Criteria for testing

Preliminary Criteria for Testing a Proposed Reaction Mechanism— Stoichiometry and Derivation of a Rate Expression for the Mechanism... 

Above the transition temperature cf> = 0 and below the critical temperature 4> > 0. At T = 0, = 1. Any order parameter defined to have a magnitude of unity at zero temperature is said to be normalized. Criteria for testing the theory include a number of critical exponents, which are accurately known from experimental measurement. 

There are alternate criteria for testing the different models [Bovey, 1972 Chujo, 1967 Inoue et al., 1971, 1984]. The Bemoullian model requires... 

ANSI (1983). American National Standards Institute. American National Standard for Dosimetry—Personnel Dosimetry Performance—Criteria for Testing, ANSI N13.11-1983 (American National Standards Institute, New York). 

As a result of developing and validating filter/sorbent sampling methods, some additional criteria for testing were formulated and added to the original method testing criteria for these sampling trains. These are summarized below ... 

In Chapters III and IV, tables for estimating standard devistion from the range, and criteria for testing for extreme values are reproduced with permission of W.J. Dixon from Introduction to Statistical Analysis by Dixon and Massey (McGraw-Hill), and Criteria for Testing Extreme Mean by Dixon, Biometrics 9 (1953). 

Grubbs, F E (1950), Sample criteria for testing outlying observations. The Annals of Mathematical Statistics, 21 (1), 27-58. 

Our next task is to discover the relationship between the matrix elements of non-equivalent irreducible representations, the restrictions on the number of such representations, simple criteria for testing for irreducibility and a method for readily carrying out the reduction of a reducible representation. 

Criteria for test results are described below. Firstly, drop ball test will be stated. 

The standard deviations of the fit shown in Table I, as well as the smooth plot of an as a function of m in Figure 1, were used as criteria for testing the validity of Harned s Rule. Hamed s Rule is a good description of the data for m = 0.05, 0.1, 0.25, 0.5, and perhaps (as a borderline case, based on the value of ai2) at m = 1.0 mol kg-1. The nonlinear form of Equation 6 was used at m = 1.0 and 1.5 mol kg"1, where the greatest deviations from linearity were thought to occur. 

This leads, as we shall see, to a situation in which simple measurements of the rate constant, order, and activation energy of a chemical reaction do not provide sufficient data to establish uniquely the detailed mechanism of a chemical reaction. Instead, the task of determining an unambiguous mechanism confronts the experimenter with a problem which requires the application of the utmost ingenuity in devising criteria for testing the validity of the steps in any proposed mechanism. 

Confirm whether acceptance criteria for test method steps are met. 

This kind of variation drove FDA officials to distraction when they encountered it in the American new drug application. In the German clinical setting, variation from one patient to the other was more acceptable, if not always expected. German medical experts who evaluated Dociton s safety and efficacy accepted reports specific to individual patients that included few data points amenable to statistical comparison. Indeed, Germany s therapeutic culture supported decision making that relied on informal expert assessment rather than formally designated criteria for test results. 

Selection criteria for tests in Germany often excluded terminally ill patients, further reducing the frequency and severity of adverse reactions. Drawing on test results from the United States, German physicians avoided putting patients on Proleukin therapy who were likely to require intensive care. Employing a scale similar to ECOG, physicians divided patients with metastatic... 

Instrumental and technical factors equipment within specification, working correctly, properly calibrated, procedures established for operational control and calibration, traceability of measurement to the criteria for test validity. 

FDA has suggested a protocol for study and a criteria for preoperative preparation however, there have been no criteria for tests for preparation of access sites except for reference to a 1 log reduction for preparation of an injection site. Especially for site preparation, the level of the natural, normal flora of the area of the body under test for effectiveness must be considered. The authors... 

Acceptance criteria Clear statement of success criteria for test. 

Table IOlI Parameters and criteria for testing susceptibility to stress-corrosion cracking of prestressing steel...

Robert A. Friedlander, Proposed Criteria for Testing the Validity of Self-determination as it Applies to Disaffected Minorities , 25... 

ANSI (1993) Personnel dosimetry performance criteria for testing. ANSI standard no. N13.11-1993, American National Standard Institute, New York... 

Testing of additives falls largely within the existing criteria for testing resins ... 

Logic solver configuration Criteria for test completion Test location... 

---