Thermal properties ionic liquids

From the very limited literature describing ED of compound semiconductors from ionic liquids it can be seen that more research is needed to understand the fundamental aspects of ED from these Uquids. However it is reasonable to conclude that due to their unique electrochemical and thermal properties, ionic liquids are likely to play an important role in the field of compound semiconductor electrodeposition. Ongoing work in our laboratories is investigating controlled gaUium incorporation and high-temperature electrodeposition of GIGS thin films from ionic liquids. 

The following discussion concerns the thermal liquidus ranges available in different ionic liquids, as functions of cation and anion structure and composition. In particular, those structural features of cation and anion that promote these properties (while providing other desirable, and sometimes conflicting characteristics of the liquid, such as low viscosity, chemical stability, etc.) and variations in liquidus ranges and stabilities are the focus of this chapter. 

A wide variety of physical properties are important in the evaluation of ionic liquids (ILs) for potential use in industrial processes. These include pure component properties such as density, isothermal compressibility, volume expansivity, viscosity, heat capacity, and thermal conductivity. However, a wide variety of mixture properties are also important, the most vital of these being the phase behavior of ionic liquids with other compounds. Knowledge of the phase behavior of ionic liquids with gases, liquids, and solids is necessary to assess the feasibility of their use for reactions, separations, and materials processing. Even from the limited data currently available, it is clear that the cation, the substituents on the cation, and the anion can be chosen to enhance or suppress the solubility of ionic liquids in other compounds and the solubility of other compounds in the ionic liquids. For instance, an increase in allcyl chain length decreases the mutual solubility with water, but some anions ([BFJ , for example) can increase mutual solubility with water (compared to [PFg] , for instance) [1-3]. While many mixture properties and many types of phase behavior are important, we focus here on the solubility of gases in room temperature IFs. 

Notwithstanding their very low vapor pressure, their good thermal stability (for thermal decomposition temperatures of several ionic liquids, see [11, 12]) and their wide operating range, the key property of ionic liquids is the potential to tune their physical and chemical properties by variation of the nature of the anions and cations. An illustration of their versatility is given by their exceptional solubility characteristics, which make them good candidates for multiphasic reactions (see Section 5.3.4). Their miscibility with water, for example, depends not only on the hydrophobicity of the cation, but also on the nature of the anion and on the temperature. 

Recently, room temperature ionic liquids (RT-ILs) have attracted much attention for their excellent properties, e.g., wide temperature range of liquid phase, ultra-low vapor pressure, chemical stability, potential as green solvents, and high heat capacities [64,65]. These properties make them good candidates for the use in many fields, such as thermal storage [66], electrochemical applications, homogeneous catalysis [67], dye sensitized solar cells [68], and lubricants [69,70]. 

In a number of general properties, such as viscosity and thermal conductivity, melts differ little from solutions. Their surface tensions are two to three times higher than those of aqueous solutions. This leads to poorer wetting of many solids, including important electrode materials such as carbon and graphite, by the ionic liquids. 

Significant progress has been made in the application of ionic liquids (ILs) as alternative solvents to C02 capture because of their unique properties such as very low vapour pressure, a broad range of liquid temperatures, excellent thermal and chemical stabilities and selective dissolution of certain organic and inorganic materials. ILs are liquid organic salts at ambient conditions with a cationic part and an anionic part. 

Ionic liquids are characterised by the following three definition criteria. They consist entirely out of ions, they have melting points below 100 °C and they exhibit no detectable vapour pressure below the temperature of their thermal decomposition. As a consequence of these properties most ions forming ionic liquids display low charge densities resulting in low intermolecular interaction. Figure 7.1 displays some of the most common ions used so far for the formation of ionic liquids. 

There are many good reasons for applying ionic liquids as alternative solvents in transition metal catalysed reactions. Besides their very low vapour pressure and then-good thermal stability [33], an important advantage is the possibility of tuning then-solubility [34] and acidity/coordination properties [35] by varying the nature of the anions and cations systematically. 

So far, we have focused on the melting points and polarities of ionic liquids. Like conventional solvents, other properties such as viscosity and density are also very important when selecting a solvent for synthetic applications. Whilst this type of data is well known for other solvents, relatively little has been reported for ionic liquids. Table 4.6 lists available melting points, thermal stability, density, viscosity and conductivity data for the better studied ionic liquids. 

Ionic liquids have much higher heat capacities and thermal conductivities than most organic solvents. These properties facilitate heat transfer for many chemical reactions. 

Heretofore, ionic liquids incorporating the 1,3-dialkylimidazolium cation have been preferred as they interact weakly with the anions and are more thermally stable than the quaternary ammonium cations. Recently, the physical properties of 1,2,3,4-tetraalkylimidazolium- and 1,3-dialkylimidazolium-containing ionic liquids in combination with various hydrophobic and hydrophilic anions have been systematically investigated (36,41). The melting point, thermal stability, density, viscosity, and other physical properties have been correlated with alkyl chain length of the imidazolium cation and the nature of the anion. The anion mainly determines water miscibility and has the most dramatic effect on the properties. An increase in the alkyl chain length of the cations from butyl to octyl, for example, increases the hydrophobicity and viscosity of the ionic liquid, whereas densities and surface tension values decrease, as expected. 

An ionic liquid can be used as a pure solvent or as a co-solvent. An enzyme-ionic liquid system can be operated in a single phase or in multiple phases. Although most research has focused on enzymatic catalysis in ionic liquids, application to whole cell systems has also been reported (272). Besides searches for an alternative non-volatile and polar media with reduced water and orgamc solvents for biocatalysis, significant attention has been paid to the dispersion of enzymes and microorganisms in ionic liquids so that repeated use of the expensive biocatalysts can be realized. Another incentive for biocatalysis in ionic liquid media is to take advantage of the tunability of the solvent properties of the ionic liquids to achieve improved catalytic performance. Because biocatalysts are applied predominantly at lower temperatures (occasionally exceeding 100°C), thermal stability limitations of ionic liquids are typically not a concern. Instead, the solvent properties are most critical to the performance of biocatalysts. 

In addition to their use as solvents, surfactants, and biocides, ionic liquids are attractive for use in catalytic reactions due to their ability to activate reactant molecules, the ease of separation from final products, thermal stability, solubility of gaseous reactants, among other properties. Amit Gujar and Mark White (Mississippi State Univ., USA) show, for example,... 

Pina, F. et al.. Thermal and photochemical properties of 4, 7-dihydroxyflavylium in water-ionic liquid biphasic systems a write-read-erase molecular switch, Angew. Chem. Int. Ed., 43,1525,2004. 

---