Succinates, 3-substituted

Starch adipate, a cross-bonded starch for food use, is made by reaction with adipic anhydride, which is formed from adipic acid in the presence of excess acetic anhydride. It is also a labile ester, and after hydrolysis with alkali, followed by acidification, is extracted with ethyl acetate and silylated. Gas chromatographic analysis is performed on a capillary column of fused silica coated with dimethyl siloxane, film thickness 5 pm. Pimelic acid is the internal standard. The method cannot differentiate between mono- and disubstitution. Alkyl succinate substitution can be determined using the same procedure as for adipate. 

Kwon C, Jung S. Stereoisomeric separation of some flava-nones using highly succinate-substituted a-cyclosophoro-octadecaoses as chiral additives in capillary electrophoresis. Carbohydr. Res. 2011 346 133-139. 

The polyispbptylenes (PIB) having molecular weights ranging from 1000 to 2000 are substituted by maleic anhydride, and the polyisobutylene succinic anhydride (PIBSA) formed is neutralized by a polyethylene-polyamine as indicated in Figure 9.10. 

B) Acetic, succinic anhydride phthalic anhydride (and substituted derivatives). 

Methyl, ethyl, n-propyl, isopropyl, n-hutyl, benzyl, cyclohexyl esters of formic, acetic, oxalic, succinic, tartaric, citric, benzoic, salicylic (and other substituted benzoic acids), phthalic and cinnamic acids phenyl esters of acetic, benzoic and salicylic acids. 

A further example is given below illustrating the use of a dibasic anhydride (succinic anhydride) the succinoylation reaction is a valuable one since it leads to aroyl carboxylic acids and ultimately to polynuclear hydrocarbons. This general scheme of synthesis of substituted hydrocarbons through the use of succinic anhydride is sometimes called the Haworth reaction. Thus a-tetralone (see below) may be reduced by the Clemmensen method to tetralin (tetrahydronaphthalene) and the latter converted into naphthalene either catal3d.ically or by means of sulphur or selenium (compare Section, VI,33). 

Cydopentane reagents used in synthesis are usually derived from cyclopentanone (R.A. Ellison, 1973). Classically they are made by base-catalyzed intramolecular aldol or ester condensations (see also p. 55). An important example is 2-methylcydopentane-l,3-dione. It is synthesized by intramolecular acylation of diethyl propionylsucdnate dianion followed by saponification and decarboxylation. This cyclization only worked with potassium t-butoxide in boiling xylene (R. Bucourt, 1965). Faster routes to this diketone start with succinic acid or its anhydride. A Friedel-Crafts acylation with 2-acetoxy-2-butene in nitrobenzene or with pro-pionyl chloride in nitromethane leads to acylated adducts, which are deacylated in aqueous acids (V.J. Grenda, 1967 L.E. Schick, 1969). A new promising route to substituted cyclopent-2-enones makes use of intermediate 5-nitro-l,3-diones (D. Seebach, 1977). 

Succineins. Succineins are carboxyethyl-substituted pyronines made by substituting succinic anhydride for formaldehyde in the basic synthesis,... 

Succinic esters condense with aldehydes and ketones in the presence of bases, eg, sodium alkoxide or piperidine, to form monoesters of alkybdenesuccinic acids, eg, condensation of diethyl succinate with acetone yields ethyl 2-isopropyhdenesuccinate (eq. 3). This reaction, known as Stobbe condensation, is specific for succinic esters and substituted succinic esters (98,99). 

Alkyl-substituted succiiiimides are prepared by reaction of alkyleneamines such as TETA or TEPA with the corresponding alkyl substituted succinic anhydride (43). 

When the 1-position is substituted, 3- and 5-aminopyrazoles react at the C-4 carbon atom, the reactivity of which is enhanced by the amino group. Thus pyrazolo[3,4-Z ]pyridines (545) are obtained either by the Skraup synthesis or from 1,3-diifunctional compounds. Here also aminopyrazolinones have been used instead of aminopyrazoles to prepare (545 R = OH). If 1,4-ketoesters (succinic acid derivatives) are used instead of /3-ketoesters, pyrazolo[3,4-Z ]azepinones (546) are obtained. 

