Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Catalyst acid

The traditional catalyst hydrogen fluoride, an extremely corrosive, hazardous and toxic chemical used in the production of linear alkylbenzenes (LAB s), has been successfully replaced by a solid acid catalyst, viz. fluorided silica-alumina catalyst, which does not require special material of construction (of the container), involves lower operating costs and obviates the need for an acid scrubbing system and waste disposal of calcium fluoride.  [Pg.27]

Several large-scale industrial processes utilizing heteropolyacids (HPA) catalysts exist. The two examples are hydration of the isobutylene and the polymerization of the tetrahydrofuran.  [Pg.28]

Clayzic has been used to catalyze various Friedel-Crafts reactions including those of aromatic substrates with alkyl halides, aldehydes and alcohols. Other applications include the preparation of benzothiophenes by cyclisations of [Pg.28]

However, boron trifluoride amine complexes are used to polymerize epoxies, especially the cycloaliphatic type. The cured product has very good electrical properties but relatively poor adhesive properties as indicated above. [Pg.128]

Research Using Conventional Heterogeneous Chemical-Catalyzed Reactions of Different Feedstocks for Biodiesel Production [Pg.126]

Catalyst Feedstock Alcohol Temperature (°C) Molar Ratio (AlcohohOil) Reaction Time (h) % Yield Reference c T3 CD n [Pg.126]

CaO Soybean oil Methanol Heterogeneous 60-65 Base Catalysts 12 01 1 66 Kouzu et ah, 2008 o w [Pg.126]

S0 /Ti02-Si02 Waste cooking oil Methanol 500 9 01 4 90 Peng et ah, 2008 n [Pg.126]


Derived from an aldehyde or ketone and an alcohol using an acid catalyst. Ethylene glycol or 1,3-dihydroxypropane are frequently used to give 5-or 6-member cyclic products. [Pg.10]

The most widely used reactions are those of electrophilic substitution, and under controlled conditions a maximum of three substituting groups, e.g. -NO2 (in the 1,3,5 positions) can be introduced by a nitric acid/sul-phuric acid mixture. Hot cone, sulphuric acid gives sulphonalion whilst halogens and a Lewis acid catalyst allow, e.g., chlorination or brom-ination. Other methods are required for introducing fluorine and iodine atoms. Benzene undergoes the Friedel-Crafts reaction. ... [Pg.55]

Nitrogen is incorporated in a hexagonal ring having three double bonds. The compounds in this family are those which can give a basic character to petroleum products and are thus a poison to acid catalysts. [Pg.12]

Uses of hydrogen chloride—Hydrogen chloride is sometimes used in the preparation of an ester, for example ethyl benzoate, where it acts as both an acid catalyst and a dehydrating agent. Hydrochloric acid is used primarily to produce chlorides, for example ammonium chloride. It is extensively used in the manufacture of anilme dyes, and for cleaning iron before galvanising and tin-plating. [Pg.332]

Acetaldehyde, b.p. 21°, undergoes rapid pol5unerisation under the influence of a little sulphuric acid as catalyst to give the trimeride paraldehyde, a liquid b.p. 124°, which is sparingly soluble in water. The reaction is reversible, but attains equilibrium when the conversion is about 95 per cent, complete the unreacted acetaldehyde and the acid catalyst may be removed by washing with water ... [Pg.319]

Pinacol upon dehydration with acid catalysts e.g., by distillation from 6A sulphuric acid or upon refluxing for 3—4 hours with 50 per cent, phosphoric acid or hydrated oxalic acid) is transformed into methyl ter<.-butyr ketone or plnacolone ... [Pg.349]

The condensation proceeds somewhat differently with an acid catalyst the product is termed Novolak. [Pg.1017]

The most effective Lewis-acid catalysts for the Diels-Alder reaction are hard cations. Not surprisingly, they coordinate to hard nuclei on the reacting system, typically oxygen atoms. Consequently, hard solvents are likely to affect these interactions significantly. Table 1.4 shows a selection of some solvents ranked according to their softness. Note that water is one of the hardest... [Pg.29]

