SHORT-CHAINED

Table 5.4 gives the specific energies of selected organic liquid compounds. Compared with the isooctane chosen as the base reference, the variations from one compound to another are relatively small, on the order of 1 to 5%, with the exception of some particular chemical structures such as those of the short chain nitroparaffins (nitromethane, nitroethane, nitropropane) that are found to be energetic . That is why nitromethane, for example, is recommended for very small motors such as model airplanes it was also used in the past for competitive auto racing, for example in the Formula 1 at Le Mans before being forbidden for safety reasons. 

The adliesion and fiision mechanisms between bilayers have also been studied with the SEA [M, 100]. Kuhl et al [17] found that solutions of short-chained polymers (PEG) could produce a short-range depletion attraction between lipid bilayers, which clearly depends on the polymer concentration (fignre Bl.20.1 It. This depletion attraction was found to mduce a membrane fusion widiin 10 minutes that was observed, in real-time, using PECO fringes. There has been considerable progress in the preparation of fluid membranes to mimic natural conditions in the SEA [ ], which promises even more exciting discoveries in biologically relevant areas. 

Kuhl T Let al 1994 Modulation of interaction forces between bilayers exposing short-chained ethylene oxide headgroups Biophys. J. 66 1479-88... 

R N. The exponent v = 0.588 has been calculated using renonnalization group teclmiques [9, 10], enumeration teclmiques for short chain lengths and Monte Carlo simulations [13]. 

Figure C2.1.2. Polymers witli linear and nonlinear chain architectures. The nonlinear polymers can have branched chains. Short chains of oligomers can be grafted to tire main chain. The chains may fonn a. stor-like stmcture. The chains can be cross-linked and fonn a network.

Short chains of amino acid residues are known as di-, tri-, tetrapeptide, and so on, but as the number of residues increases the general names oligopeptide and polypeptide are used. When the number of chains grow to hundreds, the name protein is used. There is no definite point at which the name polypeptide is dropped for protein. Twenty common amino acids appear regularly in peptides and proteins of all species. Each has a distinctive side chain (R in Figure 45.3) varying in size, charge, and chemical reactivity. 

Environmental Considerations. Environmental problems in Ziegler chemistry alcohol processes are not severe. A small quantity of aluminum alkyl wastes is usually produced and represents the most significant disposal problem. It can be handled by controlled hydrolysis and separate disposal of the aqueous and organic streams. Organic by-products produced in chain growth and hydrolysis can be cleanly burned. Wastewater streams must be monitored for dissolved carbon, such as short-chain alcohols, and treated conventionally when necessary. 

Selectivity. Solvent selectivity is intimately linked to the purity of the recovered extract, and obtaining a purer extract can reduce the number and cost of subsequent separation and purification operations. In aqueous extractions pH gives only limited control over selectivity greater control can be exercised using organic solvents. Use of mixed solvents, for example short-chain alcohols admixed with water to give a wide range of compositions, can be beneficial in this respect (6). 

When PET is extracted with water no detectable quantities of ethylene glycol or terephthaUc acid can be found, even at elevated extraction temperatures (110). Extractable materials are generally short-chained polyesters and aldehydes (110). Aldehydes occur naturally iu foods such as fmits and are produced metabohcaHy iu the body. Animal feeding studies with extractable materials show no adverse health effects. 

PVF displays several transitions below the melting temperature. The measured transition temperatures vary with the technique used for measurement. T (L) (lower) occurs at —15 to —20 " C and is ascribed to relaxation free from restraint by crystallites. T (U) (upper) is in the 40 to 50°C range and is associated with amorphous regions under restraint by crystallites (63). Another transition at —80° C has been ascribed to short-chain amorphous relaxation and one at 150°C associated with premelting intracrystalline relaxation. 

Lactulose. 4-O-P -D-Galactopyranosyl-4-D-fmctofuranose [4618-18-2] (Chronolac) (12) may be made from lactose using the method described in Reference 9. It is a synthetic disaccharide that is not hydroly2ed by gastrointestinal enzymes in the small intestine, but is metabolized by colonic bacteria to short-chain organic acids. The increased osmotic pressure of these nonabsorbable organic acids results in an accumulation of fluid in the colon. Lactulose may not be tolerated by patients because of an extremely sweet taste. It frequently produces flatulence and intestinal cramps. 

Light and photosynthetic electron transport convert DPEs into free radicals of undetermined stmcture. The radicals produced in the presence of the bipyridinium and DPE herbicides decrease leaf chlorophyll and carotenoid content and initiate general destmction of chloroplasts with concomitant formation of short-chain hydrocarbons from polyunsaturated fatty acids (37,97). 

It is estimated that mote than 25 x 10 different potentially toxic OP esters can be made using Schrader s classic (27) formula for effective phosphorylating agents, (39), where R and are short-chain alkyl, alkoxy, alkylthio, or alkylamino groups, and X is a displaceable moiety with a high energy P-bond such as E or acyl anhydride, and the pentavalent phosphoms atom is bonded to oxygen or sulfur. 

The newly formed short-chain radical A then quickly reacts with a monomer molecule to create a primary radical. If subsequent initiation is not fast, AX is considered an inhibitor. Many have studied the influence of chain-transfer reactions on emulsion polymerisation because of the interesting complexities arising from enhanced radical desorption rates from the growing polymer particles (64,65). Chain-transfer reactions are not limited to chain-transfer agents. Chain-transfer to monomer is ia many cases the main chain termination event ia emulsion polymerisation. Chain transfer to polymer leads to branching which can greatiy impact final product properties (66). 

Fat. Milk fat is a mixture of triglycerides and diglycerides (see Fats and fatty oils). The triglycerides are short-chain, C. —C., medium-chain, 24 46 ... 

Structure. The physical properties of LDPE depend on the molecular weight, the molecular weight distribution, as well as the frequency and distribution of long- and short-chain branching (2). 

Both propylene and isobutylene ate comonomers that are incorporated along the chain, resulting in additional short-chain branching. One important factor in controlling polymer crystallinity is the choice of chain-transfer agent. Ethane and methane, for example, are inefficient agents whose presence in the monomer feed stream must be considered in reaction control. 

Crystallinity and Density. Crystallinity and density of HDPE resins are derivative parameters both depend primarily on the extent of short-chain branching in polymer chains and, to a lesser degree, on molecular weight. The density range for HDPE resins is between 0.960 and 0.941 g/cm. In spite of the fact that UHMWPE is a completely nonbranched ethylene homopolymer, due to its very high molecular weight, it crystallines poorly and has a density of 0.93 g/cm. ... 

---