Transition metal catalysts polymerization

T.J. Pullukat, R.E. Hoff, M. Shida, in R. Quirk (Ed.), Titanium Modified Chromium Catalysts for Ethylene Polymerization, Symposium on Transition Metal Catalyst Polymerization, Proceedings, Michigan Molecular Institute, Harwood Academic Publishers, 1981, p. 697. 

The addition of alcohols to form the 3-alkoxypropionates is readily carried out with strongly basic catalyst (25). If the alcohol groups are different, ester interchange gives a mixture of products. Anionic polymerization to oligomeric acrylate esters can be obtained with appropriate control of reaction conditions. The 3-aIkoxypropionates can be cleaved in the presence of acid catalysts to generate acrylates (26). Development of transition-metal catalysts for carbonylation of olefins provides routes to both 3-aIkoxypropionates and 3-acryl-oxypropionates (27,28). Hence these are potential intermediates to acrylates from ethylene and carbon monoxide. 

Chemical Properties. Higher a-olefins are exceedingly reactive because their double bond provides the reactive site for catalytic activation as well as numerous radical and ionic reactions. These olefins also participate in additional reactions, such as oxidations, hydrogenation, double-bond isomerization, complex formation with transition-metal derivatives, polymerization, and copolymerization with other olefins in the presence of Ziegler-Natta, metallocene, and cationic catalysts. All olefins readily form peroxides by exposure to air. 

The discovery by Ziegler that ethylene and propylene can be polymerized with transition-metal salts reduced with trialkyl aluminum gave impetus to investigations of the polymerization of conjugated dienes (7—9). In 1955, synthetic polyisoprene (90—97% tij -l,4) was prepared using two new catalysts. A transition-metal catalyst was developed at B. E. Goodrich (10) and an alkaU metal catalyst was developed at the Ekestone Tke Rubber Co. (11). Both catalysts were used to prepare tij -l,4-polyisoprene on a commercial scale (9—19). 

When a mixture of alkenes 1 and 2 or an unsymmetrically substituted alkene 3 is treated with an appropriate transition-metal catalyst, a mixture of products (including fi/Z-isomers) from apparent interchange of alkylidene moieties is obtained by a process called alkene metathesis. With the development of new catalysts in recent years, alkene metathesis has become a useful synthetic method. Special synthetic applications are, for example, ring-closing metathesis (RCM) and ring-opening metathesis polymerization (ROM) (see below). 

The previous sections show that certain ionic liquids, namely the chloroalumi-nate(III) ionic liquids, are capable of acting both as catalyst and as solvent for the polymerization of certain olefins, although in a somewhat uncontrolled manner, and that other ionic liquids, namely the non-chloroaluminate(III) ionic liquids, are capable of acting as solvents for free radical polymerization processes. In attempts to carry out polymerization reactions in a more controlled manner, several studies have used dissolved transition metal catalysts in ambient-temperature ionic liquids and have investigated the compatibility of the catalyst towards a range of polymerization systems. 

Acyclic diene molecules are capable of undergoing intramolecular and intermolec-ular reactions in the presence of certain transition metal catalysts molybdenum alkylidene and ruthenium carbene complexes, for example [50, 51]. The intramolecular reaction, called ring-closing olefin metathesis (RCM), affords cyclic compounds, while the intermolecular reaction, called acyclic diene metathesis (ADMET) polymerization, provides oligomers and polymers. Alteration of the dilution of the reaction mixture can to some extent control the intrinsic competition between RCM and ADMET. 

In the process of radical polymerization a monomolecular short stop of the kinetic chain arises from the delocalization of the unpaired electron along the conjugated chain and from the competition of the developing polyconjugated system with the monomer for the delivery of rr-electrons to the nf-orbitals of a transition metal catalyst in the ionic coordination process. Such a deactivation of the active center may also be due to an interaction with the conjugated bonds of systems which have already been formed. 

ADMET is quite possibly the most flexible transition-metal-catalyzed polymerization route known to date. With the introduction of new, functionality-tolerant robust catalysts, the primary limitation of this chemistry involves the synthesis and cost of the diene monomer that is used. ADMET gives the chemist a powerful tool for the synthesis of polymers not easily accessible via other means, and in this chapter, we designate the key elements of ADMET. We detail the synthetic techniques required to perform this reaction and discuss the wide range of properties observed from the variety of polymers that can be synthesized. For example, branched and functionalized polymers produced by this route provide excellent models (after quantitative hydrogenation) for the study of many large-volume commercial copolymers, and the synthesis of reactive carbosilane polymers provides a flexible route to solvent-resistant elastomers with variable properties. Telechelic oligomers can also be made which offer an excellent means for polymer modification or incorporation into block copolymers. All of these examples illustrate the versatility of ADMET. 

Transition metal coupling polymerization has also been used to synthesize optically active polymers with stable main-chain chirality such as polymers 33, 34, 35, and 36 by using optically active monomers.29-31 These polymers are useful for chiral separation and asymmetric catalysis. For example, polymers 33 and 34 have been used as polymeric chiral catalysts for asymmetric catalysis. Due... 

Development of more efficient transition metal catalyst systems including using novel and efficient ligands has been one of the focuses in organometallic chemistry.35 The developments in this area will allow not only to synthesize polymers under mild conditions with higher or desired molecular weights but also to use less expensive, more readily available materials for the polymerizations. 

Polycondensation pol5mers, like polyesters or polyamides, are obtained by condensation reactions of monomers, which entail elimination of small molecules (e.g. water or a hydrogen halide), usually under acid/ base catalysis conditions. Polyolefins and polyacrylates are typical polyaddition products, which can be obtained by radical, ionic and transition metal catalyzed polymerization. The process usually requires an initiator (a radical precursor, a salt, electromagnetic radiation) or a catalyst (a transition metal). Cross-linked polyaddition pol5mers have been almost exclusively used so far as catalytic supports, in academic research, with few exceptions (for examples of metal catalysts on polyamides see Ref. [95-98]). 

The mechanistic similarity between Ziegler-Natta polymerization of olefins and the alkene cyclization reactions described above suggested that early transition metal catalysts would be effective catalysts for the coupling of... 

Zinc compounds have recently been used as pre-catalysts for the polymerization of lactides and the co-polymerization of epoxides and carbon dioxide (see Sections 2.06.8-2.06.12). The active catalysts in these reactions are not organozinc compounds, but their protonolyzed products. A few well-defined organozinc compounds, however, have been used as co-catalysts and chain-transfer reagents in the transition metal-catalyzed polymerization of olefins. 

P, N, O, S, or C based, which favor covalent bonding and stabilize low oxidation states) due to the metals higher electronegativity and lower oxidation states [24], In recent years, late transition metal catalysts [25-29] have attracted attention not only for the polymerization of a-olefins, but more importantly for the copolymerization of hydrocarbon monomers with readily available polar monomers such as acrylates, vinyl ethers, and vinyl acetate [27 and references therein]. 

---