Sulfonamides methods

The first synthesis of optically pure N-methylated derivatives of Ala, Leu, Phe, and Tyr was published by Fischer and Lipschitz in 1915 73 using the sulfonamide method. Two main developments have ensured that this method remains useful for the preparation of TV-alkyl amino acids both in solution and solid phase (1) the introduction of the Mitsunobu reaction for the alkylation step and (2) the introduction of replacements for Tos (such as the Fukuyama Nbs) that allow easy removal of the sulfonamide protecting group after the alkylation step. Sulfonamide-protected amino acid derivatives can be alkylated in two different ways. Because of the acidity of the sulfonamide hydrogen it is possible to introduce the N-substituent either by direct alkylation (e.g., alkyl halides) or by the Mitsunobu reaction 74 (Scheme 4). 

Richman and Atkins (1974) reported the generality of the sulfonamide method to prepare the polyaza-crowns. They used a ditosylate ester starting material rather than a dihalide. A similar reaction was reported at the same time by Cram (1977) in a patent filed in 1974. The so-called Richman-Atkins cyclization reaction is the reaction of the polysulfonamide or its disodium or dipotassium salt with a ditosylate or a dimesylate. The interior sulfonamide... 

The sulfonamide method has been used to prepare aza-crowns with a methylene unit between nitrogen atoms or nitrogen and oxygen atoms. The bis-sulfonamide was reacted with dibromomethane, benzal bromide, or methylene ditosylate (Krakowiak and Kotelko, 1982, 1983a, 1983b, Krakowiak et al., 1983) or with bis-chloromethyl ether (Krakowiak et al., 1984). Unfortunately, the macrocydes were not stable after the Af-tosyl groups were removed. 

Sulfonamides prepared from 2-aminoselenazoles by normal methods sometimes possess activity comparable to that of sulfathiazole (45, 47). 

Commercially important arenesulfonyl isocyanates are not directly accessible from the corresponding sulfonamides via phosgenation due to lack of reactivity or by-product formation at elevated temperatures. A convenient method for their preparation consists of the reaction of alkyl isocyanates with sulfonamides to produce mixed ureas which, upon phosgenation, yield a mixture of alkyl and arenesulfonyl isocyanates. The desired product can be obtained by simple distillation (16). Optionally, the oxalyl chloride route has been employed for the synthesis of arenesulfonyl isocyanate (87). 

In subsequent studies attempting to find a correlation of physicochemical properties and antimicrobial activity, other parameters have been employed, such as Hammett O values, electronic distribution calculated by molecular orbital methods, spectral characteristics, and hydrophobicity constants. No new insight on the role of physiochemical properties of the sulfonamides has resulted. Acid dissociation appears to play a predominant role, since it affects aqueous solubiUty, partition coefficient and transport across membranes, protein binding, tubular secretion, and reabsorption in the kidneys. An exhaustive discussion of these studies has been provided (10). 

The most common method for the preparation of sulfonamides is by the action of A/-acetylsulfanilyl chloride with the appropriate amine (1). Excess amine or suitable base is used to neutralize the hydrochloric acid formed. 

In a few cases, A/ -heterocycHc sulfanilamides have been prepared by the condensation of an active heterocycHc haHde with the sulfonamide nitrogen of sulfanilamide or its A/-acetyl derivative in the presence of an acid-binding agent. Sulfapyridine, sulfadiazine, and sulfapyrazine have been made by this method (1), but the most important appHcation is probably for the synthesis of sulfachlorapyridazine (9) and sulfamethoxypyridazine (10) (45). 

Dialkylation of an amine or sulfonamide with a 1,3-dihalide provides a further route to azetidines <79CRV33l, 64HC( 19-2)88 5). Examples of this approach are the formation of N-tosylazetidine from tosylamide and l-bromo-3-chloropropane and the formation of N-alkylazetidinyl esters (36). The latter reaction works well except for R=Me the former provides a useful route to azetidine since the tosyl group can be removed by reductive methods. 

A polymer-supported sulfonamide, prepared from an amino acid activated ester and a polystyrene-sulfonamide, is stable to acidic hydrolysis (CF3COOH HBr/ HOAc). It is cleaved by the safety-catch method shown below. ... 

Mg, MeOH, sonication 20-40 min, 100% yield. Sulfonamide-protected amides are also efficiently cleaved by this method. ... 

Ceric ammonium nitrate (CAN), CH3CN, H2O, it, 12 h, 96% yield. Benzylamides are not cleaved under these conditions. Some of the methods used to cleave the benzyl group should also be effective for cleavage of the PMB group. Ceric ammonium nitrate is also used to cleave the PMB group from a sulfonamide nitrogen. ... 

The method illustrates the ability of the sodium hydride-dimethylformamide system to effect the alkylation of aromatic sulfonamides under mild conditions and in good yield. The method appears to be fairly general. The submitters have prepared N,N-diethyl- and N,N-di- -butyl- >-toluenesulfonamide as well as 2-(/ -tolyIsuIfonyl)benz[/]isoindoline from 2,3-bis-(bromomethyl)naphthalene, and 1 %-tolylsulfony])pyrrolidine from 1,4-dichIorobutane the yield of purified product exceeded 75% in each case. 

Amides are very weak nucleophiles, far too weak to attack alkyl halides, so they must first be converted to their conjugate bases. By this method, unsubstituted amides can be converted to N-substituted, or N-substituted to N,N-disubstituted, amides. Esters of sulfuric or sulfonic acids can also be substrates. Tertiary substrates give elimination. O-Alkylation is at times a side reaction. Both amides and sulfonamides have been alkylated under phase-transfer conditions. Lactams can be alkylated using similar procedures. Ethyl pyroglutamate (5-carboethoxy 2-pyrrolidinone) and related lactams were converted to N-alkyl derivatives via treatment with NaH (short contact time) followed by addition of the halide. 2-Pyrrolidinone derivatives can be alkylated using a similar procedure. Lactams can be reductively alkylated using aldehydes under catalytic hydrogenation... 

