Thallium , exchange

G. V. Tsitsishvili (Academy of Sciences of the Georgian SSR, Tbilisi, USSR) Interesting results are presented in the paper about sodium ion replacement by thallium ions. You observed that total replacement of Na+ by Tl+ in NaY proceeds at 100 °C. Did you study the temperature dependence of this ion exchange process If the 6-membered rings in zeolite Y are only about 0.01A smaller in diameter than those of zeolite X, can one expect the strong temperature dependence of the sodium—thallium exchange process ... 

The reason for the effectiveness of triphenylphosphine is at present uncertain, although its eventual isolation as triphenylphosphine oxide indicates that it may well function as a scavenger for the thallium(III) released in the metal-metal exchange reaction. 

Monoalkylthallium(III) compounds are unstable (73, 79), and very few examples of this class have been isolated. A number of alkylthallium diacetates have been obtained either from oxythallation of olefins with thallium-(III) acetate (see below) or from exchange reactions such as that shown in Eq. (11) (74, 75). Only four alkylthallium dihalides have been isolated so far, namely a neopentylthallium dihalide (60) [Eq. (12)] and the isomeric 2-, 3-, and 4-pyridiomethylthallium dichlorides (20) [Eq. (13)]. Monoaryl-and monovinylthallium(III) derivatives are considerably more stable than... 

Yields in the above reactions can often be improved by the addition of 1 mole of triphenylphosphine directly to the trifluoroacetic acid solution of the reactants immediately before final work-up. It would appear that the triphenylphosphine functions as a scavenger for TTFA released in the metal-metal exchange reaction, thus protecting the final phenol from further electrophilic thallation and/or oxidation. Validation of the metal-metal exchange mechanism was obtained indirectly by isolation and characterization of an ArTlX2/LTTFA complex directly from the reaction mixture. NMR analysis revealed that this complex still possessed an intact aryl-thallium bond, indicating that it was probably the precursor to the transmetallation products, an aryllead tristrifluoroacetate and TTFA. 

The utility of thallium(III) salts as oxidants for nonaromatic unsaturated systems is a consequence of the thermal and solvolytic instability of mono-alkylthallium(III) compounds, which in turn is apparently dependent on two major factors, namely, the nature of the associated anion and the structure of the alkyl group. Compounds in which the anion is a good bidentate ligand are moderately stable, for example, alkylthallium dicar-boxylates 74, 75) or bis dithiocarbamates (76). Alkylthallium dihalides, on the other hand, are extremely unstable and generally decompose instantly. Methylthallium diacetate, for example, can readily be prepared by the exchange reaction shown in Eq. (11) it is reasonably stable in the solid state, but decomposes slowly in solution and rapidly on being heated [Eq. (23)]. Treatment with chloride ion results in the immediate formation of methyl chloride and thallium(I) chloride [Eq. (24)] (55). These facts can be accommodated on the basis that the dicarboxylates are dimeric while the... 

Oxidation of the steroidal olefin (XXVII) with thallium(III) acetate gives mainly the allylic acetates (XXXI)-(XXXIII) (Scheme 15), again indicating that trans oxythallation is the preferred reaction course (19). Addition of the electrophile takes place from the less-hindered a-side of the molecule to give the thallinium ion (XXVIII), which by loss of a proton from C-4 would give the alkylthallium diacetate (XXIX). Decomposition of this intermediate by a Type 5 process is probably favorable, as it leads to the resonance-stabilized allylic carbonium ion (XXX), from which the observed products can be derived. Evidence in support of the decomposition process shown in Scheme 15 has been obtained from a study of the exchange reaction between frawr-crotylmercuric acetate and thallium(III) acetate in acetic acid (Scheme 16) (142). 

In the crystal, most trinuclear carbeniate complexes are known to be stacked with close aurophilic interactions, and organic 7r-acids can be intercalated into these stacks.252 Similar intercalation takes place with the cations of simple silver and thallium(i) salts. The cations become attached to form polymetallic core units through metallophilic bonding. With the trinuclear silver pyrazolates, both metal and ligand exchange have been observed to give new stacks of trinuclear units.254... 

The B oH o2 anion is best obtained by heating [Et3NH]2[BioHi2] to 160 °C. Its alkali metal salts are soluble in water, while the thallium salt is insoluble. The white alkali metal salts are stable up to 500 °C. Their aqueous solutions react neutral because the corresponding acid is a strong acid. It can be isolated as [H30]2[B1oH1o] (m.p. 202 °C) from its aqueous solutions obtained by ion exchange from the alkali metal salts. 

The layer-type structures and chemical nature of the constituents of the bismuth and thallium-based cuprate superconductors - notably the lone-pair stereochemistry of Bis+, variable valence of copper, and considerable exchange among some of the cation sites - combine to make structural non-ideality, nonstoichiometry, and phase intergrowth the rule rather that the exception in these families of materials. These features, as well as the probable metastability of the phases (and possibly all high-temperature oxide superconductors), also contribute to the difficulties typically encountered in preparing single-phase samples with reproducible properties and compositions. 

