Transition vanadium

Phase transitions are involved in critical temperature thermistors. Vanadium, VO2, and vanadium trioxide [1314-34-7] V2O3, have semiconductors—metal transitions in which the conductivity decreases by several orders of magnitude on cooling. Electronic phase transitions are also observed in superconducting ceramics like YBa2Cu30y but here the conductivity increases sharply on cooling through the phase transition. 

HDPE resias are produced ia industry with several classes of catalysts, ie, catalysts based on chromium oxides (Phillips), catalysts utilising organochromium compounds, catalysts based on titanium or vanadium compounds (Ziegler), and metallocene catalysts (33—35). A large number of additional catalysts have been developed by utilising transition metals such as scandium, cobalt, nickel, niobium, molybdenum, tungsten, palladium, rhodium, mthenium, lanthanides, and actinides (33—35) none of these, however, are commercially significant. 

The action of redox metal promoters with MEKP appears to be highly specific. Cobalt salts appear to be a unique component of commercial redox systems, although vanadium appears to provide similar activity with MEKP. Cobalt activity can be supplemented by potassium and 2inc naphthenates in systems requiring low cured resin color lithium and lead naphthenates also act in a similar role. Quaternary ammonium salts (14) and tertiary amines accelerate the reaction rate of redox catalyst systems. The tertiary amines form beneficial complexes with the cobalt promoters, faciUtating the transition to the lower oxidation state. Copper naphthenate exerts a unique influence over cure rate in redox systems and is used widely to delay cure and reduce exotherm development during the cross-linking reaction. 

Vanadium [7440-62-2] V, (at. no. 23, at. wt 50.942) is a member of Group 5 (VB) of the Periodic Table. It is a gray body-centered-cubic metal in the first transition series (electronic configuration When highly pure, it is very soft and dutile. Because of its high melting point, vanadium is referred to as a... 

Possibly because of price and performance competition from chromium, titanium, and other transition elements, only about a dozen vanadium compounds are commercially significant of these, vanadium pentoxide is dominant. 

Vanadium, a typical transition element, displays weU-cliaractetized valence states of 2—5 in solid compounds and in solutions. Valence states of —1 and 0 may occur in solid compounds, eg, the carbonyl and certain complexes. In oxidation state 5, vanadium is diamagnetic and forms colorless, pale yeUow, or red compounds. In lower oxidation states, the presence of one or more 3d electrons, usually unpaired, results in paramagnetic and colored compounds. All compounds of vanadium having unpaired electrons are colored, but because the absorption spectra may be complex, a specific color does not necessarily correspond to a particular oxidation state. As an illustration, vanadium(IV) oxy salts are generally blue, whereas vanadium(IV) chloride is deep red. Differences over the valence range of 2—5 are shown in Table 2. The stmcture of vanadium compounds has been discussed (6,7). 

Although trialkyl- and triarylbismuthines are much weaker donors than the corresponding phosphoms, arsenic, and antimony compounds, they have nevertheless been employed to a considerable extent as ligands in transition metal complexes. The metals coordinated to the bismuth in these complexes include chromium (72—77), cobalt (78,79), iridium (80), iron (77,81,82), manganese (83,84), molybdenum (72,75—77,85—89), nickel (75,79,90,91), niobium (92), rhodium (93,94), silver (95—97), tungsten (72,75—77,87,89), uranium (98), and vanadium (99). The coordination compounds formed from tertiary bismuthines are less stable than those formed from tertiary phosphines, arsines, or stibines. 

MetaUic conduction occurs in transition-metal oxides such as ReO, vanadium(II) oxide [12035-98-2] VO, titanium(II) oxide [12137-20-17,... 

In general, octahedral complexes of transition-metal ions possessing 0, 1, or 2 electrons beyond the electronic configuration of the preceding noble gas, ie, i/, (P configurations, are labile. The (P systems are usually inert the relative lability of vanadium(II) may be charge and/or redox related. 

