Titanium synthesis

Another important class of titanates that can be produced by hydrothermal synthesis processes are those in the lead zirconate—lead titanate (PZT) family. These piezoelectric materials are widely used in manufacture of ultrasonic transducers, sensors, and minia ture actuators. The electrical properties of these materials are derived from the formation of a homogeneous soHd solution of the oxide end members. The process consists of preparing a coprecipitated titanium—zirconium hydroxide gel. The gel reacts with lead oxide in water to form crystalline PZT particles having an average size of about 1 ]lni (Eig. 3b). A process has been developed at BatteUe (Columbus, Ohio) to the pilot-scale level (5-kg/h). 

The second type of solution polymerization concept uses mixtures of supercritical ethylene and molten PE as the medium for ethylene polymerization. Some reactors previously used for free-radical ethylene polymerization in supercritical ethylene at high pressure (see Olefin POLYMERS,LOW DENSITY polyethylene) were converted for the catalytic synthesis of LLDPE. Both stirred and tubular autoclaves operating at 30—200 MPa (4,500—30,000 psig) and 170—350°C can also be used for this purpose. Residence times in these reactors are short, from 1 to 5 minutes. Three types of catalysts are used in these processes. The first type includes pseudo-homogeneous Ziegler catalysts. In this case, all catalyst components are introduced into a reactor as hquids or solutions but form soHd catalysts when combined in the reactor. Examples of such catalysts include titanium tetrachloride as well as its mixtures with vanadium oxytrichloride and a trialkyl aluminum compound (53,54). The second type of catalysts are soHd Ziegler catalysts (55). Both of these catalysts produce compositionaHy nonuniform LLDPE resins. Exxon Chemical Company uses a third type of catalysts, metallocene catalysts, in a similar solution process to produce uniformly branched ethylene copolymers with 1-butene and 1-hexene called Exact resins (56). 

In this process, catalysts, such as boric acid, molybdenum oxide, zirconium, and titanium tetrachloride or ammonium molybdate, are used to accelerate the reaction. The synthesis is either carried out in a solvent (aUphatic hydrocarbon, trichlorobenzene, quinoline, pyridine, glycols, or alcohols) at approximately 200°C or without a solvent at 300°C (51,52). 

A continuous process has been described (14) which can produce either the amide or the nitrile by adjusting the reaction conditions. Boric acid has been used as a catalyst in the amidation of fatty acid (15). Other catalysts employed include alumina (16), titanium, and 2inc alkoxides (17). The difficulty of complete reaction during synthesis has been explained by the formation of RCOOH NH RCOO , a stable intermediate acid ammonium salt (18). 

Direct synthesis from nitrogen and finely divided titanium metal can be achieved at temperatures of >ca 1200° C (4). Typically, titanium sponge or powder is heated in an ammonia- or nitrogen-filled furnace and the product is subsequently milled and classified. 

Other preparative methods include direct synthesis from the elements, reaction between gaseous hydrogen fluoride and titanium tetrachloride, and decomposition of barium hexafluorotitanate [31252-69-6] BaTiF, or ammonium, (NH 2TiFg. 

Titanium Dibromide. Titanium dibromide [13873-04-5] a black crystalline soHd, density 4310 kg/m, mp 1025°C, has a cadmium iodide-type stmcture and is readily oxidized to trivalent titanium by water. Spontaneously flammable in air (142), it can be prepared by direct synthesis from the elements, by reaction of the tetrabromide with titanium, or by thermal decomposition of titanium tribromide. This last reaction must be carried out either at or below 400°C, because at higher temperatures the dibromide itself disproportionates. 

Titanium Silicides. The titanium—silicon system includes Ti Si, Ti Si, TiSi, and TiSi (154). Physical properties are summarized in Table 18. Direct synthesis by heating the elements in vacuo or in a protective atmosphere is possible. In the latter case, it is convenient to use titanium hydride instead of titanium metal. Other preparative methods include high temperature electrolysis of molten salt baths containing titanium dioxide and alkalifluorosiUcate (155) reaction of TiCl, SiCl, and H2 at ca 1150°C, using appropriate reactant quantities for both TiSi and TiSi2 (156) and, for Ti Si, reaction between titanium dioxide and calcium siUcide at ca 1200°C, followed by dissolution of excess lime and calcium siUcate in acetic acid. 

TYZOR TPT and the tetraethyl titanate, TYZOR ET [3087-36-3], have also been prepared by direct electrochemical synthesis. The reaction involves anode dissolution of titanium in the presence of the appropriate alcohol and a conductive admixture (3). 

Synthesis. Titanium alkoxy halides are intermediates in the preparation of alkoxides from a titanium tetrahaUde (except the fluoride) and an alcohol or phenol. If TiCl is heated with excess primary alcohol, only two chlorine atoms can be replaced and the product is dialkoxydichlorotitanium alcoholate, (RO)2TiCl2 ROH. The yields are poor, and some alcohols, such as aHyl, ben2yl, and /-butyl alcohols, are converted to chlorides (46). Using excess TiCl at 0°C, the trichloride ROTiCl is obtained nearly quantitatively, even from sec- and / f/-alcohols (47,48). 

The advantages of titanium complexes over other metallic complexes is high selectivity, which can be readily adjusted by proper selection of ligands. Moreover, they are relative iaert to redox processes. The most common synthesis of chiral titanium complexes iavolves displacement of chloride or alkoxide groups on titanium with a chiral ligand, L ... 

Owing to their particular interest two individual reactions will now be discussed separately. The reaction of methoxycarbonylhydrazine and 3-bromo-2,4-pentanedione affords, in addition to the expected pyrazole (608), a pyrazolium salt (609), the structure of which was established by X-ray crystallography (74TL1987). Aryldiazonium salts have been used instead of arylhydrazines in the synthesis of pyrazolines (610) and pyrazoles (611) (82JOC81). These compounds are formed by free radical decomposition of diazonium salts by titanium(n) chloride in the presence of a,/3-ethylenic ketones. 

Titanium trichloride [7705-07-9] M 154.3, m >500 , pKj 2.55 (for hydrolysis of Ti to TiOH ). Brown purple powder that is very reactive with H2O and pyrophoric when dry. It should be manipulated in a dry box. It is soluble in CH2CI2 and tetrahydrofuran and is used as a M solution in these solvents in the ratio of 2 1, and stored under N2. It is a powerful reducing agent. [Inorg Synth 6 52 I960, Synthesis 833 7989.]... 

Triflates of titanium and tin are effective catalysts for various condensations of carbonyl compounds [I2I, 122, 123, 124, 125] Claisen and Dieckmann type condensations between ester functions proceed under mild conditions in the presence of dichlorobis(trifluoromethanesulfonyloxy)titaiiiuin(rV) and a tertiary amine (equations 59 and 60) These highly regio- and stereoselective condensations were used successfully m the synthesis of carbohydrates [122]... 

Synthesis of Enamines Utilizing Various Compounds of Phosphorus Titanium, Boron, Arsenic, and Mercury. ... 

---