Rubber standard test methods

Standard Test Method for Adhesion Between Steel Tire Cords and Rubber. Steel cords are vulcanised into a block of mbber and the force necessary to pull the cords linearly out of the mbber is measured as adhesive force. ASTM method D2229-93a can be used for evaluating mbber compound performance with respect to adhesion to steel cord. The property measured by this test method indicates whether the adhesion of the steel cord to the mbber is greater than the cohesion of the mbber, ie, complete mbber coverage of the steel cord or less than the cohesion of mbber (lack of mbber coverage). [Pg.90]

Laminated tapes In more general use now than pressure sensitive tapes are tapes consisting of polyvinyl chloride or polyethylene films in conjunction with butyl rubber. These tapes are applied with an adhesive butyl rubber primer. Thicknesses of up to 0-75 mm are in use and loose protective outer wraps of p.v.c. or polyethylene sheet are commonly applied. Tape quality control is exercised with reference to ASTM standard test methods and may include water vapour transmission rate and elongation. [Pg.666]

Analysts in industry prefer in many cases to maintain consistent methods for their analyses. Recommended ASTM analytical procedures are quite well developed in the rubber and polymer industry. As an example, we mention the standard test method for determination of phenolic antioxidants and erucamide slip additives in LDPE using liquid chromatography [76]. However, the current industry standard test methods (ASTM, AOAC, IUPAC, etc.) use a large number of solvents in vast... [Pg.17]

Standard test method for rubber chemical analysis for polystyrene blocks in SBR (styrene-butadiene rubber) and styrene-reinforced lat-ices, ASTM Standard ASTM D3314-02, ASTM International, WestCon-shohocken, PA, 2006. [Pg.293]

ASTM D471-06, Standard Test Method for Rubber Property - Effect of Liquids, 2006. [Pg.248]

Generally, vulcanised rubber is dimensionally very stable (unless it is strained), which probably explains the lack of standard test methods for this property. In this context, thermal expansion and swelling in liquids are properties considered in their own right and not normally thought of as being measures of dimensional stability. This is a different situation to that which exists with plastics where a number of dimensional stability tests are in existence. If a measure of dimensional change is required, the appropriate dimensions of a suitable sized test piece can be measured by any of the methods mentioned in this chapter before and after an ageing treatment. [Pg.104]

ASTM D1414 1994. Standard test methods for rubber O-rings. [Pg.169]

ASTM D814, 1995 (2000). Standard test method for rubber property - Vapour transmission of volatile liquids. [Pg.362]

ASTM D4776, 2004. Standard test method for adhesion of tire cords and other reinforcing cords to rubber compounds by H-test procedure. [Pg.382]

ASTM D-2007. Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method. [Pg.192]

ASTM D1817 Standard test method for rubber chemicals Density... [Pg.166]

Standard test method for rubber property Durometer hardness Shore A and Shore D hardness testing of rubber Physical testing of rubber Part A57... [Pg.166]

Rubber, vulcanized or thermoplastic Determination of tensile stress-strain properties Standard test methods for vulcanized rubber and thermoplastic elastomers-tension... [Pg.169]

Part 1 Trouser, angle, and crescent test pieces Part 2 Small (delft) test pieces Standard test method for tear strength of conventional vulcanized rubber and thermoplastic elastomers Testing of rubber and elastomers Determination of the tear strength of elastomers Trouser test piece... [Pg.172]

ASTM D429 (methods A and C) Standard test methods for rubber property Adhesion to rigid substrates... [Pg.175]

Standard test method for rubber property-volume resistivity of electrically conductive and antistatic products Specification for electrical properties of conducting and antistatic products made from flexible polymeric material... [Pg.182]

Rubber, vulcanized Determination of the effect of liquids Standard test method for rubber property-effect of liquids Standard test method for rubber property Change in length during liquid immersion Determination of the behavior of rubbers and elastomers when exposed to fluids and vapors Determination of the effect of liquids Determination of equilibrium water vapor absorption... [Pg.183]

ASTM D297-93, Standard Test Methods for Rubber Products - Chemical Analysis, 1998. [Pg.45]

ASTM Method D3900-95 (2000) Standard Test Methods for Rubber-Raw Determination of Ethylene Units in EPM (Ethylene-Propylene Copolymers) and EPDM (Ethylene-Propylene-Diene Terpolymers). [Pg.75]

ASTM D3192-00, Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber, 2000. [Pg.351]

ASTM D 5132 Standard Test Method for Horizontal Burning Rate of Flexible Cellular and Rubber Materials Used in Occupant Compartments of Motor Vehicles... [Pg.657]

Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomers-Tension, ASTM standard D412-98a... [Pg.126]

Standard Test Method for Rubber Properties Durometer Hardness, ASTM D2240-97el, ASTM West Consho-hocken, PA, 1999. [Pg.1481]

Standard Test Methods for Rubber Products—Chemical Analysis, ASTM D 297-93(1998), ASTM West Conshohocken, PA, 1999. [Pg.1481]

ASTM D 573-88 Standard Test Method for Rubber Deterioration in an Air Oven, 5 pp (DOD Adopted) (FSC 9320) (MR) (Comm D-11)... [Pg.406]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...