In summary, water is clearly an extremely bad solvent for coordination of a hard Lewis acid to a hard Lewis base. Hence, catalysis of Diels-Alder reactions in water is expected to be difficult due to the relative inefficiency of the interactions between the Diels-Alder reactants and the Lewis-acid catalyst in this medium. [Pg.31]

First, the use of water limits the choice of Lewis-acid catalysts. The most active Lewis acids such as BFj, TiQ4 and AlClj react violently with water and cannot be used However, bivalent transition metal ions and trivalent lanthanide ions have proven to be active catalysts in aqueous solution for other organic reactions and are anticipated to be good candidates for the catalysis of aqueous Diels-Alder reactions. [Pg.48]

In summary, ligands tend to diminish the affinity of the substrate for the Lewis-acid catalyst as well as the extent of activation by this catalyst, once the ternary complex is formed. Only a few examples of ligand-accelerated catalysis " have been described... [Pg.77]

The first example of enantioselective catalysis of a Diels-Alder reaction was reported in 1979 . Since then, an extensive set of successful chiral Lewis-acid catalysts has been prepared. Some selected examples will be presented here together with their mechanistic interpretation. For a more complete... [Pg.77]

As anticipated from the complexation experiments, reaction of 4.42 with cyclopentadiene in the presence of copper(II)nitrate or ytterbium triflate was extremely slow and comparable to the rate of the reaction in the absence of Lewis-acid catalyst. Apparently, Lewis-acid catalysis of Diels-Alder reactions of p-amino ketone dienophiles is not practicable. [Pg.115]

In summary, we have demonstrated that it is possible to extend the scope of Lewis-acid catalysis of Diels-Alder reactions in water, by employing a chelating auxiliary. We envisage that analogues of 4.39 capable of undergoing a Mamrich reaction with 4.50 can be treated with reactive dienes in the presence of a Lewis-acid catalyst in water. [Pg.119]

First of all, given the well recognised promoting effects of Lewis-acids and of aqueous solvents on Diels-Alder reactions, we wanted to know if these two effects could be combined. If this would be possible, dramatic improvements of rate and endo-exo selectivity were envisaged Studies on the Diels-Alder reaction of a dienophile, specifically designed for this purpose are described in Chapter 2. It is demonstrated that Lewis-acid catalysis in an aqueous medium is indeed feasible and, as anticipated, can result in impressive enhancements of both rate and endo-exo selectivity. However, the influences of the Lewis-acid catalyst and the aqueous medium are not fully additive. It seems as if water diminishes the catalytic potential of Lewis acids just as coordination of a Lewis acid diminishes the beneficial effects of water. Still, overall, the rate of the catalysed reaction... [Pg.161]

Chapter 5 also demonstrates that a combination of Lewis-acid catalysis and micellar catalysis can lead to accelerations of enzyme-like magnitudes. Most likely, these accelerations are a consequence of an efficient interaction between the Lewis-acid catalyst and the dienophile, both of which have a high affinity for the Stem region of the micelle. Hence, hydrophobic interactions and Lewis-acid catalysis act cooperatively. Unfortunately, the strength of the hydrophobic interaction, as offered by the Cu(DS)2 micellar system, was not sufficient for extension of Lewis-acid catalysis to monodentate dienophiles. [Pg.163]

In Chapter 1 mechanistic aspects of Are Diels-Alder reaction are discussed. The literature on the effects of solvents and Lewis-acid catalysts on this reaction is surveyed. The special properties of water are reviewed and the effects of water on the Diels-Alder reaction is discussed. Finally, the effect of water on Lewis acid - Lewis base interactions is described. [Pg.173]

