Surface unmodified

The in vivo disposition of emulsions administered as nutrients (surface-unmodified first-generation emulsion) as well as administered as drug carriers (surface-modified second-generation emulsion) would depend on the particle prop-... 

The effects of the surface modification of p-CaSi03 on the electrospun poly(butylene sucdnate)/p-CaSi03 composite fibers were investigated (Zhang and Chang 2009). Dodecyl alcohol can be esterified on the surface of p-CaSiOj to modify the bioceramics and prepare the composite fibrous materials with improved properties. Therefore, PBSU/p-CaSiOj composite nanofiber membranes were fabricated by incorporating the surface-modified and surface-unmodified p-CaSiOj into the polymer matrix. 

Fig. 13 Components for the smart silica-rubber nanocomposites, (a) surface unmodified silica (Si-OH), (b) surface-modified silica (Si-Ph), (c) thermoreversible crosslinkmg rubber (Reprinted from [52])...

Surface properties of contact surfaces unmodified in its essential performance properties. 

The strength of dispersion interaction of a solid with a gas molecule is determined not only by the chemical composition of the surface of the solid, but also by the surface density of the force centres. If therefore this surface density can be sufficiently reduced by the pre-adsorption of a suitable substance, the isotherm may be converted from Type II to Type III. An example is rutile, modified by the pre-adsorption of a monolayer of ethanol the isotherm of pentane, which is of Type II on the unmodified rutile (Fig. 5.3, curve A), changes to Type III on the treated sample (cf. Fig. 5.3 curve B). Similar results were found with hexane-l-ol as pre-adsorbate. Another example is the pre-adsorption of amyl alcohol on a quartz powder... 

Fig. 53 Adsorption of pentane vap>our at 273 K on a sample of nonporous rutile before and after modification of the surface by pre-adsorption of ethanol. Curve (A), unmodified surface curve (B), surface containing 52 pmol of ethanol. (After Parfitt.)...

Chain-Growth Associative Thickeners. Preparation of hydrophobically modified, water-soluble polymer in aqueous media by a chain-growth mechanism presents a unique challenge in that the hydrophobically modified monomers are surface active and form micelles (50). Although the initiation and propagation occurs primarily in the aqueous phase, when the propagating radical enters the micelle the hydrophobically modified monomers then polymerize in blocks. In addition, the hydrophobically modified monomer possesses a different reactivity ratio (42) than the unmodified monomer, and the composition of the polymer chain therefore varies considerably with conversion (57). The most extensively studied monomer of this class has been acrylamide, but there have been others such as the modification of PVAlc. Pyridine (58) was one of the first chain-growth polymers to be hydrophobically modified. This modification is a post-polymerization alkylation reaction and produces a random distribution of hydrophobic units. 

Adhesives for paper tubes, paperboard, cormgated paperboard, and laminated fiber board are made from dispersions of clays suspended with fully hydrolyzed poly(vinyl alcohol). Addition of boric acid improves wet tack and reduces penetration into porous surfaces (312,313). The tackified grades have higher solution viscosity than unmodified PVA and must be maintained at pH 4.6—4.9 for optimum wet adhesion. 

For a number of purposes the unmodified epoxide resins may be considered to have certain disadvantages. These disadvantages include high viscosity, high cost and too great a rigidity for specific applications. The resins are therefore often modified by incorporation of diluents, fillers, and flexibilisers and sometimes, particularly for surface coating applications, blended with other resins. 

She et al. [128] used rolling contact to estimate the adhesion hysteresis at polymer/oxide interfaces. By plasma oxidation of the cylinders of crosslinked PDMS, silica-like surfaces were generated which could hydrogen bond to PDMS r olecules. In contrast to unmodified surfaces, the adhesion hysteresis was shown to be larger and proportional to the molecular weight of grafted polymer on the substrate. The observed hysteresis was interpreted in terms of the orientation and relaxation of polymer chains known as Lake-Thomas effect. 

Zorbax PSM packings are produced in three forms unmodified, trimethyl-silane modified, and diol modified. Modified Zorbax PSM packings are produced by chemically bonding a layer on the silica surface through siloxane bonds (Table 3.1). Silanized Zorbax PSM packings suppress adsorption effects and are the preferred choice when the mobile phase contains organic solvents. Unsilanized and diol modified Zorbax PSM packings should be used when the mobile phase consists of aqueous solvents. 

Chemically modified polymers have been used to determine polar compounds in water samples (37, 71). Chemical modification involves introducing a polar group into polymeric resins. These give higher recoveries than their unmodified analogues for polar analytes. This is due to an increase in surface polarity which enables the aqueous sample to make better contact with the surface of the resin (35). 

Figure 2. Sketch of an uncharged metal surface (simulated by the jellium model) covered by a macroscopic solvent layer, showing the components of the electric potential drop. 8%M is the surface potential of the metal modified by the solvent layer %s + 6%s is the surface potential of the solvent modified by the contact with the metal %s is the unmodified surface potential of the solvent layer at the external surface.

In the transmission electron microscopy (TEM) images, the starch nanoplatelets (SNPs) are believed to aggregate as a result of hydrogen bond interactions due to the surface hydroxyl groups [13] (Fig. lA). Blocking these interactions by relatively large molecular weight molecules obviously improves the individualization of the nanoparticles. The acetylated starch and cellulose nanoparticles (SAcNPs and CelAcNPs) appeared more individualized and monodispersed than their unmodified counterparts with a size of about 50 nm (Fig. IB C). 

For example, the increment in maximum stress over the neat polymer is 100% and 53% in the case of the unmodified- and the modified-clay-fiUed samples, respectively. The extraordinary results obtained with the unmodified clays were explained with the help of thermodynamics and surface energetics. They explained it as follows. 

Majumder and Bhowmick [381] have investigated the influence of the concentration of TMPTA on the surface properties of EPDM mbber, modified in the presence of EB. The surface energy of the TMPTA-modified EPDM mbber has been observed to increase as compared to the unmodified one. Table 31.4 displays the contact angles and the work of adhesion of water, for the control and the modified EPDM surfaces. 

Amongst the earliest measurements involving chemical functionality of the probe were those of Nakagawa et al. [69]. They investigated octadecyltrichlorosilane (OTS) chemically modified tips against chemically adsorbed monolayers of different alkyl-trichlorosilanes in ethanol, as shown schematically in Figure 14. When both tip and surface were modified by OTS, a large adhesive force was observed that was not present for the case of an unmodified silicon nitride tip on an OTS-modified surface. Additionally there... 

---