Vapor-Induced Phase Separation VIPS

Asymmetric membranes are usually produced by phase inversion techniques. In these techniques, an initially homogeneous polymer solution becomes thermodynamically unstable due to different external effects and the phase separates into polymer-lean and polymer-rich phases. The polymer-rich phase forms the matrix of the membrane, while the polymer-lean phase, rich in solvents and nonsolvents, fills the pores. Four main techniques exist to induce phase inversion and thus to prepare asymmetric porous membranes [85] (a) thermally induced phase separation (TIPS), (b) immersion precipitation (wet casting), (c) vapor-induced phase separation (VIPS), and (d) dry (air) casting. 

Phase inversion is known to be an effective way to create porous structures in membranes, where a competitive mutual diffusion between solvent and nonsolvent occurs to yield the porous structure. Phase inversion can be described as a demixing process whereby the initially homogeneous polymer solution is transformed in a controlled manner from a liquid to a solid state [24]. Apart from immersion in a nonsolvent bath, or immersion precipitation (IP), a variety of related techniques, such as precipitation by solvent evaporation, precipitation by absorption of water Irom the vapor phase, and precipitation by air cooling, corresponding to thermally induced phase separation (TIPS), vapor-induced phase separation (VIPS), and air-casting phase separation... 

Vapor-Induced Phase Separation During the VIPS process, phase separation is induced by penetration of nonsolvent vapor, into the homogeneous polymer solution consisting of polymer and solvent(s). Mass transfer is usually much slower than that in the wet casting process thus, the VIPS process has been used to obtain membranes with symmetric, cellular, and interconnected pores [86,87],... 

---