Surface force measurements, polymer adsorption

Fig. 3 a-c. Summary of data from different laboratories, obtained by surface force measurement, on the average layer thickness L as a function of tethered chain length for flat, tethered layers constructed by adsorption of amphiphilic polymers on mica. Adapted from Ref. 21. (a) Data of reference 20 on poly-tert-butylstyrene chains anchored by adsorbing blocks of poly-2-vinylpyridine. (b) Data of references 11 and 12 on polystyrene chains anchored by adsorbing blocks of poly-2-vinylpyridine. (c) Data of references 13 and 14 on polystyrene chains anchored by adsorbing zwitterionic groups [13] or by small adsorbing blocks of polyethyleneoxide [14]... 

The process of adsorption of polyelectrolytes on solid surfaces has been intensively studied because of its importance in technology, including steric stabilization of colloid particles [3,4]. This process has attracted increasing attention because of the recently developed, sophisticated use of polyelectrolyte adsorption alternate layer-by-layer adsorption [7] and stabilization of surfactant monolayers at the air-water interface [26], Surface forces measurement has been performed to study the adsorption process of a negatively charged polymer, poly(styrene sulfonate) (PSS), on a cationic monolayer of fluorocarbon ammonium amphiphilic 1 (Fig. 7) [27],... 

Up to date, besides the SFA, several non-interferometric techniques have been developed for direct measurements of surface forces between solid surfaces. The most popular and widespread is atomic force microscopy, AFM [14]. This technique has been refined for surface forces measurements by introducing the colloidal probe technique [15,16], The AFM colloidal probe method is, compared to the SFA, rapid and allows for considerable flexibility with respect to the used substrates, taken into account that there is no requirement for the surfaces to be neither transparent, nor atomically smooth over macroscopic areas. However, it suffers an inherent drawback as compared to the SFA It is not possible to determine the absolute distance between the surfaces, which is a serious limitation, especially in studies of soft interfaces, such as, e.g., polymer adsorption layers. Another interesting surface forces technique that deserves attention is measurement and analysis of surface and interaction forces (MASIF), developed by Parker [17]. This technique allows measurement of interaction between two macroscopic surfaces and uses a bimorph as a force sensor. In analogy to the AFM, this technique allows for rapid measurements and expands flexibility with respect to substrate choice however, it fails if the absolute distance resolution is required. 

Surface Force Measurements. Another method to measure the thickness of adsorbed layers is by the surface force apparatus (SFA) (17). In this method two freshly cleaved mica sheets are glued to the surfaces of two crossed cylindrical lenses. Polymer chains are then allowed to adsorb on the mica sheets. In order to measure the thickness of the adsorbed layers the two cylinders are brought in contact and the force between them is measured as a fimction of separation. The onset of the repulsive force associated with compression of the adsorbed layer can be related to the thickness of the adsorbed layer. On the other hand, in the event of bridging between the adsorbed layers the force will be attractive. Recent advances in the instrument have made it possible to probe the effect adsorption has on the flow of fluid past a surface (18). 

This paper contributes to the literature by quantifying anionic polymer adsorption onto the clay minerals kaolinite, feldspar, mica and quartz by X-ray photoelectron spectroscopy (XPS). XPS measures the sorbed amount directly rather than by a subtraction technique. This enables an insight into how effective selective flocculation is for obtaining kaolinite from a mineral mixture. Atomic force microscopy (AFM) is also used to image polymer adsorption onto mineral surfaces and the effectiveness of this technique applied to mineral surfaces is discussed here. 

In the case of adsorbed molecules, like those in Figure 4.34c, which are not anchored to the surface, the measured surface forces depend significantly on the rate of approaching of the two surfaces [433,434]. The latter effect can be attributed to the comparatively low rate of exchange of polymer between the adsorption layer and the bulk solution. This leads to a hysteresis of the surface... 

---