Three-necked flask

Assemble a 250 ml. three-necked flask, fitted with a stirrer, a reflux condenser and a dropping-funnel, as in Fig. 22(A) and (j), p. 43, or Fig. 23(c), p. 46 (or a two-necked flask, with the funnel fitted by a grooved cork (p. 255) to the top of the condenser). Place 40 ml. of ethanol in the flask, and then add 2-3 g. of sodium cut into small pieces. When all the sodium has dissolved, heat the stirred solution on the water-bath, and run in from the funnel 17 g. (17 ml.) of ethyl malonate and then (more slowly) io-2 g. (12 ml.) of mesityl oxide, the reaction-mixture meanwhile forming a thick slurry. Boil the stirred mixture under reflux for i hour, and then add a solution of 10 g. of sodium hydroxide in 50 ml. of water, and continue boiling the pale honey-coloured solution for ij hours more. 

Fit a 250 ml. three-necked flask with a stirrer, a reflux condenser and a dropping-funnel. (Alternatively, use a two-necked flask, with the dropping-funnel fitted by a grooved cork into the condenser.) Place 15 g. of powdered thiourea and 40 ml. of water in the flask and stir the mixture whilst 18 5 g. (16 ml.) of chloroacetone are added dropwise over a period of 20 minutes the thiourea will dissolve and the temperature of the mixture... 

A common operation in practical organic chemistry is for stirring, refluxing, and addition of a liquid from a dropping funnel to be carri on simultaneously. The most convenient apparatus for this purpose is a three-necked flask, fitted as in Fig. 11, 7, 11, a. If a three-necked flask is not available, the three-way adapter inserted into a bolt-head flask (Fig. 77, 7, 11, 6) may be used. A further simplification, suitable for elementary students, is to employ a two-way adapter as in Fig. 77, 7, 11, c the stirrer passes through a closely-fitting glass sleeve which is extended... 

If preferred, the following alternative procedure may be adopted. The absolute alcohol is placed in a 1 5 or 2 litre three-necked flask equipped with a double surface reflux condenser and a mercury-sealed mechanical stirrqr the third neck is closed with a dry stopper. The sodium is introduced and, when it has reacted completely, the ester is added and the mixture is gently refluxed for 2 hours. The reflux condenser is then rapidly disconnected and arranged for downward distillation with the aid of a short still head or knee tube. The other experimental details are as above except that the mixture is stirred during the distillation bumping is thus reduced to a minimum. 

Hydriodic acid. A 1-5 litre three-necked flask is charged with a mixture of 480 g. of iodine and 600 ml. of water. The central aperture is fitted with a stopper carrying an efficient mechanical stirrer leading... 

Method 2. It is convenient to prepare the powdered sodium in the flask in which the subsequent reaction is to be carried out this is usually a three-necked flask. Into a 1-litre three-necked flask fitted with a... 

Two forms of triple neck adapters are shown in Fig. 11, 56, 11. The sizes of cones and sockets are similar to those for the double neck adapter. These adapters convert an ordinary flask into what is virtually a three-necked flask. 

Separatory funnels. For many operations the globular form (compare Fig. II, 1, 5, c) with 14, 19 or 24 cone on the stem and 14 or 19 socket for the stopper, is convenient. For some purposes, e.g., when used on a three-necked flask or with a multiple adapter, the cylindrical... 

Reactions under reflux with stirring. One assembly is depicted in Fig. II, 60, 6 a three-necked flask may be substituted for the flask and adapter. 

The phosphoric acid may be recovered by diluting the residue in the three-necked flask with water, filtering, and then evaporating with a little nitric acid to a concentration of about 85 per cent. 

Fit the central neck of a 1-litre three-necked flask with an efficient double surface condenser and close the two side necks with corks (1). Place 52 g. (59-5 ml.) of ethyl n-valerate (Section 111,104) and 800 ml. of super-diy ethyl alcohol (Section 11,47, 5) (2) in the flask. Add 95 g. of clean sodium in small pieces through one of the apertures at such... 

