Toxic liquid, inorganic

STl Organic, toxic, liquid ST2 Organic, toxic, solid ST3 Inorganic, toxic, liquid ST4 Inorganic, toxic, solid... 

TOXIC LIQUID, corrosive, inorganic. ti.o.s. (When Inhalation Hazard is on 4 package or sliippuig paper. > lOOO 1.2 3.3 1.500 3.5 5.9... 

Toxic-Inorganic Liquid Chemical pH Constituent analysis Oil and grease content Total suspended solids Total dissolved solids... 

Covers, H., Ruepert, C., Stevens, T.]., and van Leeuwen, C.]. Experimental determination and prediction of partition coefficients of thioureas and their toxicity to Photobacterium phosphoreum, Chemosphere, 15(4) 383-393, 1986. Govindarajan, M. and Sabarathinam, P. Effect of some inorganic salts on the ternary liquid-liquid equilibria of the water + 4-methyl-2-pentanone + propanoic or butanoic acid at 35 °C, / Chem. Eng. Data, 42(2) 402-408, 1997. 

Contaminants may be adsorbed on the solid phase or on suspended particles in the liquid phase. Environmental factors, such as temperature, pH, and water content in the subsurface prior to contamination, also affect the nature of contaminant adsorption. Other physical processes of retention include precipitation, deposition, and trapping. Under natural conditions, pollutants often consist of more than a single contaminant, comprising a mixture of organic and inorganic toxic compounds. Each of these compounds can react differently with the existing minerals and chemicals in the subsurface. 

Results of the EDAR index application to these types of matrices are provided in Table 5. Samples were selected for toxicity screening to ensure the presence of different types of contaminants commonly present in complex wastes (e.g., hydrocarbons, DOC, nutrients, ammonia, inorganic anions and cations, pesticides) and other matrices (e.g., sediments and sludges, solid materials, liquid... 

Selenium oxychloride is not the only inorganic solvent used for liquid lasers, several studies use as solvent phosphorus oxychloride, POCl3 (Blumenthal et al., 1968 Brecher and French, 1969 Brinkschulte et al., 1972). Although this solvent is a worse host for ionic salts due to its lower dielectric constant, it is much more attractive for liquid laser uses since it is far less toxic and corrosive than SeOCl2. The approach for the preparation of POCl3 solutions is slightly... 

---