Isotope Effects on Superconductivity. Substitution of hydrogen by deuterium affects the superconducting transition temperature of palladium hydride [26929-60-2] PdH2 (54,55), palladium silver hydride, Pd Ag H D ( 6), and vanadium—2itconium—hydride, N(57). 

Two classes of metals have been examined for potential use as catalytic materials for automobile exhaust control. These consist of some of the transitional base metal series, for instance, cobalt, copper, chromium, nickel, manganese, and vanadium and the precious metal series consisting of platinum [7440-06-4], Pt palladium [7440-05-3], Pd rhodium [7440-16-6], Rh iridium, [7439-88-5], Ir and mthenium [7440-18-8], Ru. Specific catalyst activities are shown in Table 3. 

In many of the transition metals, such as titanium, vanadium and molybdenum, carbon, nitrogen and oxygen atoms can fit into octahedral holes, and hydrogen into the teualredral holes. The fit here is estimated by assuming the atoms all have incompressible radii, and die contact must be such tlrat tire interstitial atoms do not rattle around in the holes. 

As in the preceding transition-metal groups, the refractory behaviour and the relative stabilities of the different oxidation states can be explained by the role of the (n — l)d electrons. Compared to vanadium, chromium has a lower mp, bp and enthalpy of atomization which implies that the 3d electrons are now just beginning to enter the inert electron core of the atom, and so are less readily delocalized by the formation of metal bonds. This is reflected too in the fact that the most stable oxidation state has dropped to +3, while chromium(VI) is strongly oxidizing ... 

The ionization energy of vanadium from the ground state is 650.2 kJ/moL Assume that the transition in (3) is from the ground state to an excited state. If that is the case, calculate the ionization energy from the excited state. 

A thin layer deposited between the electrode and the charge transport material can be used to modify the injection process. Some of these arc (relatively poor) conductors and should be viewed as electrode materials in their own right, for example the polymers polyaniline (PAni) [81-83] and polyethylenedioxythiophene (PEDT or PEDOT) [83, 841 heavily doped with anions to be intrinsically conducting. They have work functions of approximately 5.0 cV [75] and therefore are used as anode materials, typically on top of 1TO, which is present to provide lateral conductivity. Thin layers of transition metal oxide on ITO have also been shown [74J to have better injection properties than ITO itself. Again these materials (oxides of ruthenium, molybdenum or vanadium) have high work functions, but because of their low conductivity cannot be used alone as the electrode. 

The maximum oxidation state observed for the elements first increases and then decreases as we go across the transition row. Thus we have 4-3 for scandium, 4-4 for titanium, 4-5 for vanadium, 4-6 for chromium, and 4-7 for manganese. The 4-7 represents the highest value observed for this transition row. After manganese, the maximum value diminishes as we continue toward the end of the transition row. 

The relatively high cost and lack of domestic supply of noble metals has spurred considerable efforts toward the development of nonnoble metal catalysts for automobile exhaust control. A very large number of base metal oxides and mixtures of oxides have been considered, especially the transition metals, such as copper, chromium, nickel, manganese, cobalt vanadium, and iron. Particularly prominent are the copper chromites, which are mixtures of the oxides of copper and chromium, with various promoters added. These materials are active in the oxidation of CO and hydrocarbons, as well as in the reduction of NO in the presence of CO (55-59). Rare earth oxides, such as lanthanum cobaltate and lanthanum lead manganite with Perovskite structure, have been investigated for CO oxidation, but have not been tested and shown to be sufficiently active under realistic and demanding conditions (60-63). Hopcalities are out-... 

Hydrogen reduction has a major advantage in that the reaction generally takes place at lower temperature than the equivalent decomposition reaction. It is used extensively in the deposition of transition metals from their halides, particularly the metals of Groups Va, (vanadium, niobium, and tantalum) and Via (chromium, molybdenum, and tungsten). The halide reduction of Group IVa metals (titanium, zirconium, and hafnium) is more difficult because their halides are more stable. 

---