Dichlorobutane. Place 22-5g. of redistilled 1 4-butanediol and 3 ml. of dry pyridine in a 500 ml. three necked flask fitted with a reflux condenser, mechanical stirrer and thermometer. Immerse the flask in an ice bath. Add 116 g. (71 ml.) of redistilled thionyl chloride dropwise fix>m a dropping funnel (inserted into the top of the condenser) to the vigorously stirred mixture at such a rate that the temperature remains at 5-10°. When the addition is complete, remove the ice bath, keep the mixture overnight, and then reflux for 3 hours. Cool, add ice water cautiously and extract with ether. Wash the ethereal extract successively with 10 per cent sodium bicarbonate solution and water, dry with anhydrous magnesium sulphate and distil. Collect the 1 4-dichloro-butane at 55-5-56-5°/14 mm. the yield is 35 g. The b.p. under atmospheric pressure is 154 155°. 

Allyl Bromide. Introduce into a 1-litre three-necked flask 250 g. (169 ml.) of 48 per cent, hydrobromic acid and then 75 g. (40-5 ml.) of concentrated sulphuric acid in portions, with shaking Anally add 58 g. (68 ml.) of pure allyl alcohol (Section 111,140). Fit the flask with a separatory funnel, a mechanical stirrer and an efficient condenser (preferably of the double surface type) set for downward distillation connect the flask to the condenser by a wide (6-8 mm.) bent tube. Place 75 g. (40 5 ml.) of concentrated sulphuric acid in the separatory funnel, set the stirrer in motion, and allow the acid to flow slowly into the warm solution. The allyl bromide will distil over (< 30 minutes). Wash the distillate with 5 per cent, sodium carbonate solution, followed by water, dry over anhydrous calcium chloride, and distil from a Claisen flask with a fractionating side arm or through a short column. The yield of allyl bromide, b.p. 69-72°, is 112 g. There is a small high-boiling fraction containing propylene dibromide. 

Alternatively, place the mixture of alcohol and red phosphorus in a 500 ml. three-necked flask fitted with a mechanical stirrer, dropping funnel and double surface condenser. Heat the phosphorus - alcohol mixture to about 250°, and add the bromine whilst stirring vigorously. Work up the reaction product as above. 

In a 500 ml. three-necked flask, equipped with a thermometer, a sealed Hershberg stirrer and a reflux condenser, place 32-5 g. of phosphoric oxide and add 115-5 g. (67-5 ml.) of 85 per cent, orthophosphoric acid (1). When the stirred mixture has cooled to room temperature, introduce 166 g. of potassium iodide and 22-5 g. of redistilled 1 4-butanediol (b.p. 228-230° or 133-135°/18 mm.). Heat the mixture with stirring at 100-120° for 4 hours. Cool the stirred mixture to room temperature and add 75 ml. of water and 125 ml. of ether. Separate the ethereal layer, decolourise it by shaking with 25 ml. of 10 per cent, sodium thiosulphate solution, wash with 100 ml. of cold, saturated sodium chloride solution, and dry with anhydrous magnesium sulphate. Remove the ether by flash distillation (Section 11,13 compare Fig. II, 13, 4) on a steam bath and distil the residue from a Claisen flask with fractionating side arm under diminished pressure. Collect the 1 4-diiodobutane at 110°/6 mm. the yield is 65 g. 

In a 1-litre three-necked flask, mounted on a steam bath and provided respectively with a separatory funnel, mechanical stirrer and double surface condenser, place 165 g. of bromoform (96 per cent.). Add 10 ml. of a solution of sodium arsenite made by dissolving 77 g. of A.R. arsenious oxide and 148 g. of A.R. sodium hydroxide in 475 ml. of water. Warm the mixture gently to start the reaction, and introduce the remainder of the sodium arsenite solution during 30-45 minutes at such a rate that the mixture refluxes gently. Subsequently heat the flask on the steam bath for 3-4 hours. Steam distil the reaction mixture (Fig. 11, 41, 1) and separate the lower layer of methylene bromide (79 g.). Extract the aqueous layer with about 100 ml. of ether a further 3 g. of methylene bromide is obtained. Dry with 3-4 g. of anhydrous calcium chloride, and distil from a Claisen flask with fractionating side arm. The methylene bromide boils constantly at 96-97° and is almost colourless. 

