Wheat heat processing

Lawrence, B., Olsen, R.A. and Liepa, A.L., Fluidized heating process for microbial destruction in wheat flour, Chem. Eng. Prog. Symp. Series, 64 (86) (1968) 77-84. 

Theander, O Westerlund, E. Studies on chemical modifications in heat-processed starch and wheat flour. Starch/Stdrke 1987, 39, 88-93. 

The oldest way to produce caramel is by heating sucrose in an open pan, a process named caramelization. Food applications require improvement in caramel properties such as tinctorial power, stability, and compatibility with food. Caramels are produced in industry by controlled heating of a rich carbohydrate source in the presence of certain reactants. Carbohydrate sources must be rich in glucose because caramelization occurs only through the monosaccharide. Several carbohydrate sources can be used glucose, sucrose, com, wheat, and tapioca hydrolysates. The carbohydrate is added to a reaction vessel at 50°C and then heated to temperatures higher than 100°C. Different reactants such as acids, alkalis, salts, ammonium salts, and sulfites can be added, depending on the type of caramel to be obtained (Table 5.2.2). 

Purely thermal denaturation of proteins requires much longer times collagen in moist heat below 120 °C needs 30 min to denature (Meyer et ah, 2005), wheat glutens must be subjected to 200-215 °C of dry heat for 72 min (Friedman et ah, 1987), and as mentioned above, whey proteins require at least 50 °C and 30 min for texturization without the use of extrusion processing. 

Nevertheless, it is an important source of protein for humans. Processing of wheat is necessary before use, and thermal processing is often employed in some manner. Much information is available regarding the effects of milling on nutrients in wheat, but little work has been done regarding the effects of heat treatment on amino acid availability. 

Starch Liquefaction. Starch in its natural state is only degraded slowly by CC-amylases. To make the starch susceptible to enzymatic breakdown, it is necessary to gelatinize and liquefy a slurry with a 30—40% dry matter content. Gelatinization temperature depends on the type of starch (67) com is the most common source of industrial starches followed by wheat, tapioca, and potatoes. Liquefaction is achieved by adding a heat-stable a-amylase to the starch slurry. The equipment used for liquefaction may be stirred tank reactors, continuous stirred tank reactors (CSTR), or a jet cooker. Most starch processing plants liquefy the starch with a single enzyme dose in a process using a jet cooker (Fig. 9). 

---