Thermal properties expansion

Aesthetic properties are of greatest concern in decorative laminates. These include gloss, appearance, cleanabiUty, wear resistance, stain resistance, and other surface properties. Physical properties are of most importance for industrial laminates. These include strength, electrical and thermal properties, expansion coefficient, and punchabiUty. The definitions of the laminate grades in these standards foUow. 

Thermal properties Expansivity, heat capaoity, thermal conductivity melting point... 

Material Properties. The properties of materials are ultimately deterrnined by the physics of their microstmcture. For engineering appHcations, however, materials are characterized by various macroscopic physical and mechanical properties. Among the former, the thermal properties of materials, including melting temperature, thermal conductivity, specific heat, and coefficient of thermal expansion, are particularly important in welding. 

Thermal Properties. Many commercial glass-ceramics have capitalized on thek superior thermal properties, particularly low or zero thermal expansion coupled with high thermal stabiUty and thermal shock resistance properties that are not readily achievable in glasses or ceramics. Linear thermal expansion coefficients ranging from —60 to 200 x 10 j° C can be obtained. Near-zero expansion materials are used in apphcations such as telescope mirror blanks, cookware, and stove cooktops, while high expansion frits are used for sealing metals. 

Fig. 1. Thermal properties of high temperature materials (a), expansion coefficient (b), thermal conductivity (1). Mar-M-247 has an Ni base Mar-M-509, a...

Mechanical Properties and Structural Performance. As a result of the manufacturing process, some cellular plastics have an elongated cell shape and thus exhibit anisotropy in mechanical, thermal, and expansion properties (35,36). Efforts are underway to develop manufacturing techniques that reduce such anisotropy and its effects. In general, higher strengths occur for the paraHel-to-rise direction than in the perpendicular-to-rise orientation. Properties of these materials show variabiUty due to specimen form and position in the bulk material and to uncertainty in the axes with respect to direction of foam rise. Expanded and molded bead products exhibit Httie anisotropy. 

Thermal Properties. Refractories, like most other soHds, expand upon heating, but much less than most metals. The degree of expansion depends on the chemical composition. A diagram of the thermal expansion of the most common refractories is shown in Figure 1. 

T and are the glass-transition temperatures in K of the homopolymers and are the weight fractions of the comonomers (49). Because the glass-transition temperature is directly related to many other material properties, changes in T by copolymerization cause changes in other properties too. Polymer properties that depend on the glass-transition temperature include physical state, rate of thermal expansion, thermal properties, torsional modulus, refractive index, dissipation factor, brittle impact resistance, flow and heat distortion properties, and minimum film-forming temperature of polymer latex... 

Thermal Properties. Thermal properties include heat-deflection temperature (HDT), specific heat, continuous use temperature, thermal conductivity, coefficient of thermal expansion, and flammability ratings. Heat-deflection temperature is a measure of the minimum temperature that results in a specified deformation of a plastic beam under loads of 1.82 or 0.46 N/mm (264 or 67 psi, respectively). Eor an unreinforced plastic, this is typically ca 20°C below the glass-transition temperature, T, at which the molecular mobility is altered. Sometimes confused with HDT is the UL Thermal Index, which Underwriters Laboratories estabflshed as a safe continuous operation temperature for apparatus made of plastics (37). Typically, UL temperature indexes are significantly lower than HDTs. Specific heat and thermal conductivity relate to insulating properties. The coefficient of thermal expansion is an important component of mold shrinkage and must be considered when designing composite stmctures. 

Thermal Properties at Low Temperatures For sohds, the Debye model developed with the aid of statistical mechanics and quantum theoiy gives a satisfactoiy representation of the specific heat with temperature. Procedures for calculating values of d, ihe Debye characteristic temperature, using either elastic constants, the compressibility, the melting point, or the temperature dependence of the expansion coefficient are outlined by Barron (Cryogenic Systems, 2d ed., Oxford University Press, 1985, pp 24-29). 

There are, of course, many more ceramics available than those listed here alumina is available in many densities, silicon carbide in many qualities. As before, the structure-insensitive properties (density, modulus and melting point) depend little on quality -they do not vary by more than 10%. But the structure-sensitive properties (fracture toughness, modulus of rupture and some thermal properties including expansion) are much more variable. For these, it is essential to consult manufacturers data sheets or conduct your own tests. 

The resin is too brittle to give a tme meaning to mechanical properties. The thermal properties are interesting in that there appears to be a transition point at 46°C. Above this temperature, specific heat and temperature coefficient of expansion are much greater than below it. The specific heat of hardened shellac at 50°C is lower than that of unhardened material, this no doubt reflecting the disappearance, or at least the elevation, of the transition temperature. 

The other principal thermal properties of plastics which are relevant to design are thermal conductivity and coefficient of thermal expansion. Compared with most materials, plastics offer very low values of thermal conductivity, particularly if they are foamed. Fig. 1.10 shows comparisons between the thermal conductivity of a selection of metals, plastics and building materials. In contrast to their low conductivity, plastics have high coefficients of expansion when compared with metals. This is illustrated in Fig. 1.11 and Table 1.8 gives fuller information on the thermal properties of pl tics and metals. 

In order to simplify the procedure of evaluating the extent of mesophase and its mechanical and thermal properties, a simple but effective three-layer model may be used, which is based on measurements of the thermal expansions of the phases and the composite, below and above the transition zone of the composite, lying around its glass transition temperature Tgc. 

Relation (18) correlates Tgc with the thermal properties of matrix and mesophase. Obviously, more accurate expressions for the thermal expansion curves, or the thermal expansion coefficient of the composite may provide a better approach to Tgc than the above formula. However, in many cases, it was found that this relation applies with satisfactory accuracy. 

Thermal properties such as thermal capacity, thermal expansion, melting temperature, thermal decomposition and sublimation are all important in considering processes to which minerals may be directly subjected in a pyro way. As for example, roasting or calcination or any pyro pre-treatment of a mineral concentrate is greatly influenced by its thermal properties. The chapter on pyrometallurgy deals with these aspects. 

The principal thermal properties of importance in the present context are specific heat, thermal conductivity, coefficient of expansion and stability. 

From these examples, it is clear that the amplitude of the thermal motion transverse to the bonds will affect the thermal properties of the solid, but in ways that depend on details of the particular structure. It is therefore impossible to provide a universal model for the effects of the transverse thermal motion, the combinations of thermal expansion and thermal contraction must be considered individually for each structure. For most materials the combination results in a net thermal expansion, but there are a few compounds that show a net thermal contraction in one or more directions (Evans 1999). 

For materials generally, change in expansion (or density) by dilatometry was traditionally the most often used method for measuring Tg. Thermal properties, for example specific heat, are also widely used, particularly the methods of differential thermal analysis". A method for rubbers using DSC is being developed in ISO TC 45 as ISO 22768, but is not yet published. The inflection point on the heat input - temperature curve is usually obtained automatically by the analyser s software but, if obtained manually, is best found from the derivative of the curve. 

---