Substituent effect, additivity of, 570 electrophilic aromatic substitution and, 560-563 summary of. 569 Substitution reaction, 138 Substrate (enzyme), 1041 Succinic acid, structure of, 753 Sucralose, structure of. 1006 sweetness of, 1005 Sucrose, molecular model of. 999 specific rotation of, 296 structure of, 999 sweetness of, 1005 Sugar, complex, 974 d, 980 L, 980... 

Reactions with anhydrides afford interesting compounds having a carboxylic acid function (Table 26, entries 5 and 7 and Figure 40). It is notable that in the case of succinic anhydride, if the reaction is carried out at 25 °C, only one substitution occurs on the nitrogen atom, if the temperature is increased to 180 °C, there is a second substitution giving rise to a heterocyclic substituent (Table 26, entries 5-8). 

Efficient syntheses of substituted succinic acids (Table 2, Nos. 5, 6) have been developed in the past a more recent application is the coupling of 16 as part of a semi-bullvalene synthesis [130]. 

Alternative routes to -amino acids have also been explored and involve, stereoselective alkylation of chiral derivatives of y9-alanine [136-140], Curtius rearrangement of enantiomerically pure and regioselectively protected substituted-succinic acids [134, 141, 142] (the approach is also suitable for the synthesis of y9 -amino acids [143]), or the formation of chiral isoxazolidinone intermediates [144]. 

A number of substituted triazines are used as herbicides, and their biodegradation has been discussed in Chapter 10, Part 1. Treatment of soil contaminated with atrazine (2-chloro-4-(ethylamino)-6-isopropylamino-l,3,5-triazine) illustrated a number of significant features. Although the soil that was used had the potential for degradation, a laboratory experiment with Pseudomonas sp. strain ADP that had an established potential for atrazine degradation revealed important limitations. There was a substantial decline in the numbers of Pseudomonas sp. strain ADP and only limited mineralization. Supplementation with citrate or succinate increased the survival of the strain, and successful mineralization was dependent on the preservation of a carbon/nitrogen ratio >10 (Silva et al. 2004). The last would apply generally to substrates with a low C/N ratio such as triazines. 

Diethylaluminum cyanide mediates conjugate addition of cyanide to a, (3-unsaturated oxazolines. With a chiral oxazoline, 30-50% diastereomeric excess can be achieved. Hydrolysis gives partially resolved a-substituted succinic acids. The rather low enantioselectivity presumably reflects the small size of the cyanide ion. 

Hydroxamic acids are an important class of compounds targeted as potential therapeutic agents. A-Fmoc-aminooxy-2-chlorotrityl polystyrene resin 61 allowed the synthesis and subsequent cleavage under mild conditions of both peptidyl and small molecule hydroxamic acids (Fig. 14) [70]. An alternative hydroxylamine linkage 62 was prepared from trityl chloride resin and tV-hydroxyphthalimide followed by treatment with hydrazine at room temperature (Scheme 30) [71]. A series of hydroxamic acids were prepared by the addition of substituted succinic anhydrides to the resin followed by coupling with a variety of amines, and cleavage with HCOOH-THF(l 3). 

The aromatic spacer group of the model receptors prevent the formation of intramolecular hydrogen bonds between the opposing carboxyls yet these functions are ideally positioned for intermolecular hydrogen bonds of the sort indicated in 32. The acridine derivatives do indeed form stoichiometric complexes with oxalic, malonic (and C-substituted malonic acids) as well as maleic and phthalic acids, Fumaric, succinic or glutaric acids did not form such complexes. Though protonation appears to be a necessary element in the recognition of these diacids, the receptor has more to... 

Variation of Equivalent Weight. In an attempt to produce more flexible coatings, the UPE A formulation was modified to increase the equivalent weight by substituting succinic anhydride for a portion of the maleic anhydride. These unsaturated polyesters were prepared by the same method as above and the compositions and their properties are summarized in Table II. 

The equivalent weight increased from 210 for UPE A to 316 for UPE E with one third of the maleic anhydride was replaced with succinic anhydride and 634 for UPE F with two thirds of the maleic anhydride is replaced with succinic anhydride. This change will effectively decrease the crosslink density of the final cured film. The Brookfield viscosities of the two new polyesters (E and F) are less than those from the first series. Since the molecular weights should be about the same (1760), it is not surprising that the Brookfield viscosities were relatively constant for all three unsaturated polyesters. The slight decreasing trend in viscosity with increasing succinic anhydride in the unsaturated polyester may be due to the increased free volume obtained when succinic anhydride is substituted for maleic anhydride. 

---