Solution vinyl polymerization

Radiation initiation for solution vinyl polymerization is more complex. A special feature of radiation is that it attacks all components of the system including the solvent. With a monomer-solvent mixture, therefore, the rate of initiation can be represented by a linear equation as follows ... 

Azobisnittiles are efficient sources of free radicals for vinyl polymerizations and chain reactions, eg, chlorinations (see Initiators). These compounds decompose in a variety of solvents at nearly first-order rates to give free radicals with no evidence of induced chain decomposition. They can be used in bulk, solution, and suspension polymerizations, and because no oxygenated residues are produced, they are suitable for use in pigmented or dyed systems that may be susceptible to oxidative degradation. 

Organic peroxide-aromatic tertiary amine system is a well-known organic redox system 1]. The typical examples are benzoyl peroxide(BPO)-N,N-dimethylani-line(DMA) and BPO-DMT(N,N-dimethyl-p-toluidine) systems. The binary initiation system has been used in vinyl polymerization in dental acrylic resins and composite resins [2] and in bone cement [3]. Many papers have reported the initiation reaction of these systems for several decades, but the initiation mechanism is still not unified and in controversy [4,5]. Another kind of organic redox system consists of organic hydroperoxide and an aromatic tertiary amine system such as cumene hydroperoxide(CHP)-DMT is used in anaerobic adhesives [6]. Much less attention has been paid to this redox system and its initiation mechanism. A water-soluble peroxide such as persulfate and amine systems have been used in industrial aqueous solution and emulsion polymerization [7-10], yet the initiation mechanism has not been proposed in detail until recently [5]. In order to clarify the structural effect of peroxides and amines including functional monomers containing an amino group, a polymerizable amine, on the redox-initiated polymerization of vinyl monomers and its initiation mechanism, a series of studies have been carried out in our laboratory. 

Several articles [7,8] have reported that a persulfate-amine system, particularly persulfate-triethanol amine and persulfate-tetramethylethylenediamine (TMEDA) can be used as redox initiators in aqueous solution polymerization of vinyl monomers. Recently, we studied the effect of various amines on the AAM aqueous solution polymerization and found that not only tertiary amine but also secondary and even primary aliphatic amine and their polyamines can promote the vinyl polymerization as shown in Table 6 [40-42]. 

In aqueous solutions the persulphate ion is known as a strong oxidizing agent, either alone or with activators. Thus, it has been extensively used as the initiator of vinyl polymerization [43-47]. However, only later, Kulkarni et al. [48] reported the graft copolymerization of AN onto cellulose using the Na2S203/K2S20s redox system. 

Finally it should be stressed that the complexation affects the microstructure of poly dienes. As was shown by Langer I56) small amounts of diamines added to hydrocarbon solutions of polymerizing lithium polydienes modify their structure from mainly 1,4 to a high percentage of vinyl unsaturation, e.g., for an equivalent amount of TMEDA at 0 °C 157) the fraction of the vinyl amounts to about 80%. Even more effective is 1,2-dipiperidinoethane, DIPIP. It produces close to 100% of vinyl units when added in equimolar amount to lithium in a polymerization of butadiene carried out at 5 °C 158 159), but it is slightly less effective in the polymerization of isoprene 160>. 

Autoacceleration, Glass and Zutty (S) and Burnett and Melville 9) reported an increase in the rate and average degree of polymerization with increasing solution viscosity, heterogeneous conditions and chain coiling for free radical, vinyl polymerizations. Autoacceleration is also called Trommsdorff. (10) effect. 

Another development has been the advent of the dual-cure resin cements. These are hybrids of glass polyalkenoate cements and methacrylates that set both by an add-base cementation reaction and by vinyl polymerization (which may be initiated by light-curing). In these materials, the solvent is not water but a mixture of water and hydroxyethylmethacrylate which is capable of taking dimethacrylates and poly(acrylic add)-containing vinyl groups into solution. In the absence of light these materials set slowly and... 

Copolymers of a cationic monomer and a vinyl alkoxysilane may be prepared by conventional vinyl polymerization techniques. These techniques include solution polymerization in water and emulsion polymerization with either free radical initiators or redox initiators. 

Vinyl Polymerization (383) Radical Polymerization of Vinyl Monomer with an Aqueous Solution of Polystyrenesulfonate or Polyvinylphosphonate... 

Hyperbranched polymers can be synthesized in several different ways, the most commonly used being classical condensation reactions. These reactions are made either in bulk or in solution where the A,jB monomers are condensed by themselves or in combination with a By core monomer. The use of a By core monomer improves the control over the molecular weight and dispersity of the hyperbranched polymer. Hyperbranched polymers can also be synthesized by self-condensing vinyl polymerization using vinyl-functional monomers. The introduction of this approach has greatly increased the number of possible monomers that can be used for this type of polymer. 

Hermans,Jr.,J., Lohr.D., and Ferro,D. Treatment of the Folding and Unfolding of Protein Molecules in Solution According to a Lattic Model. Vol. 9, pp. 229—283. Hutchison, J. and Led with, A. Photoinitiation of Vinyl Polymerization by Aromatic Carbonyl Compounds. Vol. 14, pp. 49—86. 

Solution, vinyl chloride is dissolved in a suitable solvent for polymerization. The resultant polymer may be sold in solution form, or dried and pelletized. 

The gel or Trommsdorff effect (11) is the striking autoacceleration of the vinyl polymerization reaction as the viscosity of the monomer-polymer solution increases. Chain termination involving the recombination of two free radicals becomes diffusion controlled and this results in a decrease in the rate of termination. The concentration of active free radicals therefore increases proportionally. To sum up the gel effect the rate of Vazo catalyst initiation increases with temperature the rate of propagation or polymerization increases with the viscosity and the rate of termination of the growing polymer chains decreases with the viscosity. This of course also results in an increase in the molecular weight of linear polymers, but this has no practical significance when crosslinking is part of the reaction. 

ESR studies of free radical polymerization had been limited to solid state systems. Recently, B. Ranby and K. Takakura were able to explore vinyl polymerization in aqueous solution, using a redox system of TiCls with H202. 

The ESR method combined with a flow system should be very powerful for studying short lived transient radicals during vinyl polymerization in solutions. As will be made clear later, however, the conditions for the reaction occurring in the flow cell are quite different from the conventional solution polymerization studied during a steady-state process. Nevertheless, the hyperfine structure of the ESR spectra observed by the flow technique, can provide straightforward information on the structure, concentration, reactivity, and even the steric conformation of the transient radicals involved, particularly at the initial stage of the polymerization. 

Solution polymerization. Solution polymerization involves polymerization of a monomer in a solvent in which both the monomer (reactant) and polymer (product) are soluble. Monomers are polymerized in a solution that can be homogeneous or heterogeneous. Many free radical polymerizations are conducted in solution. Ionic polymerizations are almost exclusively solution processes along with many Ziegler-Natta polymerizations. Important water-soluble polymers that can be prepared in aqueous solution include poly(acrylic acid), polyacrylamide, poly(vinyl alcohol), and poly(iV-vinylpyrrolidinone). Poly(methyl methacrylate), polystyrene, polybutadiene, poly(vinyl chloride), and poly(vinylidene fluoride) can be polymerized in organic solvents. 

Styrene polymerization is the oldest, most studied, and best understood of all vinyl polymerizations. PS has been produced commercially for over fifty years and h reached an annual worldwide sales volume of over twenty billion pounds. All of this PS is produced using FR chemistry and mostly by continuous solution polymerization processes. 

---