Trimethylsilyl catalysts

The hydrophobicity of the trimethylsilylated Ti-MCM-41 was estimated from the weight loss of the hydrated samples at 150°C, since this weight loss is generally attributed to physisorbed water on the surface of the mesoporous solids. It was found that there is a nearly linear correlation between amount of water adsorbed on the fully hydrated trimethylsilylated catalysts and the amount of trimethylsilyl groups bounded to the surface as it is shown in figure 5. 

The benzoic acid derivative 457 is formed by the carbonylation of iodoben-zene in aqueous DMF (1 1) without using a phosphine ligand at room temperature and 1 atm[311]. As optimum conditions for the technical synthesis of the anthranilic acid derivative 458, it has been found that A-acetyl protection, which has a chelating effect, is important[312]. Phase-transfer catalysis is combined with the Pd-catalyzed carbonylation of halides[3l3]. Carbonylation of 1,1-dibromoalkenes in the presence of a phase-transfer catalyst gives the gem-inal dicarboxylic acid 459. Use of a polar solvent is important[314]. Interestingly, addition of trimethylsilyl chloride (2 equiv.) increased yield of the lactone 460 remarkabiy[3l5]. Formate esters as a CO source and NaOR are used for the carbonylation of aryl iodides under a nitrogen atmosphere without using CO[316]. Chlorobenzene coordinated by Cr(CO)j is carbonylated with ethyl formate[3l7]. 

Tertiary alkyl chlorides have been converted to the tertiary nittiles with trimethylsilyl nittile ia dichioromethane ia the presence of SnCl (131). The reaction was appHed to the synthesis of several bridgehead nittiles, such as 1-adamantyl and 1-diamantyl nittiles from the corresponding chloro or bromo derivatives usiag SnCl or AIBr. catalysts (132). 

Me3SiCH2CH=CH2i TsOH, CH3CN, 70-80°, 1-2 h, 90-95% yield. This silylating reagent is stable to moisture. Allylsilanes can be used to protect alcohols, phenols, and carboxylic acids there is no reaction with thiophenol except when CF3S03H is used as a catalyst. The method is also applicable to the formation of r-butyldimethylsilyl derivatives the silyl ether of cyclohexanol was prepared in 95% yield from allyl-/-butyldi-methylsilane. Iodine, bromine, trimethylsilyl bromide, and trimethylsilyl iodide have also been used as catalysts. Nafion-H has been shown to be an effective catalyst. 

When potassium fluoride is combined with a variety of quaternary ammonium salts its reaction rate is accelerated and the overall yields of a vanety of halogen displacements are improved [57, p 112ff. Variables like catalyst type and moisture content of the alkali metal fluoride need to be optimized. In addition, the maximum yield is a function of two parallel reactions direct fluorination and catalyst decomposition due to its low thermal stability in the presence of fluoride ion [5,8, 59, 60] One example is trimethylsilyl fluoride, which can be prepared from the chloride by using either 18-crown-6 (Procedure 3, p 192) or Aliquot 336 in wet chlorobenzene, as illustrated in equation 35 [61],... 

For some condensations with silylated substrates as starting compounds, trimethylsilyl inflate can be used as a catalyst [103, 104, 105] Atypical example of such a reaction is the aldol type condensation of silyl enol ethers and acetals catalyzed by 1-5 mol% of trimethylsilyl inflate [103] (equation 53)... 

Similarly, trimethylsilyl inflate can be used as a catalyst for the alkylation of 2 methoxy 1,3-oxazolidines [104] or 1-acetoxyadamantane [105] with allylsilane and for the reduction of acetals to ethers with trialkylsilanes [106]... 

The discovery of palladium trimethylenemethane (TMM) cycloadditions by Trost and Chan over two decades ago constitutes one of the significant advancements in ring-construction methodology [1]. In their seminal work it was shown that in the presence of a palladium(O) catalyst, 2-[(trimethylsilyl)methyl]-2-propen-l-yl acetate (1) generates a TMM-Pd intermediate (2) that serves as the all-carbon 1,3-di-pole. It was further demonstrated that (2) could be efficiently trapped by an electron-deficient olefin to give a methylenecyclopentane via a [3-1-2] cycloaddition (Eq. 1). 

A number of approaches have been tried for modified halo-de-diazoniations using l-aryl-3,3-dialkyltriazenes, which form diazonium ions in an acid-catalyzed hydrolysis (see Sec. 13.4). Treatment of such triazenes with trimethylsilyl halides in acetonitrile at 60 °C resulted in the rapid evolution of nitrogen and in the formation of aryl halides (Ku and Barrio, 1981) without an electron transfer reagent or another catalyst. Yields with silyl bromide and with silyl iodide were 60-95%. The authors explain the reaction as shown in (Scheme 10-30). The formation of the intermediate is indicated by higher yields if electron-withdrawing substituents (X = CN, COCH3) are present. In the opinion of the present author, it is likely that the dissociation of this intermediate is not a concerted reaction, but that the dissociation of the A-aryl bond to form an aryl cation is followed by the addition of the halide. The reaction is therefore mechanistically not related to the homolytic halo-de-diazoniations. 

