Acrylates reaction with alkenes

Amatore, Jutand et al. [42] have established that the oxidative addition of Phi to Pd°(OAc)(dppp) (generated from Pd(OAc)2 and 2 equiv dppp) gives the cationic complex PhPd(dppp)(dppp(0))+ this is followed by reaction of iodide ions released from Phi in the course of a catalytic reaction giving PhPdl(dppp) or/and PhPd(OAc)(dppp) whenever acetate ions are used as bases (Scheme 1.25). The reaction of PhPd(dppp)(dppp(0))+ with alkenes (styrene, methyl acrylate) is so slow that this complex must be considered as a transient complex on the way to PhPdl(dppp) and/or PhPd(OAc)(dppp). These two complexes, which exchange their anions (Scheme 1.25), are in equilibrium with the common cationic complex PhPd(DMF)(dppp)+ in DMF (Scheme 1.31) [43]. Consequently, two neutral phenyl-palladium(II) complexes are candidates, in addition to the cationic PhPdS(dppp)+, for the reaction with alkenes. The kinetics of the reaction of isolated PhPdX(dppp) (X = I, OAc) with electron-deficient, neutral and electron-rich alkenes in the absence of a base has been followed by P NMR spectroscopy in DMF. It emerges that PhPd(OAc)(dppp) reacts with styrene and methyl acrylate via PhPd(DMF)(dppp)+ that... 

Heteroaromatic compounds show similar behavior to benzene derivatives. Furan, pyrrole, thiophene, benzofuran, indole, benzothiophene, and their related compounds undergo CDC reactions with alkenes. In the case of furan, the coupling reactions with acrylates, acrylonitrile, styrenes, and... 

Combining the rate coefficients for reactions with OH, NO3 radicals, and O3 with daytime average [OH] = 2.5 x 10, nighttime polluted urban area [NO3] = 3 x 10 , and a diurnal average [O3] = 10 molecule cm concentrations gives lifetime estimates of 9 h, 35 days, and 11 days for reaction with OH and NO3 radicals and O3, respectively. Clearly, reaction with OH dictates the atmospheric lifetime of methyl acrylate. As with alkenes (Calvert et al., 2000) and methacrylates (Blanco et al., 2006), the reaction of OH... 

Chlorobenzene reacts with alkenes with bimetallic catalyses of Ni and Pd. Chlorobenzene is converted in situ into iodobenzene (14) by the Ni-cataiyzed reaction of Nal at 140 "C. NiBr2, rather than the Ni(0) complex, is found to be a good catalyst. Then the Pd-catalyzed reaction of the iodobenzene with acrylate takes place) 15]. 

Benzyl chloride reacts with alkenes bearing an EWG[8], The reaction with acrylate proceeds smoothly to give 7-phenylcrotonate (76) in the presence of BujN without a ligand. No reaction takes place with Pd(Ph,P)4[77]. 

The diazonium salts 145 are another source of arylpalladium com-plexes[114]. They are the most reactive source of arylpalladium species and the reaction can be carried out at room temperature. In addition, they can be used for alkene insertion in the absence of a phosphine ligand using Pd2(dba)3 as a catalyst. This reaction consists of the indirect substitution reaction of an aromatic nitro group with an alkene. The use of diazonium salts is more convenient and synthetically useful than the use of aryl halides, because many aryl halides are prepared from diazonium salts. Diazotization of the aniline derivative 146 in aqueous solution and subsequent insertion of acrylate catalyzed by Pd(OAc)2 by the addition of MeOH are carried out as a one-pot reaction, affording the cinnamate 147 in good yield[115]. The A-nitroso-jV-arylacetamide 148 is prepared from acetanilides and used as another precursor of arylpalladium intermediate. It is more reactive than aryl iodides and bromides and reacts with alkenes at 40 °C without addition of a phosphine ligandfl 16]. 

With a change to non-polar solvent, the reaction of ylides 269 with alkynes and alkenes changed dramatically, as shown in Scheme 10. With DM AD in toluene the ylides give pyrazolopyridines 272 in good yield (91TL4977), and with methyl propiolate (MEP) give indolizines 273 (92H(33)203). The reaction with acrylates is much less clean, but the variety of products is said to be formed from a diazene intermediate, which splits to give a diradical (93H(35)851). 

The TiX2-TADD0Late-catalyzed 1,3-dipolar q cloaddition reactions were extended to include an acrylate derivative [66]. In the absence of a catalyst, the reaction between nitrones 1 and acryloyl oxazolidinone 19b proceeded to give a mixture all eight regio-and stereoisomers (Scheme 6.23). However, application of in this case only 10 mol% of Ti(OTs)2-TADDOLate 23d as catalyst for the reaction of various nitrones 1 with alkene 19b, led to complete regioselectivity and high endo selectivity in the reaction and the endo products 21 were obtained with 48-70% ee (Scheme 6.23) [66]. 

An interesting parallel was found while the microwave-enhanced Heck reaction was explored on the C-3 position of the pyrazinone system [29]. The additional problem here was caused by the capability of the alkene to undergo Diels-Alder reaction with the 2-azadiene system of the pyrazinone. An interesting competition between the Heck reaction and the Diels-Alder reaction has been noticed, while the outcome solely depended on the substrates and the catalyst system. Microwave irradiation of a mixture of pyrazinone (Re = H), ethyl acrylate (Y = COOEt) and Pd(dppf)Cl2 resulted in the formation of a mixture of the starting material together with the cycloaddition product in a 3 1 ratio (Scheme 15). On the contrary, when Pd(OAc)2 was used in combination with the bulky phosphine ligand 2-(di-t-butylphosphino)biphenyl [41-44], the Heck reaction product was obtained as the sole product. When a mixture of the pyrazinone (Re = Ar) with ethyl acrylate or styrene and Pd(dppf)Cl2 was irradiated at 150 °C for 15 min, both catalytic systems favored the Heck reaction product with no trace of Diels-Alder adduct. 

