Vanadium -fluoride

The double fluoride, ammonium hexafluorovanadate ((NH4)3VF6), forms from the oxide at 210 to 250 °C, but decomposes at 600 to 700 °C to yield pure vanadium fluoride. Examples of metal fluorides obtainable through the double fluoride route include uranium tetrafluoride, beryllium difluoride and the rare earth fluorides ... 

Infrared spectra of vanadium fluorides. Inorg. Chem. 3, 1789 (1964). 

The vanadium(V) state is very strongly oxidising hence the only stable halide is the fluoride VF5, a white, easily hydrolysed solid... 

Some properties of selected vanadium compounds are Hsted in Table 1. Detailed solubiUty data are available (3), as are physical constants of other vanadium compounds (4). Included are the lattice energy of several metavanadates and the magnetic susceptibiUty of vanadium bromides, chlorides, fluorides, oxides, and sulfides (5). 

Calcium metal is an excellent reducing agent for production of the less common metals because of the large free energy of formation of its oxides and hahdes. The following metals have been prepared by the reduction of their oxides or fluorides with calcium hafnium (22), plutonium (23), scandium (24), thorium (25), tungsten (26), uranium (27,28), vanadium (29), yttrium (30), zirconium (22,31), and most of the rare-earth metals (32). 

The known halides of vanadium, niobium and tantalum, are listed in Table 22.6. These are illustrative of the trends within this group which have already been alluded to. Vanadium(V) is only represented at present by the fluoride, and even vanadium(IV) does not form the iodide, though all the halides of vanadium(III) and vanadium(II) are known. Niobium and tantalum, on the other hand, form all the halides in the high oxidation state, and are in fact unique (apart only from protactinium) in forming pentaiodides. However in the -t-4 state, tantalum fails to form a fluoride and neither metal produces a trifluoride. In still lower oxidation states, niobium and tantalum give a number of (frequently nonstoichiometric) cluster compounds which can be considered to involve fragments of the metal lattice. 

The cobalt complex is usually formed in a hot acetate-acetic acid medium. After the formation of the cobalt colour, hydrochloric acid or nitric acid is added to decompose the complexes of most of the other heavy metals present. Iron, copper, cerium(IV), chromium(III and VI), nickel, vanadyl vanadium, and copper interfere when present in appreciable quantities. Excess of the reagent minimises the interference of iron(II) iron(III) can be removed by diethyl ether extraction from a hydrochloric acid solution. Most of the interferences can be eliminated by treatment with potassium bromate, followed by the addition of an alkali fluoride. Cobalt may also be isolated by dithizone extraction from a basic medium after copper has been removed (if necessary) from acidic solution. An alumina column may also be used to adsorb the cobalt nitroso-R-chelate anion in the presence of perchloric acid, the other elements are eluted with warm 1M nitric acid, and finally the cobalt complex with 1M sulphuric acid, and the absorbance measured at 500 nm. 

Ammonium hydrogen fluoride (NH4HF2) is useful for converting pure oxides or hydroxides to the corresponding fluorides. The reaction occurs through the formation of a double fluoride. For example, with vanadium sesquioxide the following reactions occur ... 

When nitryl fluoride is passed at ambient temperature over molybdenum, potassium, sodium, thorium, uranium or zirconium, glowing or white incandescence occurs. Mild warming is needed to initiate similar reactions of aluminium, cadmium, cobalt, iron, nickel, titanium, tungsten, vanadium or zinc, and 200-300°C for lithium or manganese. 

Halides of vanadium are known with the metal in the +2, +3, +4, and +5 oxidation states. As might be expected, the fluoride is the only well-characterized vanadium(V) halide. It can be obtained by the reaction... 

Nixon277 compared atomic absorption spectroscopy, flame photometry, mass spectroscopy, and neutron activation analysis as methods for the determination of some 21 trace elements (<100 ppm) in hard dental tissue and dental plaque silver, aluminum, arsenic, gold, barium, chromium, copper, fluoride, iron, lithium, manganese, molybdenum, nickel, lead, rubidium, antimony, selenium, tin, strontium, vanadium, and zinc. Brunelle 278) also described procedures for the determination of about 20 elements in soil using a combination of atomic absorption spectroscopy and neutron activation analysis. 

Welding Fumes, gases oxides of cadmium, chromium, fluorides, iron, manganese, nickel, nitrogen, vanadium, by-products from fluxes, coatings, electrodes... 

---