Surface of grafted

Monomer compositional drifts may also occur due to preferential solution of the styrene in the mbber phase or solution of the acrylonitrile in the aqueous phase (72). In emulsion systems, mbber particle size may also influence graft stmcture so that the number of graft chains per unit of mbber particle surface area tends to remain constant (73). Factors affecting the distribution (eg, core-sheU vs "wart-like" morphologies) of the grafted copolymer on the mbber particle surface have been studied in emulsion systems (74). Effects due to preferential solvation of the initiator by the polybutadiene have been described (75,76). 

Decabromodiphenyl Oxide—Polyacrylate Finishes. An alternative to the diffusion technique is the appHcation of decabromodiphenyl oxide on the surface of fabrics in conjunction with binders (131). Experimental finishes using graft polymerization, in situ polymerization of phosphoms-containing vinyl monomers, or surface halogenation of the fibers also have been reported (129,130,132,133). 

Adsorption and Surface Chemical Grafting. As with siHca and many other siHcate minerals, the surface of asbestos fibers exhibit a significant chemical reactivity. In particular, the highly polar surface of chrysotile fibers promotes adsorption (physi- or chemisorption) of various types of organic or inorganic substances (22). Moreover, specific chemical reactions can be performed with the surface functional groups (OH groups from bmcite or exposed siHca). 

In the absence of dyes, APA- and AdPA-grafted silica bind La(III) with, respectively, 0.20 and 0.27 mmol/g sorption capacity, resulting in formation of 1 2 (La L) complexes. 50% of introduced cation is bonded at pH=5 (APA), pH=6.1 (AdPA) and complete adsorption occurs at pH=6 (APA), pH=6.5 (AdPA). The grafted support in absence of La adsorbs the chosen dyes at pH<4 due to the electrostatic interaction with the -NH, groups on the surface, present as a result of grafting procedure. The adsorption of dyes at pH>4 is insignificant. 

Effective metal ion adsorbent has been prepai ed by the immobilization of propylthioethyleamine ligand onto the surface of silica gel (SN-SiO,).The effectiveness of this material to bind metal ions has been attributed to the complexation chemistry between the ligand and the metal. We are investigating properties of propylthioethyleamine grafted on the surface of silica and possibility of application of the obtained surface for preconcentration of heavy metals such as zinc, lead, cadmium, copper, etc. from water solutions. 

She et al. [128] used rolling contact to estimate the adhesion hysteresis at polymer/oxide interfaces. By plasma oxidation of the cylinders of crosslinked PDMS, silica-like surfaces were generated which could hydrogen bond to PDMS r olecules. In contrast to unmodified surfaces, the adhesion hysteresis was shown to be larger and proportional to the molecular weight of grafted polymer on the substrate. The observed hysteresis was interpreted in terms of the orientation and relaxation of polymer chains known as Lake-Thomas effect. 

This prediction is drawn according to the following model. Figure 5 illustrates that in the latex state the grafting PVA protects hydrophobic PVAc particles in water by concentrating on the surfaces of PVAc particles, but in the porous film after acetone extraction, the insoluble grafting PVAc conversely exists as an important component on the inner surface of spherical cells of PVA. 

Paine et al. [99] tried different stabilizers [i.e., hydroxy propylcellulose, poly(N-vinylpyrollidone), and poly(acrylic acid)] in the dispersion polymerization of styrene initiated with AIBN in the ethanol medium. The direct observation of the stained thin sections of the particles by transmission electron microscopy showed the existence of stabilizer layer in 10-20 nm thickness on the surface of the polystyrene particles. When the polystyrene latexes were dissolved in dioxane and precipitated with methanol, new latex particles with a similar surface stabilizer morphology were obtained. These results supported the grafting mechanism of stabilization during dispersion polymerization of styrene in polar solvents. 

Qiu et al. [241 have reported the synthesis of macromolecules having 4-tolylureido pendant groups, such as poly(N-acryloyl-N -4-tolylurea-cvi ethyl acrylate) [po-ly(ATU-co-EA)] 18, and poly(N-methacryloyl-A/ -4-tol-ylurea-co-EA) [poly(MTU-co-EA)] 19, from the copolymerization of ATU and MTU with EA, respectively. Graft copolymerization of acrylamide onto the surface of these two copolymer films took place using the Ce(lV) ion as initiator. The graft copolymerization is proposed as Scheme (12). 

---