Another important type of reactivity of palladium, namely oxidative addition to Pd(0), is the foundation for several methods of forming carbon-carbon bonds. Aryl126 and alkenyl127 halides react with alkenes in the presence of catalytic amounts of palladium to give net substitution of the halide by the alkenyl group. The reaction, known as the Heck reaction,128 is quite general and has been observed for simple alkenes, aryl-substituted alkenes, and substituted alkenes such as acrylate esters, vinyl ethers, and A-vinylamides.129... 

However, most asymmetric 1,3-dipolar cycloaddition reactions of nitrile oxides with alkenes are carried out without Lewis acids as catalysts using either chiral alkenes or chiral auxiliary compounds (with achiral alkenes). Diverse chiral alkenes are in use, such as camphor-derived chiral N-acryloylhydrazide (195), C2-symmetric l,3-diacryloyl-2,2-dimethyl-4,5-diphenylimidazolidine, chiral 3-acryloyl-2,2-dimethyl-4-phenyloxazolidine (196, 197), sugar-based ethenyl ethers (198), acrylic esters (199, 200), C-bonded vinyl-substituted sugar (201), chirally modified vinylboronic ester derived from D-( + )-mannitol (202), (l/ )-menthyl vinyl ether (203), chiral derivatives of vinylacetic acid (204), ( )-l-ethoxy-3-fluoroalkyl-3-hydroxy-4-(4-methylphenylsulfinyl)but-1 -enes (205), enantiopure Y-oxygenated-a,P-unsaturated phenyl sulfones (206), chiral (a-oxyallyl)silanes (207), and (S )-but-3-ene-1,2-diol derivatives (208). As a chiral auxiliary, diisopropyl (i ,i )-tartrate (209, 210) has been very popular. 

Cyclopropanation reactions of chloroalkanes with jt-deficient alkenes under basic phase-transfer catalysed conditions have been observed. Thus, for example, chloroacetic esters and chloroacetonitriles undergo Michael-type reactions with acrylic esters and acrylonitriles, the products of which cyclize to give cyclopropanes (see Section 6.4). 

The transition metal-catalyzed reaction of diazoalkanes with acceptor-substituted alkenes is far more intricate than reaction with simple alkenes. With acceptor-substituted alkenes the diazoalkane can undergo (transition metal-catalyzed) 1,3-dipolar cycloaddition to the olefin [651-654]. The resulting 3//-pyrazolines can either be stable or can isomerize to l//-pyrazolines. 3//-Pyrazolines can also eliminate nitrogen and collapse to cyclopropanes, even at low temperatures. Despite these potential side-reactions, several examples of catalyzed cyclopropanations of acceptor-substituted alkenes with diazoalkanes have been reported [648,655]. Substituted 2-cyclohexenones or cinnamates [642,656] have been cyclopropanated in excellent yields by treatment with diazomethane/palladium(II) acetate. Maleates, fumarates, or acrylates [642,657], on the other hand, cannot, however, be cyclopropanated under these conditions. 

Confirmation was provided by the observation that the species produced by the photolysis of two different carbene sources (88 and 89) in acetonitrile and by photolysis of the azirine 92 all had the same strong absorption band at 390 nm and all reacted with acrylonitrile at the same rate (fc=4.6 x 10 Af s" ). Rate constants were also measured for its reaction with a range of substituted alkenes, methanol and ferf-butanol. Laser flash photolysis work on the photolysis of 9-diazothioxan-threne in acetonitrile also produced a new band attributed the nitrile ylide 87 (47). The first alkyl-substituted example, acetonitrilio methylide (95), was produced in a similar way by the photolysis of diazomethane or diazirine in acetonitrile (20,21). This species showed a strong absorption at 280 nm and was trapped with a variety of electron-deficient olefinic and acetylenic dipolarophiles to give the expected cycloadducts (e.g., 96 and 97) in high yields. When diazomethane was used as the precursor, the reaction was carried out at —40 °C to minimize the rate of its cycloaddition to the dipolarophile. In the reactions with unsymmetrical dipolarophiles such as acrylonitrile, methyl acrylate, or methyl propiolate, the ratio of regioisomers was found to be 1 1. 

The auxihary acrylates 161 and 162 have been used in 1,3-dipolar cycloadditions with nitrile oxides. The camphor-derived acrylate 161 underwent a 1,3-dipolar cycloaddition with benzonitrile oxide with up to 56% de (Scheme 12.51) (263). The auxiliary in acrylate 162 is derived from naturally occurring L-quebrachitol, and provided an effective shielding of the re-face of the alkene in the reaction with benzonitrile oxide, as 90% de was obtained (273). Compound 163 was used in a reaction with the nitrone 1-pyrrole-1-oxide, and the reaction proceeded to give a complex mixture of products (274). 

Garner et al. (90,320) used aziridines substituted with Oppolzer s sultam as azomethine ylide precursors. The azomethine ylide generated from 206 added to various electron-dehcient alkenes, such as dimethyl maleate, A-phenylmalei-mide, and methyl acrylate, giving the 1,3-dipolar cycloaddition product in good yields and up to 82% de (for A-phenylmaleimide). They also used familiar azomethine ylides formed by imine tautomerization (320). Aziridines such as 207 have also been used as precursors for the chiral azomethine ylides, but in reactions with vinylene carbonates, relatively low de values were obtained (Scheme 12.59) (92). 

---