Reaction of the anion 21 with Cp or Cp metal fragments provides further metallocene-type complexes with a pendant phosphaferrocene side-chain. For example, the reaction of the thallium derivative T1 21 with [Cp RhCl2]2 yields the cationic pentamethylrhodocenium 24 as its chloride (Scheme 1.5.10). This is an interesting species because it is a chiral water-soluble P ligand. The chloride anion can be exchanged by PF,s to make the compound more soluble in organic solvents. 

Rapid exchange of alkyl groups occurs in thallium(III) alkyls as demonstrated by the proton NMR study of Maher and Evans (81). At low temperatures ( —85°) the multiplet structure expected for proton-thallium coupling is superimposed on the proton spectra of thallium alkyls. On warming, the multiplets collapse. Analysis of this collapse region [Eq. (29)] yielded a value of 6 1 kcal mole-1 for the exchange-activation energy... 

The iodo acetal could be easily obtained (as a mixture of E and Z isomers, 40/60), by a nickel catalyzed iodine-bromine exchange. This synthon reacted smoothly with the C15 tertiary allylic alcohol in the presence of a catalytic amount of palladium acetate and a stoechiometric amount of either a silver or a thallium salt. The C20 hydroxy-acetal was obtained in 38% yield, as a mixture of E and Z isomers (48/52). Finally retinal was obtained by treatment with dilute HBr in refluxing acetone, as a mixture of E and Z isomers (C(9)=C(io) and C(i3)=C(i4)), Fig. (32). 

The structure of and possible cation location in these materials is fairly well known (2, 8, 4, )> and their ion-exchange behavior toward a multitude of pairs of ions, mostly including sodium, has been measured and interpreted in terms of basic properties of ions, crystal structures, and pore dimensions. The major part of these studies is with alkali- and alkaline-earth cations, alkylammonium ions, rare-earth cations, and silver and thallium ions (1). In contrast, the ion adsorption of transition metals in faujasite has received little attention. 

The heterocycles react directly with alkali metals or undergo exchange reactions with, for example, sodium amide and hydride, n-butyllithium and thallium ethoxide, to form the TV-heteroaryl salts. The salts of the alkali metals exist as solvent separated ion-pairs or as contact ion-pairs (71JOC3091), as do the quaternary ammonium salts, whereas the salts of the heavier metals are generally considered to have a high N—metal covalent character. These characteristics, which can be modified by a change in the polarity of the solvent, control the reactions of the heteroaryl anions. 

Lithiation of dibenzofuran with butyllithium and mercuration both occur at the 4-position. Thallation occurs at the 2-position, however (57IZV1391). The mercury and thallium derivatives serve as a source of the iodo compounds by reaction with iodine. Bromodibenzofurans undergo bromine/lithium exchange with butyllithium and the derived lithio compounds may be converted into phenols by reaction with molecular oxygen in the presence of a Grignard reagent, into amines by reaction with O-methylhydroxylamine, into sulfinic acids by reaction with sulfur dioxide, into carboxylic acids by reaction with carbon dioxide and into methyl derivatives by reaction with methyl sulfate (Scheme 100). This last reaction... 

ST1 is a very favorable nucleus for solid-state NMR studies it has f = 2, high natural abundance and high sensitivity. Its large chemical shift range makes it possible to observe individual environments of the nucleus. Thallium can be easily introduced into zeolites by cation exchange. 

A number of reactivity studies have been performed on 6 and 8 and indicate a strongly polar (if not ionic) Mn—E bond Mn "—E,+ (E = In, Tl). Thus heterolytic bond dissociation occurs in polar ligating solvents such as MeCN or DMF, and halogens, hydrogen halides, and alkyl halides readily add across the metal-metal bond in a manner consistent with the polarity described above (13,13a,18). In the thallium example, however, the reactions are generally more complicated and result in T1(I) salts [e.g., Eq. (3)], and metal exchange reactions are also more facile, e.g., the synthesis of 6 from 8 and indium metal. In general, therefore, the chemistry of 6 and 8 is consistent with predominantly ionic behavior. 

Fig. 1. Simultaneous separation and detection of anions and cations on a latex agglomerate column. Column Dionex HPIC-CS5 cation exchange column (250X2 mm) with precolumn HPIC-CG5 (50 X 4 mm) eluent 0.5 mM copper sulfate, pH 5. 62 flow rate 0.5 ml/min sample volume 20 gl containing 0.1 m M of each ion detection two potentiomet-ric detectors equipped with different ion-selective electrodes in series. Peaks (1) chloroacetate, (2) chloride, (3) nitrite, (4) benzoate, (5) cyanate, (6) bromide, (7) nitrate, (8) sodium, (9) ammonium, (10) potassium, (11) rubidium, (12) cesium, (13) thallium. Reprinted with permission from [10].

---