs) are a common basis for PSA formulation [121]. The tackified SBR PSAs show improved cohesive strength as the Mooney viscosity and percent bound styrene in the rubber increases. The peel performance typically is best with 24—40% bound styrene in the rubber. To increase adhesion to polar surfaces, carboxylated SBRs have been used for PSA formulation. Blends of SBR and natural rubber are commonly used to improve long-term stability of the adhesives. 

Several flexible polymers, such as natural rubber (NR) synthetic rubber (SR) polyalkyl acrylates copolymers of acrylonitrile, butadiene, and styrene, (ABS) and polyvinyl alkyl ethers, have been used to improve the impact resistance of PS and PVC. PS and copolymers of ethylene and propylene have been used to increase the ductility of polyphenylene oxide (PPO) and nylon 66, respectively. The mechanical properties of several other engineering plastics have been improved by blending them with thermoplastics. 

PVC can be blended with numerous other polymers to give it better processability and impact resistance. For the manufacture of food contact materials the following polymerizates and/or polymer mixtures from polymers manufactured from the above mentioned starting materials can be used Chlorinated polyolefins blends of styrene and graft copolymers and mixtures of polystyrene with polymerisate blends butadiene-acrylonitrile-copolymer blends (hard rubber) blends of ethylene and propylene, butylene, vinyl ester, and unsaturated aliphatic acids as well as salts and esters plasticizerfrec blends of methacrylic acid esters and acrylic acid esters with monofunctional saturated alcohols (Ci-C18) as well as blends of the esters of methacrylic acid butadiene and styrene as well as polymer blends of acrylic acid butyl ester and vinylpyrrolidone polyurethane manufactured from 1,6-hexamethylene diisocyanate, 1.4-butandiol and aliphatic polyesters from adipic acid and glycols. 

There are many other commercial examples of polymer blends. Polycarbonate can be blended with an acrylonitrile-butadiene-styrene terpolymer to give a PC-ABS blend. Polypropylene impact can be improved by the addition of ethylene-propylene copolymers, which are sometimes called ethylene-propylene-rubber (EPR). Ethylene, propylene, and a diene monomer (EPDM), such as ethylidene norbomene, is also used to impart impact and flexibiUty to polypropylene. 

Compatible Polyblends. When the polymeric materials are compatible in all ratios, and/or all are soluble in each other, they are generally termed polyalloys. Very few pairs of polymers are completely compatible. The best known example is the polyblend of polyCphenylene oxide) (poly-2,6-dimethyl-l,4-phenylene oxide) with high-impact polystyrene (41). which is sold under the trade name of Noryl. It is believed that the two polymers have essentially identical solubility parameters. Other examples include blends of amorphous polycaprolactone with poly(vinyl chloride) (PVC) and butadiene/acrylonitrile rubber with PVC the compatibility is a result of the "acid-base" interaction between the polar substituents (1 ). These compatible blends exhibit physical properties that are intermediate to those of the components. 

---