Steels carbon steels

Discharge head / Yes Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel AUS AUS 316 AUS Duplex... 

Discharge Head/ Suction Can Yes Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel AUS AUS 316 AUS Duplex Super Duplex... 

Ethylene Cast Steel Carbon Steel Carbon Steel Carbon Steel Mechanical... 

BALANCING DRUM Carbon steel Carbon steel or nickel steel Carbon steel Carbon steel Carbon steel or stainless steel Alloy steel or stainless steel... 

The Bessemer process, as important as it was, produced only one kind of steel, carbon steel. Carbon steel consists primarily of iron with varying amounts of carbon added to produce a variety of properties. Today, carbon steels come in various forms, known as high-carbon, medium-carbon, low-carbon, extra-low-carbon, and ultra-low-carbon steels, each with a characteristic amount of carbon, ranging from more than 0.5 percent carbon at the high end to less than 0.015 percent carbon at the low end. 

Materials of Construction for Bulk Transport Because of the more severe service, construction materials for transportation usually are more restricted than for storage. Most large pipe lines are constructed of steel conforming to API Specification 5L or 5LX. Most tanks (cars, etc.) are built or pressure-vessel steels or AAR specification steels, with a few of aluminum or stainless steel. Carbon steel tanks may be hned with rubber, plastic, nickel, glass, or other materials. In many cases this is practic and cheaper than using a stainless-steel tank. Other materials for tank construction may be proposed and used if approved by the appropriate authorities (AAR and DOT). 

Steel Carbon steel is the most common, cheapest, and most versatile metal used in industry. It has excellent ductility, permitting many cold-forming operations. Steel is also very weldable. 

Ethylene Ethylene Dichloride Cast Steel Cast Iron Carbon Steel Cast Iron Carbon Steel Steel Carbon Steel K Monel Mechanical Mechanical Cast Iron Mall. Iron K Monel ... 

Butadiene Casing C. Steel—Rings C.I. Impeller C.I.—Rings C. Steel Carbon Steel 13% Chrome Steel Mechanical... 

Propylene Casing C. Steel— Rings C.I. Imp. C.I.—Rings C. Stl Carbon Steel Carbon Steel Mechanical... 

Carbon Steel—Rings C.I. Cast Iron C.I.—Rings C. Steel Cast Iron Carbon Steel Chrome Steel Carbon Steel Mechanical Mall. Iron ... 

Acid, 32% Hydrochloric Carbon Rubber Carbon Hard Stainless Steel Carbon Steel Carbon Rubber or Ring Rubber Carbon Rubber ... 

Case and gland studs Yes Carbon steel Carbon steel AISI4140 steel AISI 4140 steel AISI 4140 steel AISI 4140 steel AISI 4140 steel AISI 4140 steel K-Monel, hardened (8) AISI 4140 steel AISI 4140 steel AISI 4140 steel Duplex (8)... 

The entectoid transformation is an important one not only for this specific carbon composition, bnt for classifying all types of steels. Carbon steels have carbon contents between 0.1 and 1.5 wt%. Those with carbon contents less than 0.8% are termed hypoeutectoid steels, and those with greater than 0.8% C are called hypereutectoid steels. Further classifications of steels are given in Table 2.4. 

Customer s laboratory says there are severe pitting corrosion problems, especially under slimes. Corrosometer corrosion rates indicate 6 to 8 mpy on steel. Carbon steel coupons indicate 10 to 12 mpy. Copper is 0.4 mpy. 

Methanol tanks can be made from stainless steel, carbon steel, or fiberglass (using resins compatible with methanol). The steel tanks are welded together while the fiberglass tanks are molded around a form with the ends glued on. Some steel tanks are coated internally with an epoxy to prevent corrosion over time. The epoxies made for gasoline are not compatible with methanol and will come off the walls of the tank within a short time, causing major problems with... 

---