Solution - precipitation methods

This method of extraction involves dissolution of the organic phase of the plastic composition in a suitable (sometimes hot) solvent, followed by precipitation of the polymeric constituents, often in a finely divided form in suspension with the inorganic fillers, by cooling or by means of another solvent in which the analyte compound is also soluble. This method is labour intensive but very effective and if it does not completely release any chemisorbed constituents from the polymer, for example filler matrix, it will often leave them in a form very vulnerable to attack by the analytical reagent(s) finally used in the determination. 

---

Solution-precipitation methods, e.g., those with use of strong borohydride reductors Sol-gel technologies Reverse-micelle synthesis Polymer-mediated synthesis Protein-templated methods... 

The double inverse microemulsion method was also used to synthesize per-ovskite-type mixed metal oxides [ 155]. One microemulsion solution contained nitrate salts of either Ba(N03)2/Pb(N03)2, La(N03)3/Cu(N03)2 or La(N03)3/ Ni(N03)2, and the other microemulsion contained ammonium oxalate or oxalic acid as the precipitant. These metal oxalate particles of about 20 nm were readily calcined into single phase perovskite-type BaPb03, La2Cu04 and LaNi03. The calcinations required for the microemulsion-derived mixed oxalates were 100-250 °C below the temperatures used for the metal oxalates prepared by a conventional aqueous solution precipitation method. 

CaP powders synthesized in the laboratory with a chemical solution precipitation method with different synthesis p>arameters (temperature, final suspension pH, maturation time) as-synthesized and then thermally treated at various temperatures from 200°C up to 1400<>C ... 

Fey GTK, Chen KS (1999) Synthesis, characterization, and cell performance of LiNiV04 cathode materials prepared by a new solution precipitation method. J Power Sour 81-82 467-471... 

In a previous study, it was established that PLLA/PMMA blends, which are mixed with a solution/precipitation method, are miscible [120). In the present study it was confirmed that PLLA/PMMA blends, which are mixed with a two-roll mill, are also miscible. 

Phase Inversion (Solution Precipitation). Phase inversion, also known as solution precipitation or polymer precipitation, is the most important asymmetric membrane preparation method. In this process, a clear polymer solution is precipitated into two phases a soHd polymer-rich phase that forms the matrix of the membrane, and a Hquid polymer-poor phase that forms the membrane pores. If precipitation is rapid, the pore-forming Hquid droplets tend to be small and the membranes formed are markedly asymmetric. If precipitation is slow, the pore-forming Hquid droplets tend to agglomerate while the casting solution is stiU fluid, so that the final pores are relatively large and the membrane stmcture is more symmetrical. Polymer precipitation from a solution can be achieved in several ways, such as cooling, solvent evaporation, precipitation by immersion in water, or imbibition of... 

In the hot precipitation method, sodium carbonate solution is added slowly to a refluxing solution of mercuric chloride, followed by an additional reflux period of 1 to 2 h. The washed precipitate is then dried. A variation allows the substitution of mercuric nitrate for the chloride if substantial quantities of sodium chloride are used. Sodium hydroxide, ia the presence of sodium carbonate, is the precipitant. 

Bramley, A.S., Hounslow, M.J. and Ryall, R.L., 1996a. Aggregation during precipitation from solution A method for extracting rates from experimental data. Journal of Colloid and Interfacial Science, 183, 155-165. 

Precipitation methods 418 Precipitation reactions 340 theory of, 340, 342, 579 Precision 13, 129 Preparation for analysis 109 solution of sample, 110 Preventive solution 368 Primary amines see Amines Primary standard substances requirements of, 261... 

Delmas and his co-workers have done extensive work on pyroaurite-type materials which has recently been reviewed [73], In addition to precipitation methods, they have prepared the materials by mild oxidative hydrolysis of nickelates that were prepared by thermal methods similar to those used for the preparation of LiNiOz [74]. A cobalt-substituted material NaCoA ( Ni( A02) was prepared by the reaction of Na20, Co304 and NiO at 800 °C under a stream of oxygen. The material was then treated with a 10 molL-1 NaCIO +4 molL 1 KOH solution for 15h to form the oxidized y -oxyhydroxide. The pyroau-... 

A ferrite waste treatment process is being investigated to determine if it can more effectively remove actinides from waste solution with less solid waste generation than the flocculant precipitation method presently used (18). 

CuNPs) in Fig. 7 shows the monodisperse and uniformly distributed spherical particles of 10+5 nm diameter. The solution containing nanoparticles of silver was found to be transparent and stable for 6 months with no significant change in the surface plasmon and average particle size. However, in the absence of starch, the nanoparticles formed were observed to be immediately aggregated into black precipitate. The hydroxyl groups of the starch polymer act as passivation contacts for the stabilization of the metallic nanoparticles in the aqueous solution. The method can be extended for synthesis of various other metallic and bimetallic particles as well. 

Four types of techniques for separating the bound fraction P Q from the reagent mixture are in common usage, loosely termed double antibody, solid phase, charcoal adsorption and solution precipitation. The first type is used with radioimmunoassay methods specifically, while the other three types can be used with both radioassay and radioimmunoassay methods. 

Wahl and Deck were able to obtain an estimate of an assumed second-order rate coefficient ( 10 l.mole" .sec at 4°C) using a separation procedure based on the extraction of Fe(CN)e by a chloroform solution of Ph AsCl, in the presence of the ions Co(CN)g and Ru(CN)6, to reduce the exchange between the iron species in the two liquid phases. A similar estimate was obtained using a precipitation method in the presence of the carrier Ru(CN)6. A direct injection technique was used as short reaction times were necessary. Wahl has reviewed the large induced exchanges occurring in the chemical separation methods. The extraction procedure when the carriers Co(CN)6 and Ru(CN) are present provides the most satisfactory method of separation. ... 

The activity of the Au/metal oxide catalysts is extremely sensitive to the method of preparation. The Au/metal oxide catalysts were prepared by the co-precipitating method [1]. During the course of this study, we have determined that the activity and the stability of the catalyst for room temperature CO oxidation were a function of Ph of the solution, temperature of precipitation, aging temperature and time, catalyst wash procedure, and calcination. 

Chatterjee et al. [20] quantitatively separated primaquine from amodiquine by a selective precipitation method. A powdered sample containing primaquine and amodiaquine was dissolved in 0.01 N hydrochloric acid 4 N ammonia was added to precipitate amodiaquine. The mixture was filtered and the combined filtrate and washings containing primaquine was diluted with water and 0.1 N hydrochloric acid. The absorbance of this solution was measured at 282 nm versus a solvent blank. 

---