Pd(0) complex, or with KCN and a Ni(0) catalyst. Halides can be converted to the corresponding nitriles by treatment with trimethylsilyl cyanide in the presence of catalytic amounts of SnCl4 R3CCI + Me3SiCN —> R3CCN. ... 

A synthetically useful example uses 2-[(trimethylsilyl)methyl]-2-propen-1-yl acetate (95), which is commercially available, and a palladium or other transition metal catalyst to generate 96 or 97, which adds to double bonds, to give, in... 

Pd-catalyzed asymmetric allylic alkylation is a typical catalytic carbon-carbon bond forming reaction [ 126 -128]. The Pd-complex of the ligand (R)-3b bearing methyl, 2-biphenyl and cyclohexyl groups as the three substituents attached to the P-chirogenic phosphorus atom was found to be in situ an efficient catalyst in the asymmetric allylic alkylation of l-acetoxy-l,3-diphenylprop-2-en (4) with malonate derivatives in the presence of AT,0-bis(trimethylsilyl)acetamide (BSA) and potassium acetate, affording enantioselectivity up to 96% and quantitative... 

Some other groups have studied the opportimity to enhance the diastere-oselectivity of the transformation using the usual copper-bis(oxazohne) catalysts but modifying the carbene source. France et al. [25] observed that the use of (trimethylsilyl)diazomethane associated with a bis(oxazoline) and [Cu(CH3CN)4]PF6 as catalyst precursor allowed the formation of the trans isomer with high yield and selectivity, probably due to the steric bulk of the trimethylsilyl group. 

Method B was also used in the preparation of occluded (salen)Cr complexes. ligands Ih and li were prepared within the pores of Cr -exchanged EMT and Y zeolites, respectively [25]. These complexes were tested as catalysts in the ring opening of meso-epoxides with trimethylsilyl azide (Scheme 4). The occluded complexes showed a dramatic decrease in catalytic... 

Although SiCh 57 has been employed, e.g., in the presence of sodium azide to convert ketones into tetrazoles (Section 5.3), to condense cyclopentanone in high yields into 1.2.3.4.5.6-tris(trimethylene)benzene (Section 9.2), or used for the condensation of amino acids to polyamides (Chapter 14) with formation of Si02, enol-trimethylsilyl ethers 107 a of ketones such as cyclohexanone are cleanly converted by SiCh 57 in the presence of Hg(OAc)2 into the trichlorosilylenol ether 116, which adds benzaldehyde in the presence of the asymmetric catalyst 117 to give... 

Reaction of N,N-dimethylaniline with 1-cyanobenziodoxol 1783 to afford N-methyl-N-cyanomethylaniline 1784 in 97% yield has been discussed in Section 12.1 [31]. Analogously, oxidation of dimethylaniline with iodosobenzene and trimethylsilyl azide 19 at 0°C in CDCI3 gives the azido compound 2040 in 95% yield, iodobenzene, and HMDSO 7 [194, 195] (Scheme 12.56). Likewise, the nucleophilic catalyst 4-dimethylaminopyridine (DMAP) is oxidized, in 95% yield, to the azide 2041, which is too sensitive toward hydrolysis to 4-N-methylaminopyri-dine to enable isolation [194, 195]. Amides such as 2042, in combination with tri-... 

In an analogous reaction the catechol titanate 2136 is converted by TMSOTf 20, via 2137, to give the bis-(trimethylsilyl)ester 2138, which eliminates HMDSO 7 to regenerate 2136 [65] (Scheme 13.18). The intermediate compound 2137 apparently serves as catalyst for the reaction of l-0-trimethylsilyl-2,3,5-tri-0-benzyl-D-arabino-furanose with O-silylated alcohols to afford mainly the l-/ -arabinofuranosides. 

All 10 PF resins were produced with Ba(OH)2 catalyst for 300 min with varying F/P molar ratio, OH/P wt %, and reaction temperatureffable 1). The resins were stored frozen at -18H until analysis. Molecular species in resol were analyzed by GO after trimethylsilylation of sample with N,0-bis(trimethylsilyl)trifluoracetamide in pyridine[2]. A glass column (3 m x 2 mm I.D.) packed with 3% OV-1 on 100-120 mesh Chromosorh W HP was applied. Injection... 

---