Spontaneous alternation measurement

A characteristic behaviour shown by rats is a class of exploratory activity known as spontaneous alternation. This is normally measured in a symmetrical T-, Y- or E-maze, and the animal is allowed to freely explore the apparatus on successive trials. The rat tends to distribute its responses in a non-random manner, visiting the most novel (least visited) arm on any given trial, and normal rats alternate spontaneously at a rate of 70-80%. The effect of lead on spontaneous alternation has been studied. 

A number of studies of the effect of lead on performance in the 8 arm radial maze have been carried out. Flynn et al. (1979) used two dosing procedures perinatal administration (2625 ppm Pb) and a three stage, longterm dosing regimen (1090 ppm Pb to maternal rats 225/tg Pb to neonates and 1363 ppm Pb to weaned animals). No effect of lead was found in the number of arms entered or in a measure of spontaneous alternation (see above) in any dose group. 

However, the discipline of behavioural toxicology, for all its recent methodological and interpretative improvements, is still a science in its infancy, and a healthy if somewhat unjustified prejudice exists against some of the conclusions made from behavioural studies. This is probably due to the fact that behaviour is a very sensitive to extrinsic (or indeed, intrinsic) influences, and often it may be difficult to separate the two. Another reason is the use of a lexicon that is often difficult to comprehend. Examples from this lexicon include terms such as paradigm, acquisition or performance. Paradigm, when used in this context, is a behavioural test type. Often there may be differences between behavioural apparatus in different locations, but the measured behaviour is the same. An example of this is spontaneous alternation, which can be measured in a T-maze, but also E- or Y-mazes. Acquisition is a curious term which is used extensively in experimental psychology. It is defined as the state when a experimental animal has established some form of response in which it can solve a given experimental situation. This could be called learned or conditioned behaviour. However, it is not possible to conclude that an animal has learned a maze merely because it can solve it. An example of this can be shown in radial mazes, where an animal merely turns left (or, for example, third left) when it leaves a visited arm. To all intents and purposes it may be concluded that the... 

The copolymers consist of strictly alternating sequences of diene and olefin. C-NMR measurements Showed the microstructure of the butadiene units in BPR to be exclusively of the trans-1,4 configuration (Figure 8). The isoprene units in isoprene-ethylene copolymer (IER) contain 84 % trans-1,4, 15 % cis-1,4, and 1 % 3,4 structures (Figure 9). Spontaneous crystallization in unstretched BPR samples was detected by dilatometry and confirmed by X-ray diffraction and DSC measurements. The extrapolated equilibrium melting point is about -10 °C. 

For the alternant PAH that have been studied extensively, bay-region diol epoxides are important metabolically activated forms. Studies of the chemical and biological activity of a variety of diol epoxides have provided insight into the factors related to reactivity and biological activity. Chemical reactivity, as measured by spontaneous hydrolysis, correlated well with calculated quantum chemical parameters that estimate ir-electron stabilization upon conversion of the epoxide to a benzylic carbocation, provided... 

In the real world the stress tensor never vanishes and so requires a nonvanishing curvature tensor under all circumstances. Alternatively, the concept of mass is strictly undefined in flat Minkowski space-time. Any mass point in Minkowski space disperses spontaneously, which means that it has a space-like rather than a time-like world line. In perfect analogy a mass point can be viewed as a local distortion of space-time. In euclidean space it can be smoothed away without leaving any trace, but not on a curved manifold. Mass generation therefore resembles distortion of a euclidean cover when spread across a non-euclidean surface. A given degree of curvature then corresponds to creation of a constant quantity of matter, or a constant measure of misfit between cover and surface, that cannot be smoothed away. Associated with the misfit (mass) a strain field appears in the curved surface. 

More recently, Smith et al. have developed another model based on spontaneous curvature.163 Their analysis is motivated by a remarkable experimental study of the elastic properties of individual helical ribbons formed in model biles. As mentioned in Section 5.2, they measure the change in pitch angle and radius for helical ribbons stretched between a rigid rod and a movable cantilever. They find that the results are inconsistent with the following set of three assumptions (a) The helix is in equilibrium, so that the number of helical turns between the contacts is free to relax, (b) The tilt direction is uniform, as will be discussed below in Section 6.3. (c) The free energy is given by the chiral model of Eq. (5). For that reason, they eliminate assumption (c) and consider an alternative model in which the curvature is favored not by a chiral asymmetry but by an asymmetry between the two sides of the bilayer membrane, that is, by a spontaneous curvature of the bilayer. With this assumption, they are able to explain the measurements of elastic properties. 

