Stabilisation polymeric dispersions

Napper, D.H. (1983) Polymeric Stabilisation of Dispersions, Academic Press, London. 

At this moment there are three ways to stabilise the polymeric dispersions in liquid polyethers with NAD ... 

The structure (6.8) is another type of NAD formed in situ by transfer reaction with the tertiary amine type polyethers. Addition of a high molecular weight polyether initiated by an alkanolamine, ethylene diamine, N-methyl substituted propylene diamine, or N,N dimethyl dipropylene diamines in the polyether polyol used for grafting leads to the formation of very stable polymeric dispersions [37]. The solid fraction has particles of low median diameter (<1.5 pm). The resulting polymer polyols have low viscosities which give good stabilisation of the polymeric dispersion. 

The nonreactive NAD are structures without polymerisable double bonds, but have a remarkable stabilisation effect on polymeric dispersions in polyether media. The main characteristic of such kinds of nonreactive NAD is to have an organic segment with high affinity for the carbocatenary vinylic polymer chemically linked to a high molecular weight polyether chain, which has a high affinity for the continuous liquid polyether matrix. 

The aromatic nuclei of the bisphenol A segment have a high affinity for the aromatic nuclei of styrene - ACN copolymer styrene units, the polyether chains having a strong interaction with the liquid poly ether medium. As an immediate consequence, the structure 6.15 assures a good steric stabilisation of polymeric dispersions in liquid polyether polyols (see the structure in Figure 6.6). 

D.A. Napper, Polymeric Stabilisation of Colloidal Dispersions, Academic Press, New York, 1983. 

Poly(alkylene oxide)-based (PEO-PPO-PEO) triblock and diblock copolymers are commercially successful, linear non-ionic surfactants which are manufactured by BASF and ICI. Over the last four decades, these block copolymers have been used as stabilisers, emulsifiers and dispersants in a wide range of applications. With the development of ATRP, it is now possible to synthesise semi-branched analogues of these polymeric surfactants. In this approach, the hydro-phobic PPO block remains linear and the terminal hydroxyl group(s) are esteri-fied using an excess of 2-bromoisobutyryl bromide to produce either a monofunctional or a bifunctional macro-initiator. These macro-initiators are then used to polymerise OEGMA, which acts as the branched analogue of the PEO block (see Figures 2 and 3). 

AMP-95 is a non-polymeric charge stabiliser because of its organic structure and low molecular weight of 89 it is often referred to as a micro dispersant (Figure 1). 

The stability of electrostatically charged sols has been studied extensively and is now reasonably well understood. More recently the stabilising action of adsorbed or chemically anchored non-ionic polymers has received much attention. There has been however little systematic work on polyelectrolyte stabilisers apart from a number of investigations of the flocculation of particles bearing adsorbed biopolymers, usually proteins, by simple salts ( 2). These have shown that polyelectrolyte covered particles can be more stable with respect to the addition of salt than simple charged systems, and the extra stability has been ascribed to the polymeric nature of the surface layer. The precise mechanism by which polyelectrolytes stabilise dispersions in the presence of high concentrations of salt has however remained unclear. 

Napper D (1983) Polymeric stabilisation of colloidal dispersions. Academic Press... 

The polymeric adsorbents are usually prepared by variations of two-phase suspension processes. These refer to systems where microdroplets of monomers and solvent are converted into solid beads upon polymerisation. In the case where the monomers are not water soluble, as in the case of styrene-based polymers and many methacrylate-based polymers, the monomers, a solvent and a droplet stabiliser are suspended as droplets by stirring in water and then polymerised (o/w suspension polymerisation). The particle size and dispersity can be influenced by the stirring speed and the type of stabiliser. So far, only a few examples of the preparation of imprinted polymers in bead format have been described [4-8] and these are thoroughly reviewed in Chapter 12. In non-covalent imprinting, the main limitation to the use of these techniques is that the imprinting method often requires the use of polar partly water soluble monomers or templates in combination with less polar water insoluble components. Use of the o/w suspension method... 

Nonionic surfactants and both natural and synthetic polymers (which are collectively referred to as polymeric surfactants), when used to stabilise soHd/hquid (suspensions) andliquid/liquid (emulsions) disperse systems, play important roles in many industrial applications including paints, cosmetics, agrochemicals, and ceramics. Nonionic surfactants and polymers are particularly important for the preparation of concentrated dispersions - that is, with a high volume fraction

[Pg.115]

Polymers are also essential for the stabilisation of nonaqueous dispersions, since in this case electrostatic stabilisation is not possible (due to the low dielectric constant of the medium). In order to understand the role of nonionic surfactants and polymers in dispersion stability, it is essential to consider the adsorption and conformation of the surfactant and macromolecule at the solid/liquid interface (this point was discussed in detail in Chapters 5 and 6). With nonionic surfactants of the alcohol ethoxylate-type (which may be represented as A-B stmctures), the hydrophobic chain B (the alkyl group) becomes adsorbed onto the hydrophobic particle or droplet surface so as to leave the strongly hydrated poly(ethylene oxide) (PEO) chain A dangling in solution The latter provides not only the steric repulsion but also a hydrodynamic thickness 5 that is determined by the number of ethylene oxide (EO) units present. The polymeric surfactants used for steric stabilisation are mostly of the A-B-A type, with the hydrophobic B chain [e.g., poly (propylene oxide)] forming the anchor as a result of its being strongly adsorbed onto the hydrophobic particle or oil droplet The A chains consist of hydrophilic components (e.g., EO groups), and these provide the effective steric repulsion. 

Polymeric Surfactants for Stabilisation of Preformed Latex Dispersions... 

---