Vinylene sulfate

Vinylene sulfate — see 2,2-dioxide under 1,3,2-Dioxathiole Vinylene thiocarbonate synthesis, 6, 780 Vinylene trithiocarbonates photolysis, 7, 181 Violapterin... 

In 1996, Mitsubishi Chemical Corporation found that cyclic sulfates, such as ethylene sulfate (43), can be used as additives in small quantities [74], and in 1998 Ube Industries, Ltd. discovered that cyclic sulfates with unsaturated bonds, such as vinylene sulfate (44), can be used as additives in small quantities [75],... 

Poly(l,3,4-oxadia2ole-2,5-diyl-vinylene) and poly(l,3,4-oxadia2ole-2,5-diyl-ethynylene) were synthesi2ed by polycondensation of fumaramide or acetylene-dicarboxamide with hydra2ine sulfate in PPA to study the effect of the two repeating units on polymer electronic and thermal properties (55). 

There have been very few examples of PTV derivatives substituted at the vinylene position. One example poly(2,5-thienylene-1,2-dimethoxy-ethenylene) 102 has been documented by Geise and co-workers and its synthesis is outlined in Scheme 1-32 [133]. Thiophene-2,5-dicarboxaldehyde 99 is polymerized using a benzoin condensation the polyacyloin precursor 100 was treated with base to obtain polydianion 101. Subsequent treatment with dimethyl sulfate affords 102, which is soluble in solvents such as chloroform, methanol, and DMF. The molar mass of the polymer obtained is rather low (M = 1010) and its band gap ( ,.=2.13 eV) is substantially blue-shifted relative to PTV itself. Despite the low effective conjugation, the material is reasonably conductive when doped with l2 (cr=0.4 S cm 1). 

Dai, " and coworkers, and others.Nanotubes have been known to adsorb gas molecules (H2, N2, O2, and H2O) through adsorption. " Some polymers have strong noncovalent interactions with the carbon nanotubes. High molecular weight ionic or electron-rich polymers coat or wrap themselves around the carbon nanotubes. Polyvinyl pyrrolidone and polystyrene sulfonate and their copolymers, polyvinyl sulfate, and poly (metaphenylene vinylene) have been used to wrap around The wrapping... 

The acid-base Nafion composite membranes include blends of Nafion with polypyrrole (PPy) [98-104], polybenzimidazole (PBI) [105-107], poly (propyleneoxide) (PPO) [108, 109], polyfurfuryl alcohol (PFA) [110], poly(vinyl alcohol) (PVA) [111-115], sulfonated phenol-formaldehyde (sPF) [116], polyvinylidene fluoride (PVdF) [117-122], poly(p-phenylene vinylene) (PPV) [123], poly(vinyl pyrrolidone) (PVP) [124] polyanifine (PANI) [125-128], polyethylene (PE) [129], poly(ethylene-terephtalate) [130], sulfated p-cyclodextrin (sCD) [131], sulfonated poly(ether ether ketone) (sPEEK) [132-135], sulfonated poly(aryl ether ketone) (sPAEK) [136], poly(arylene ether sulfone) (PAES) [137], poly(vinylimidazole) (PVl) [138], poly(vinyl pyridine) (PVPy) [139], poly (tetrafluoroethylene) (PTFE) [140-142], poly(fluorinated ethylene-propylene) [143], sulfonated polyhedral oligomeric silsesquioxane (sPOSS) [144], poly (3,4-ethylenedioxythiophene) (PEDT) [145, 146], polyrotaxanes (PR) [147], purple membrane [148], sulfonated polystyrene (PSSA) [149, 150], polystyrene-b-poly(ethylene-ran-butylene)-bpolystyrene (SEES) [151], poly(2-acrylamido-2-methyl-l-propanesulphonic acid-co-l,6-hexanediol propoxylate diacrylate-co-ethyl methacrylate) (AMPS) [152], and chitosan [31]. A binary PVA/chitosan [153] and a ternary Nafion composite with PVA, polyimide (PI) and 8-trimethoxy silylpropyl glycerin ether-1,3,6-pyrenetrisulfonic acid (TSPS) has also been reported [154]. 

---