Thin layer chromatography - infrared

The conventional approach to solvent extraction is the batch method. Early work with this method was hampered by the low concentration of the compounds present and the relative insensitivity of the methods of characterization. Thus lipids and hydrocarbons have been separated from seawater by extraction with petroleum ether and ethyl acetate. The fractionation techniques include column and thin-layer chromatography with final characterisation by thin-layer chromatography, infrared, and ultra-violet spectroscopy and gas chromatography. Of these techniques, only gas chromatography is really useful at levels of organic matter present in seawater. With techniques available today such as glass capillary gas chromatography and mass spectrometry, much more information could be extracted from such samples [20]. 

The product is pure by vapor phase and thin-layer chromatography infrared (carbon tetrachloride) cm-1 1740 proton magnetic resonance (carbon tetrachloride) S (multiplicity, number of protons, assignment) 4.14 (broad triplet, 2, CH20), 2.30 (broad triplet, 2, CH2CO), and 1.8-1.2 (multiplet, 16). 

Cimetidine in the dry state, stored in a closed container at roan temperature showed no decomposition after five years when examined by high pressure liquid chromatography, thin layer chromatography, infrared spectrophotometry, and mass spectrometry. It is stable for at least 48 hours at 100°C. 

Examples of Identification of Additives by Combined Thin-layer Chromatography / Infrared Spectroscopy... 

METHOD 98 - DETERMINATION OF MIXTURES OF ADDITIVES IN POLYMERS. THIN-LAYER CHROMATOGRAPHY - INFRARED AND ULTRAVIOLET SPECTROSCOPY. 

Determination of mixtures of additives in polymers. Thin-layer chromatography-infrared/ultraviolet spectroscopy... 

The infrared spectra of a set of 2-thiazolylthioureas are reported in Ref. 486. The ultraviolet spectra of l-aryl-3-(2-thiazolyl)thioureas are characterized by two bands of approximate equal intensity around 282 and 332 nm (492). For l-alkyl-3-(2-thiazolyl)thioureas these bands are shifted to 255 and 291 nm, respectively (492). The shape of the spectrum is modified further when l.l -dialkyl-3-(2-thiazolyl)thioureas are considered (491). Fragmentation patterns of various 2-thiazolylthioureas have been investigated (100, 493), some of which are shown in Scheme 158. Paper and thin-layer chromatography provide an effective tool for the analysis of these heterocyclic thioureas (494. 495). 

Finally, the techniques of nmr, infrared spectroscopy, and thin-layer chromatography also can be used to assay maleic anhydride (172). The individual anhydrides may be analyzed by gas chromatography (173,174). The isomeric acids can be determined by polarography (175), thermal analysis (176), paper and thin-layer chromatographies (177), and nonaqueous titrations with an alkaU (178). Maleic and fumaric acids may be separated by both gel filtration (179) and ion-exchange techniques (180). 

The development and adaptation of procedures for the separation, isolation, purification, identification, and analysis of the components of the pyrethrum mixture have been studied and evaluated. Results of studies to determine the molar extinction coefficient of pyrethrin I as well as a gas chromatographic procedure for the determination of pyrethrins are reported. The use of chromatographic separation procedures (including partition, adsorption, gas, and thin-layer chromatography), colorimetry, and infrared spectrophotometry are discussed. 

Figures 2 through 9 are infrared spectra of fractions collected from partition columns, gas chromatography, thin-layer chromatography, or a combination of these separation techniques. Figure 10 is the infrared spectrum of a compound isolated by gas chromatography after hydrolysis of a pyrethrum concentrate. In this case the compound is a long-chain ester. All the infrared spectra were made with a Perkin-Elmer Model 221 instrument. The following operating parameters were used. A liquid demountable cell with a 0.01-mm path length was employed.

Reference substances can be used for confirmation of identity of the substance by, e.g. infrared spectrophotometry where the spectrum of the substance to be examined must be concordant with the spectrum of the GRS, or by thin layer chromatography where the migration and appearance of the spots of both the substance to be examined and the GRS are the same, or by liquid chromatography where the retention time of both the substance to be examined and the GRS are the same. 

Supercritical fluid chromatography Thin-layer chromatography Atomic absorption spectroscopy Nuclear magnetic resonance spectroscopy Mass spectrometry Fourier transform infrared spectrometry... 

Infrared spectra were obtained with a Perkin-Elmer 1800 and a Nicolet Magna-IR 750 FTIR spectrophotometer, and the absorption frequencies are reported in wave numbers (cm4). NMR spectra were obtained with BZH-300 and CA-F-300 Bruker FTNMR 300 MHz spectrometers. Chloroform-d was used as solvent, and all chemical shifts are reported in parts per million downfield (positive) of the standard. H-NMR and 13C-NMR chemical shifts are reported relative to internal tetramethylsilane, while 19F-NMR chemical shifts are reported relative to internal fluorotrichloromethane, Rf values were obtained from silica gel thin-layer chromatography developed with a mixture of 1.5 mL methylene chloride and three drops of acetone. The number of hydrate water molecules was calculated from the integration of H-NMR spectra. 

From the analytical point of view, reactions were efficiendy monitored using a combination of FTIR (Fourier transform infrared), TLC (thin-layer chromatography), and MALDI-TOF mass spectroscopy analysis of crudes resulting from the cleavage of small resin samples. 

Spectro- photometry Lumines- Infrared cence spectroscopy HPLC Super critical fluid chroma- tography GLC GLC-m/s Pyrolysis ESR GLC Thin layer chromatography... 

AHLs can be tentatively identified by comparison of the unknown with synthetic AHL standards after Thin Layer Chromatography (TLC) in which the plates are overlaid with agar containing one of the AHL biosensors described above [37,39,44,45]. However, for the unequivocal identification of AHLs the use of more powerful methods such as LC-mass spectrometry, nuclear magnetic resonance and infrared spectroscopy as described below are required. 

Schulten, H.-R., and Soldati, F. (1981). Identification of ginsenosides from Panax ginseng in fractions obtained by high-performance liquid chromatography by field desorption mass spectrometry, multiple internal reflection infrared spectroscopy and thin layer chromatography. J. Chromatogr. 212, 37-i9. 

Ibrahim, F.B., Gilbert, J.M., Evans, R.T., and Cavagnol, J.C. Decomposition of disyston (0,0-diethyl 5-[2-(ethylthio)ethyl] phosphorodithioate) on fertilizers by infrared, gas-liquid chromatography, and thin-layer chromatography. J. Agric. Food Chem., 17(2) 300-305, 1969. 

The relative amounts of the products depend on irradiation time, and the formation of the bis (triphenyl phosphite) chromium complex may be almost completely avoided by following the reaction with thin layer chromatography. The diastereoisomers are air stable and reasonably soluble in most organic solvents. Their infrared spectra exhibit a metal carbonyl band at 1925 cm 1 (i>co ester at 1729 cm"1) and a metal thiocarbonyl band at 1925 cm"1 (CH2C12 solution). The NMR spectra. I 5ch3 at 1.87 ppm 5co3CH3 at 3.77 ppm II 6ch3 at 1.77... 

---