The rate of the Lewis-acid catalysed Diels-Alder reaction in water has been compared to that in other solvents. The results demonstrate that the expected beneficial effect of water on the Lewis-acid catalysed reaction is indeed present. However, the water-induced acceleration of the Lewis-add catalysed reaction is not as pronounced as the corresponding effect on the uncatalysed reaction. The two effects that underlie the beneficial influence of water on the uncatalysed Diels-Alder reaction, enforced hydrophobic interactions and enhanced hydrogen bonding of water to the carbonyl moiety of 1 in the activated complex, are likely to be diminished in the Lewis-acid catalysed process. Upon coordination of the Lewis-acid catalyst to the carbonyl group of the dienophile, the catalyst takes over from the hydrogen bonds an important part of the activating influence. Also the influence of enforced hydrophobic interactions is expected to be significantly reduced in the Lewis-acid catalysed Diels-Alder reaction. Obviously, the presence of the hydrophilic Lewis-acid diminished the nonpolar character of 1 in the initial state. [Pg.174]

Acids are not limited to liquid (or gaseous) systems. Solid acids also play a significant role. Acidic oxides such as silica, silica-alumina, etc. are used extensively as solid acid catalysts. New solid acid systems that are stronger than those used conventionally are frequently called solid superacids. [Pg.99]

Many superacid-catalyzed reactions were found to be carried out advantageously not only using liquid superacids but also over solid superacids, including Nafion-H or certain zeolites. We extensively studied the catalytic activity of Nafion-H and related solid acid catalysts (including supported perfluorooctanesulfonic acid and its higher ho-... [Pg.102]

To solve some of the environmental problems of mixed-acid nitration, we were able to replaee sulfuric acid with solid superacid catalysts. This allowed us to develop a novel, clean, azeotropic nitration of aromatics with nitric acid over solid perfluorinated sulfonic acid catalysts (Nafion-H). The water formed is continuously azeotroped off by an excess of aromatics, thus preventing dilution of acid. Because the disposal of spent acids of nitration represents a serious environmental problem, the use of solid aeid eatalysts is a significant improvement. [Pg.105]

A useful catalyst for asymmetric aldol additions is prepared in situ from mono-0> 2,6-diisopropoxybenzoyl)tartaric acid and BH3 -THF complex in propionitrile solution at 0 C. Aldol reactions of ketone enol silyl ethers with aldehydes were promoted by 20 mol % of this catalyst solution. The relative stereochemistry of the major adducts was assigned as Fischer- /ir o, and predominant /i -face attack of enol ethers at the aldehyde carbonyl carbon atom was found with the (/ ,/ ) nantiomer of the tartaric acid catalyst (K. Furuta, 1991). [Pg.61]


See other pages where Catalyst acid is mentioned: [Pg.22]    [Pg.157]    [Pg.199]    [Pg.227]    [Pg.420]    [Pg.709]    [Pg.1017]    [Pg.44]    [Pg.63]    [Pg.107]    [Pg.108]    [Pg.108]    [Pg.110]    [Pg.113]    [Pg.119]    [Pg.125]    [Pg.164]    [Pg.164]    [Pg.177]    [Pg.99]    [Pg.242]    [Pg.4]    [Pg.111]    [Pg.210]    [Pg.271]    [Pg.282]    [Pg.313]   
See also in sourсe #XX -- [ Pg.424 ]

See also in sourсe #XX -- [ Pg.289 ]

See also in sourсe #XX -- [ Pg.46 , Pg.118 , Pg.172 , Pg.211 ]

See also in sourсe #XX -- [ Pg.74 ]

See also in sourсe #XX -- [ Pg.28 , Pg.32 , Pg.38 ]

See also in sourсe #XX -- [ Pg.143 , Pg.170 ]

See also in sourсe #XX -- [ Pg.27 ]

See also in sourсe #XX -- [ Pg.185 , Pg.187 , Pg.188 ]

See also in sourсe #XX -- [ Pg.223 , Pg.224 , Pg.229 , Pg.241 , Pg.244 ]

See also in sourсe #XX -- [ Pg.1101 , Pg.1101 , Pg.1102 , Pg.1103 , Pg.1103 ]

See also in sourсe #XX -- [ Pg.237 ]




SEARCH



© 2019 chempedia.info