Sources storage batteries

Charger Technology. Alkaline storage batteries are commonly charged from rectified d-c equipment, solar panels, or other d-c sources and... 

Alternatives to coal and hydrocarbon fuels as a source of power have been sought with increasing determination over the past three decades. One possibility is the Hydrogen Economy (p, 40), Another possibility, particularly for secondary, mobile sources of power, is the use of storage batteries. Indeed, electric vehicles were developed simultaneously with the first intemal-combustion-cngined vehicles, the first being made in 1888. In those days, over a century ago, electric vehicles were popular and sold well compared with the then noisy, inconvenient and rather unreliable peU ol-engined vehicles. In 1899 an electric car held the world land-speed record at 105 km per hour. In the early years of this century, taxis in New York, Boston and Berlin were mainly electric there were over 20000 electi ic vehicles in the USA and some 10000 cars and commercial vehicles in London. Even today (silent) battery-powered milk delivery vehicles are still operated in the UK. These use the traditional lead-sulfuric acid battery (p. 371), but this is extremely heavy and rather expensive. 

Direct Current (DC). This current is transmitted for industrial uses only in exceptional situations. The most common sources of direct current are storage batteries and industrial devices called rectifiers, in which alternating current is changed (rectified) to direct current, as is used in electrolytic cells for the manufacture of chlorine gas, magnesium, aluminum, and a few other chemicals. The direct current is flowing from the source through the user application and back to the source, in one direction. The motor is primarily used for speed control of selected equipment. 

Lead is produced from both primary (i.e., mined ore) and secondary (i.e., scrap metal and wastes) sources, and is imported by the United States. In 1997, production from primary and secondary sources was 343,000 metric tons and 1.1 million metric tons, respectively (Smith 1998), and imports reached 265,000 metric tons (Larrabee 1998 Smith 1998). Approximately 1.6 million metric tons of lead were consumed in the United States in 1997 (Smith 1998). Of lead used in 1997, 86.9% was used for storage batteries, 7.8% was used in metal products, and 5.3% was used in miscellaneous applications (Smith 1998). Because of the adverse health effects associated with exposure to lead, its use in paints, ceramic products, gasoline additives (now banned), and solder has declined dramatically in recent years. In 1997,... 

To date, the single most important commercial use of lead is in the manufacture of lead-acid storage batteries. However, for most of the twentieth century, the most important environmental source of Pb was gasoline combnstion. It is also used in alloys, such as fusible metals, antifriction metals, and solder. Lead foil is made with lead alloys. Lead is used for covering cables and as a lining for laboratory sinks, tanks, and the chambers in the lead-chamber process for the manufacture of sulfuric acid. It is used extensively in plumbing. Because it has excellent vibration-dampening characteristics, lead is often used to support heavy machinery. 

The term fuel cell is usually reserved for electrochemical cells to which the reagents are fed from an external source. Storage cells (often called batteries, although this term really refers to a collection of interconnected cells) already contain all the necessary reagents, and they may be classed into two groups, rechargeable and disposable cells. In this section, we survey... 

The initial current is usually 6-8 amperes at 50-60 volts. The resistance of the cell constantly changes because of depletion of electrolyte and deposition of potassium methoxide in the pores of the ceramic cup. The preferred source of current is a rectifier capable of delivering 10-15 amperes at 30-90 volts. Lead storage batteries connected in series are also satisfactory but require frequent recharging. 

Because the reaction product (solid PbS04) adheres to the surface of the electrodes, a "run-down" lead storage battery can be recharged by using an external source of direct current to drive the cell reaction in the reverse, nonspontaneous direction. In an automobile, the battery is continuously recharged by a device called an alternator, which is driven by the engine. 

---