STORE, description

Examples of the second technique are Beilstein (currently with SANDRA on PC), MACCS (for storage and retrieval of structural data) and DARC-SMS (for storage and retrieval of structural data). Both MACCS and DARC-SMS can be coupled with general Database Management Systems (ORACLE, 1032) to store descriptive data. Other examples are CCSD, the Cambridge Crystallographic Database, PDB, the Brookhaven... 

To make selection of pertinent documents from the world literature easier, a computer program has been prepared for storing descriptive text and numerical data. The resulting library of integral experiments currently contains about 1500 references, abstracts, and... 

Suggested retail price 5 (six tests). Availability Hardware and department stores. Description Easy to use, nontoxic. 

Availabibty Home Depot and paint stores. Description Thick alkaline paste and flbrous laminate to remove many layers of paint. The thick paste is applied to a surface, then covered with the laminate paper. It is removed the next day, with all of the layers of paint (up to 30) under it affixed. High-lime-content paste stabilizes lead to 5 parts per million. Residue is washed away with water, and neutralized with vinegar. 

Suggested retail price 0.40- 0.50/square foot. Availability Toll-free number or hardware stores. Description Strong, woven, wall covering that can be embedded with a paint-type encapsulant as a reinforcement material more attractive range of finishes over encapsulants alone for a stronger... 

It has already been noted that the bill of materials function provides for each fabricated part, component, or assembly of the SSR a list of raw materials, parts, and sub-components that are needed for fabrication of that element. Thus, an entry in the bill of materials information catalog is similar in concept to the list of ingredients for cooking a meal. Besides the list of ingredients, the recipe for a meal contains an ordered list of steps needed to prepare the meal. In a similar manner, the SSR must store descriptive information for all construction steps needed to fabricate each SSR element. The SSR s ability to store and make accessible detailed information about the set of fabrication steps and processes needed for the fabrication of each SSR element (part, component, assembly of components, including the SSR itself) is called the construction plan function. 

Availability of a representative set of data examples. Such a set may significantly simplify construction of any automatic interpretation system. The example data is usually obtained from calibration pieces, however, they usually represent only the most common defects and are usually expensive to manufacture. Recently more and more data is stored as digital inspection records, unfortunately the stored data is rarely fully classified, as this would increase the cost of inspection (usually only the serious defects are given full description in the reports). 

Many of the sites did not effectively identify the nature and location of potential emergencies. The contractors SSAHPs at Sites A, B, F, and K did not include site-specific information about the nature and source of potential emergencies. The plan in effect at Site H did not provide a description of the nature and location of potential spill hazards and emergencies, nor did it indicate the type of spill containment equipment available or the locations on site where this and other emergency response equipment was stored. 

As failure data relating to mechanical components differ widely from source to source, TNO has set up a documentation system in which all relevant information is stored in one, uniform automated code called COMPI, which uses a component description code for the following information system of... 

Data cell A unique compartment of the taxonomy in which data are stored, defined by specific equipment, service and failure descriptions. 

Migrating only the raw data - the characters, numbers, bits, and bytes - forward is not enough to ensure usability. The meta data and the context for the application or database must also be migrated forward. Meta data are the code to the machine-stored bits and bytes. Meta data are the data about the data. They describe the data in the database. The meta data documentation describes the method of data capture, the application used to access the data, security rules for the tables and columns, and other descriptive and procedural information. For derived or calculated data, the algorithm or protocol that was used must be known. The documentation then becomes something else that must be preserved. Without the meta data, the reader will only see a series of alphabetic characters. Without the entire described context associated with the data, the data have no meaning. 

Information regarding specimens and tasks is stored in two databases. The specimen database contains descriptive information and operating parameters for a number of specimens. The run database contains information regarding the data collection activities that have been performed or that are pending. 

---