The rotational relaxation of DNA from 1 to 150 ns is due mainly to Brownian torsional (twisting) deformations of the elastic filament. Partial relaxation of the FPA on a 30-ns time scale was observed and qualitatively attributed to torsional deformations already in 1970.(15) However, our quantitative understanding of DNA motions in the 0- to 150-ns time range has come from more accurate time-resolved measurements of the FPA in conjunction with new theory and has developed entirely since 1979. In that year, the first theoretical treatments of FPA relaxation by spontaneous torsional deformations appeared. 16 171 and the first commercial synch-pump dye laser systems were delivered. Experimental confirmation of the predicted FPA decay function and determination of the torsional rigidity of DNA were first reported in 1980.(18) Other labs 19 21" subsequently reported similar results, although their anisotropy formulas were not entirely correct, and they did not so rigorously test the predicted decay function or attempt to fit likely alternatives. The development of new instrumentation, new data analysis techniques, and new theory and their application to different DNAs in various circumstances have continued to advance this field up to the present time. 

Contrary to potentiometric methods that operate under null current conditions, other electrochemical methods impose an external energy source on the sample to induce chemical reactions that would not otherwise spontaneously occur. It is thus possible to measure all sorts of ions and organic compounds that can either be reduced or oxidised electrochemically. Polarography, the best known of voltammetric methods, is still a competitive technique for certain determinations, even though it is outclassed in its present form. It is sometimes an alternative to atomic absorption methods. A second group of methods, such as coulometry, is based on constant current. Electrochemical sensors and their use as chromatographic detectors open new areas of application for this arsenal of techniques. 

A yellow color developed when CPT and S02 were mixed, and the equilibrium constant of the molecular complex formation was measured as K = 0.0353 ( 40°C, in hexane) (2). This complex might be the intermediate in this alternating copolymerization, and it might participate both in the initiation and propagation steps of this spontaneous copolymerization. 

Alternative approaches, termed indentation thermal shock tests , with pre-cracks of known sizes have been used by several authors to assess thermal shock damage in monolithic ceramics. Knoop (Hasselmann et al., 1978 Faber etal, 1981) or Vickers (Gong etal., 1992 Osterstock, 1993 Andersson and Rowcliffe, 1996 Tancret and Osterstock, 1997 Collin and Rowcliffe, 1999, 2000 Lee et al., 2002) indentations were made on rectangular bars, which were then heated to pre-determined temperatures and quenched into water. Crack extensions from the indentations were measured as a function of quench temperature differential, and the critical temperature for spontaneous crack growth (failure) was determined for the material. Fracture mechanics analyses, which took into account measured resistance-curve (7 -curve) functions, were then used to account for the data trends. 

Intercalation reactions of the dichalcogenides with alkali metals are redox reactions in which the host lattice is reduced by electron transfer from the alkali metal. Lithium and sodium intercalation reactions, for example, have been studied using cells of the type Li/LiC104-dioxolane/MX2 andNa/Nal-propylene carbonate/MX2. The reactions proceed spontaneously to form the intercalation compound if the cell is short circuited alternatively, a reverse potential can be apphed to control the composition of the final product. Apart from their application in synthesis, such electrochemical cells can be used to obtain detailed thermodynamic information and to establish phase relations by measuring the dependence of the equilibrium cell voltage on composition (see Figure 4). 

For smaller particles, smaller stresses are exerted. Thus, in order to predict sedimentation it is necessary to measure the viscosity at very low stresses (or shear rates). These measurements can be carried out using a constant stress rheometer (Carrimed, Bohlin, Rheometrics, Haake or Physica). Usually, a good correlation is obtained between the rate of creaming or sedimentation, v, and the residual viscosity rj 0), as will be described in Chapter 21. Above a certain value of ri(0), v becomes equal to 0. Clearly, in order to minimize sedimentation it is necessary to increase rj 0) an acceptable level for the high shear viscosity must be achieved, depending on the application. In some cases, a high rj[0) may be accompanied by a high rj (which may not be acceptable for apphcation, for example if spontaneous dispersion on dilution is required). If this is the case, the formulation chemist should seek an alternative thickener. 

---