Synthetic polymers chemical properties

A polymer is a macromolecule that is constructed by chemically linking together a sequent of molecular fragments. In simple synthetic polymers such as polyethylene or polystyrer all of the molecular fragments comprise the same basic unit (or monomer). Other poly me contain mixtures of monomers. Proteins, for example, are polypeptide chains in which eac unit is one of the twenty amino acids. Cross-linking between different chains gives rise to j-further variations in the constitution and structure of a polymer. All of these features me affect the overall properties of the molecule, sometimes in a dramatic way. Moreover, or... 

Vinylidene chloride copolymers were among the first synthetic polymers to be commercialized. Their most valuable property is low permeabiUty to a wide range of gases and vapors. From the beginning in 1939, the word Saran has been used for polymers with high vinylidene chloride content, and it is still a trademark of The Dow Chemical Company in some countries. Sometimes Saran and poly (vinylidene chloride) are used interchangeably in the Hterature. This can lead to confusion because, although Saran includes the homopolymer, only copolymers have commercial importance. The homopolymer, ie, poly (vinylidene chloride), is not commonly used because it is difficult to fabricate. 

This article discusses traditional hull ding and construction products, ie, not made from synthetic polymers (see Building materials, plastic), including wood, asphalt, gypsum, glass products, Pordand cement, and bricks. The article presents information about each basic material, the products made from it, the basic processes by which the products or materials are produced, estimates of the quantity or doUar value of the quantities produced or used in the United States, and some pertinent chemical or physical properties related to the material. More detailed chemical and physical property data can be found in articles devoted to the individual materials (see Asphalt Cement Glass Wood). 

Acrylic Resins. The first synthetic polymer denture material, used throughout much of the 20th century, was based on the discovery of vulcanised mbber in 1839. Other polymers explored for denture and other dental uses have included ceUuloid, phenolformaldehyde resins, and vinyl chloride copolymers. Polystyrene, polycarbonates, polyurethanes, and acryHc resins have also been used for dental polymers. Because of the unique combination of properties, eg, aesthetics and ease of fabrication, acryHc resins based on methyl methacrylate and its polymer and/or copolymers have received the most attention since their introduction in 1937. However, deficiencies include excessive polymerization shrinkage and poor abrasion resistance. Polymers used in dental appHcation should have minimal dimensional changes during and subsequent to polymerization exceUent chemical, physical, and color stabiHty processabiHty and biocompatibiHty and the abiHty to blend with contiguous tissues. 

Grafting reactions alter the physical and mechanical properties of the polymer used as a substrate. Grafting differs from normal chemical modification (e.g., functionalization of polymers) in the possibility of tailoring material properties to a specific end use. For example, cellulose derivatization improves various properties of the original cellulose, but these derivatives cannot compete with many of the petrochemically derived synthetic polymers. Thus, in order to provide a better market position for cellulose derivatives, there is little doubt that further chemical modification is required. Accordingly, grafting of vinyl monomers onto cellulose or cellulose derivatives may improve the intrinsic properties of these polymers. 

When polymerizing dienes for synthetic rubber production, coordination catalysts are used to direct the reaction to yield predominantly 1,4-addition polymers. Chapter 11 discusses addition polymerization. The following reviews some of the physical and chemical properties of butadiene and isoprene. 

The application of NMR spectroscopy to tacticity determination of synthetic polymers was pioneered by Bovey and Tiers.9 NMR spectroscopy is the most used method and often the only technique available for directly assessing tacticity of polymer chains. "2 7 8 0JI The chemical shift of a given nucleus in or attached to the chain may be sensitive to the configuration of centers three or more monomer units removed. Other forms of spectroscopy (e.g. TR spectroscopy l2 lJ) are useful with some polymers and various physical properties (e.g. the Kerr effect14) may also be correlated with tacticity. 

The overall objective of this chapter is to review the fundamental issues involved in the transport of macromolecules in hydrophilic media made of synthetic or naturally occurring uncharged polymers with nanometer-scale pore structure when an electric field is applied. The physical and chemical properties and structural features of hydrophilic polymeric materials will be considered first. Although the emphasis will be on classical polymeric gels, discussion of polymeric solutions and nonclassical gels made of, for example, un-cross-linked macromolecular units such as linear polymers and micelles will also be considered in light of recent interest in these materials for a number of applications... 

Hydrogen sulphide occurs naturally, e.g. in natural gas and petroleum, volcanic gases, and from decaying organic matter. It may be present near oil wells and where petroleum is processed. Commercially it is obtained as a by-product from many chemical reactions including off-gas in the production of some synthetic polymers (e.g. rayon, nylon) from petroleum products, and by the action of dilute mineral acids on metal sulphides. Physical properties are summarized in Table 9.14 and effects of temperature on vapour pressure are shown in Figure 9.5. 

Polyvinyl alcohol (PVA), which is a water soluble polyhidroxy polymer, is one of the widely used synthetic polymers for a variety of medical applications [197] because of easy preparation, excellent chemical resistance, and physical properties. [198] But it has poor stability in water because of its highly hydrophilic character. Therefore, to overcome this problem PVA should be insolubilized by copolymerization [43], grafting [199], crosslinking [200], and blending [201], These processes may lead a decrease in the hydrophilic character of PVA. Because of this reason these processes should be carried out in the presence of hydrophilic polymers. Polyfyinyl pyrrolidone), PVP, is one of the hydrophilic, biocompatible polymer and it is used in many biomedical applications [202] and separation processes to increase the hydrophilic character of the blended polymeric materials [203,204], An important factor in the development of new materials based on polymeric blends is the miscibility between the polymers in the mixture, because the degree of miscibility is directly related to the final properties of polymeric blends [205],... 

The Pd-catalyzed C-C coupling (Sonogashira coupling) was applied to polymer synthesis about 20 years ago [23-25], and has especially been developed for the synthesis of n-conjugated poly(aryleneethynylene)s (PAEs) (for reviews, see refs. [16,26-33]). Recently other synthetic routes for PAEs were also developed, e.g., the alkyne metathesis method [28, 34] and the coupling reaction of =C-MR3 with R X (M=Si [35, 36] or Sn [37, 38]). In this review, we are concerned with the synthesis and chemical properties of PAEs with heteroaromatic rings. 

Pentaerythritol tetranitrate (PETN) (3) is a powerful explosive which exhibits considerable brisance on detonation (VOD 8310 m/s at = 1.77 g/cm ). It is the most stable and least reactive of the common nitrate ester explosives. The relatively high sensitivity of PETN to friction and impact means that it is usually desensitized with phlegmatizers like wax and the product is used in detonation cord, boosters and as a base charge in detonators. Pentaerythritol tetranitrate can be mixed with synthetic polymers to form plastic bonded explosives (PBXs) like detasheet and Semtex-IA. A cast mixture of PETN and TNT in equal proportions is known as pentolite and has seen wide use as a military explosive and in booster charges. The physical, chemical and explosive properties of PETN commend its use as a high explosive. 

---