Specificity of test

Specificity of test not understood Precision limitations not recognized... 

ISO3046/IV Reciprocating internal combustion engines Performance. Part 1 Specifications for standard reference conditions and declarations of power, fuel consumption and lubricating oil consumption. Part 2 Test methods Part 3 Specification of test measurements. Part 4 Speed governing. Part 5 Torsional vibrations. Part 6 Specifications for overspeed protection. Part 7 Specifications for codes for engine power. 

Specification of Test Procedures for Electric Vehicle Traction Batteries, EUCAR, December 1996. 

Tensile, flexural and impact tests were performed based on the ASTM D-638, ASTM D-790 and ASTM D-256 standards respectively in order to analyze the effect of adding nano-CaC03 particles on the mechanical performances of PP/ CaC03 nanocomposites. For each compound, 5 samples were tested and the mean values were considered. The specifications of testing equipment and conditions are presented in table 3. 

Specification of test methods for plasticizers is included in ISO standard. The specification is applicable to phthalate plasticizers. The specification includes measurements of color and determination of density, water content, iodine value and refractive index which are subsequent parts of this standard. The methods of determination included in Parts II to V are discussed in separate sections of this chapter. 

HUBERT, R, et al. Specification of Test Criteria and RrobabUistic Approach The Case of Plutonium Air Transport Probabilistic Safety Assessment and Risk Management, PSA 87, Verlag TUV Rheinland, Cologne (1987). 

BROWN, M.L., et al.. Specification of Test Criteria for Containers to be Used in the Air Transport of Plutonium, Safety Reliability Directorate, UKAEA, London (1980). HARTMAN, WR, et al., An analysis of the engine fragment threat and the crush environment for small packages carried on US commercial jet aircraft . Packaging and Transport of Radioactive Materials, PATRAM 78 (Proc. Symp. New Orleans, 1978), Sandia National Laboratories, Albuquerque, NM (1978). 

Specification of test cases covering all aspects to requirements specification... 

This standard defines the classification of soldering materials through specifications of test methods and inspection criteria. These materials include liquid flux, paste flux, solderpaste... 

---