Amides can also be alkylated with diazo compounds, as in 10-49. Salts of sulfonamides (ArS02NH ) can be used to attack alkyl halides to prepare N-alkyl sulfonamides (ArS02NHR) that can be further alkylated to ArS02NRR. Hydrolysis of the latter is a good method for the preparation of secondary amines. Secondary amines can also be made by crown ether assisted alkylation of F3CCONHR (R = alkyl or aryl) and hydrolysis of the resulting F3CCONRR. ... 

Sulfonic esters are most frequently prepared by treatment of the corresponding halides with alcohols in the presence of a base. The method is much used for the conversion of alcohols to tosylates, brosylates, and similar sulfonic esters. Both R and R may be alkyl or aryl. The base is often pyridine, which functions as a nucleophilic catalyst, as in the similar alcoholysis of carboxylic acyl halides (10-21). Primary alcohols react the most rapidly, and it is often possible to sulfonate selectively a primary OH group in a molecule that also contains secondary or tertiary OH groups. The reaction with sulfonamides has been much less frequently used and is limited to N,N-disubstituted sulfonamides that is, R" may not be hydrogen. However, within these limits it is a useful reaction. The nucleophile in this case is actually R 0 . However, R" may be hydrogen (as well as alkyl) if the nucleophile is a phenol, so that the product is RS020Ar. Acidic catalysts are used in this case. Sulfonic acids have been converted directly to sulfonates by treatment with triethyl or trimethyl orthoformate HC(OR)3, without catalyst or solvent and with a trialkyl phosphite P(OR)3. ... 

Aziridines are important compounds due to their versatility as synthetic intermediates. In addition, aziridine rings are present in innumerable natural products and biologically active compounds. Nitrene addition to alkenes is one of the most well established methods for the synthesis of aziridines. Photolysis or thermolysis of azides are good ways to generate nitrenes. Nitrenes can also be prepared in situ from iodosobenzene diacetate and sulfonamides or the ethoxycarbonylnitrene from the A-sulfonyloxy precursor. 

Soil samples are extracted with buffered acetonitrile with a mechanical shaker. Alter centrifuging, aliquots of the extracts are amended with isotopically labeled internal standards and evaporated to dryness. The samples are reconstituted and analyzed by LC/MS/MS. This method determines soil residues of flucarbazone-sodium, sulfonic acid, sulfonamide and NODT with an LOQ of 0.001 mg kg for each analyte. 

Seven replicate recoveries of flucarbazone-sodium, sulfonic acid, sulfonamide and NODT from well water fortified af 50 ng L averaged 106,100,89 and 106%, respec-fively. Therefore, the LOQ is 50 ng L for each analyte. The method detection limits for flucarbazone-sodium, sulfonic acid, sulfonamide and NODT, as determined by the United States Environmental Protection Agency (USEPA) recommended technique, are 5, 11, 20 and 19ngL, respectively. 

In 1994, only 15% of EPA method validations (tolerance method validation and environmental chemistry method validations) that involved GC were carried out using GC/MS. In 2002, this number is reversed in that 85% of the GC methods that were validated by both programs used GC/MS. Many of the compounds investigated in these method trials were polar compounds, and hence these compounds required derivatization in order to be amenable to GC. One common methylating agent is (trimethylsilyl)diazomethane, which is used, for example, to methylate the sulfonamide flumetsulam. As opposed to HPLC/MS, where derivatization is often not necessary, the GC/MS procedure involves an extra step to methylate this compound, under dry conditions, prior to determination by GC/MS. 

Particularly, some newly developed drags, which incorporate the N-acyl sulfonamide moiety [8-10], are synthesized from the parent sulfonamides, by their coupling with acid chlorides or carboxylic anhydrides in basic conditions [11-15]. Unfortunately all these methods lead to substantial waste products. Less common reports mentioning this transformation under acidic conditions (Bronsted or Lewis acids) do not systematically examine the purpose and limitations of the reaction [16]. 

Sulfonamides are very difficult to hydrolyze. However, a photoactivated reductive method for desulfonylation has been developed.240 Sodium borohydride is used in conjunction with 1,2- or 1,4-dimethoxybenzene or 1,5-dimethoxynaphthalene. The photoexcited aromatic serves as an electron donor toward the sulfonyl group, which then fragments to give the deprotected amine. The NaBH4 reduces the radical cation and the sulfonyl radical. 

Carbenes from Diazo Compounds. Decomposition of diazo compounds to form carbenes is a quite general reaction that is applicable to diazomethane and other diazoalkanes, diazoalkenes, and diazo compounds with aryl and acyl substituents. The main restrictions on this method are the limitations on synthesis and limited stability of the diazo compounds. The smaller diazoalkanes are toxic and potentially explosive, and they are usually prepared immediately before use. The most general synthetic routes involve base-catalyzed decomposition of V-nitroso derivatives of amides, ureas, or sulfonamides, as illustrated by several reactions used for the preparation of diazomethane. 

For the sulfonation step, amino acids were added as their sodium salts. The reactions were carried out in cold aqueous solution, in which the sulfonamides were immediately precipitated. By the same method dansylations of amino acids could be accomplished with N-( 1 -dimethylaminonaphthalene-5-sulfonyl)-Af -methylimidazolium chloride ... 

---