In a 1-litre three-necked flask, fitted with a mechanical stirrer, reflux condenser and a thermometer, place 200 g. of iodoform and half of a sodium arsenite solution, prepared from 54-5 g. of A.R. arsenious oxide, 107 g. of A.R. sodium hydroxide and 520 ml. of water. Start the stirrer and heat the flask until the thermometer reads 60-65° maintain the mixture at this temperature during the whole reaction (1). Run in the remainder of the sodium arsenite solution during the course of 15 minutes, and keep the reaction mixture at 60-65° for 1 hour in order to complete the reaction. AUow to cool to about 40-45° (2) and filter with suction from the small amount of solid impurities. Separate the lower layer from the filtrate, dry it with anhydrous calcium chloride, and distil the crude methylene iodide (131 g. this crude product is satisfactory for most purposes) under diminished pressure. Practically all passes over as a light straw-coloured (sometimes brown) liquid at 80°/25 mm. it melts at 6°. Some of the colour may be removed by shaking with silver powder. The small dark residue in the flask solidifies on cooling. 

For preparations on a larger scale, a three-necked flask should be used and mechanical stirring substituted for hand shaking. 

Equip a 1-litre three-necked flask with a powerful mechanical stirrer, a separatory funnel with stem extending to the bottom of the flask, and a thermometer. Cool the flask in a mixture of ice and salt. Place a solution of 95 g. of A.R. sodium nitrite in 375 ml. of water in the flask and stir. When the temperature has fallen to 0° (or slightly below) introduce slowly from the separatory funnel a mixture of 25 ml. of water, 62 5 g. (34 ml.) of concentrated sulphuric acid and 110 g. (135 ml.) of n-amyl alcohol, which has previously been cooled to 0°. The rate of addition must be controlled so that the temperature is maintained at 1° the addition takes 45-60 minutes. AUow the mixture to stand for 1 5 hours and then filter from the precipitated sodium sulphate (1). Separate the upper yellow n-amyl nitrite layer, wash it with a solution containing 1 g. of sodium bicarbonate and 12 5 g. of sodium chloride in 50 ml. of water, and dry it with 5-7 g. of anhydrous magnesium sulphate. The resulting crude n-amyl nitrite (107 g.) is satisfactory for many purposes (2). Upon distillation, it passes over largely at 104° with negligible decomposition. The b.p. under reduced pressure is 29°/40 mm. 

Into a 500 ml. three-necked flask, provided with a mechanical stirrer, a gas inlet tube and a reflux condenser, place 57 g. of anhydrous stannous chloride (Section 11,50,11) and 200 ml. of anhydrous ether. Pass in dry hydrogen chloride gas (Section 11,48,1) until the mixture is saturated and separates into two layers the lower viscous layer consists of stannous chloride dissolved in ethereal hydrogen chloride. Set the stirrer in motion and add 19 5 g. of n-amyl cyanide (Sections III,112 and III,113) through the separatory funnel. Separation of the crystalline aldimine hydrochloride commences after a few minutes continue the stirring for 15 minutes. Filter oflF the crystalline solid, suspend it in about 50 ml. of water and heat under reflux until it is completely hydrolysed. Allow to cool and extract with ether dry the ethereal extract with anhydrous magnesium or calcium sulphate and remove the ether slowly (Fig. II, 13, 4, but with the distilling flask replaced by a Claisen flask with fractionating side arm). Finally, distil the residue and collect the n-hexaldehyde at 127-129°. The yield is 19 g. 

Vigorous mechanical stirring is preferable, particu. larly for large.scale preparations a three-necked flask should be used. Thus for a preparation on four times the above scale, the addition of 120 g. (147 ml.) of sec.-... 

Equip a 1-litre three-necked flask with a mechanical stirrer, a separatory funnel and a thermometer. Place a solution of 47 g. of sodium cyanide (or 62 g. of potassium cyanide) in 200 ml. of water in the flask, and introduce 58 g. (73-5 ml.) of pure acetone. Add slowly from the separatory fumiel, with constant stirring, 334 g. (275 ml.) of 30 per cent, sulphuric acid by weight. Do not allow the temperature to rise above 15-20° add crushed ice, if necessary, to the mixture by momentarily removing the thermometer. After all the acid has been added continue the stirring for 15 minutes. Extract the reaction mixture with three 50 ml. portions of ether, dry the ethereal extracts with anhydrous sodium or magnesium sulphate, remove most of the ether on a water bath and distil the residue rapidly under diminished pressure. The acetone cyanohydrin passes over at 80-82°/15 mm. The yield is 62 g. 

---