Rhodium complexes substitution reactions

Aizenberg and Milstein [78] have found rhodium complex-catalyzed reactions between polyfluorobenzenes and hydrosilanes which resulted in the substitution of fluorine atoms by hydrogen and were both chemoselective and regioselective (Eq. (6) ... 

Though thermally stable, rhodium ammines are light sensitive and irradiation of such a complex at the frequency of a ligand-field absorption band causes substitution reactions to occur (Figure 2.47) [97]. The charge-transfer transitions occur at much higher energy, so that redox reactions do not compete. 

One of the commonest reactions in the chemistry of transition-metal complexes is the replacement of one ligand by another ligand (Fig. 9-3) - a so-called substitution reaction. These reactions proceed at a variety of rates, the half-lives of which may vary from several days for complexes of rhodium(iii) or cobalt(m) to about a microsecond with complexes of titanium(iii). 

As already mentioned, complexes of chromium(iii), cobalt(iii), rhodium(iii) and iridium(iii) are particularly inert, with substitution reactions often taking many hours or days under relatively forcing conditions. The majority of kinetic studies on the reactions of transition-metal complexes have been performed on complexes of these metal ions. This is for two reasons. Firstly, the rates of reactions are comparable to those in organic chemistry, and the techniques which have been developed for the investigation of such reactions are readily available and appropriate. The time scales of minutes to days are compatible with relatively slow spectroscopic techniques. The second reason is associated with the kinetic inertness of the products. If the products are non-labile, valuable stereochemical information about the course of the substitution reaction may be obtained. Much is known about the stereochemistry of ligand substitution reactions of cobalt(iii) complexes, from which certain inferences about the nature of the intermediates or transition states involved may be drawn. This is also the case for substitution reactions of square-planar complexes of platinum(ii), where study has led to the development of rules to predict the stereochemical course of reactions at this centre. 

It will not have escaped the reader s attention that the kinetically inert complexes are those of (chromium(iii)) or low-spin d (cobalt(iii), rhodium(iii) or iridium(iii)). Attempts to rationalize this have been made in terms of ligand-field effects, as we now discuss. Note, however, that remarkably little is known about the nature of the transition state for most substitution reactions. Fortunately, the outcome of the approach we summarize is unchanged whether the mechanism is associative or dissociative. 

Metal-Catalyzed. Cyclopropanation. Carbene addition reactions can be catalyzed by several transition metal complexes. Most of the synthetic work has been done using copper or rhodium complexes and we focus on these. The copper-catalyzed decomposition of diazo compounds is a useful reaction for formation of substituted cyclopropanes.188 The reaction has been carried out with several copper salts,189 and both Cu(I) and Cu(II) triflate are useful.190 Several Cu(II)salen complexes, such as the (V-f-butyl derivative, which is called Cu(TBS)2, have become popular catalysts.191... 

Some of the hydroarylation product is also observed substituted anilines afford the two products to varying degrees (Equation (15)). The closely related rhodium complexes [Rh(PCy3)2Cl]2, [Rh(dmpe)Cl]2 (where dmpe= l,2-bis(dimethylphosphino)ethane), and [Rh(C8H14)Cl]2 show essentially no catalytic activity.166 Application of [Rh(PEt3)2Cl]2 to the reaction of aniline with styrene gives a mixture of hydroamination and oxidative amination products, the latter predominating.167 Other related rhodium-catalyzed amination reactions (oxidative amination) have been reported.168 169... 

The interesting complex chemistry of rhodium has been rather neglected this is probably because most of the synthetic methods for obtaining complexes have been tedious. In general, substitutions of chlorine atoms bonded to rhodium by other ligands are slow, and products have usually been mixtures. The situation is now changing, since novel catalytic approaches to rhodium complexes have been developed.1 The catalysis in the present synthesis involves the rapid further reaction of the hydrido complex formed from l,2,6-trichIorotri(pyridine)rho-dium(III) in the presence of hypophosphite ion. 

In contrast to the reaction of an i72-CS2-rhodium complex with dimethyl acetylenedicarboxylate which gives rise to a metallocycle,186 the iron complexes 103 are converted by activated acetylenes into air-sensitive carbene complexes 104. Decomposition of the latter in air provides an unusual synthetic route to substituted tetrathiofulvene derivatives (Scheme 121).187... 

Several approaches have been undertaken to construct redox active polymermodified electrodes containing such rhodium complexes as mediators. Beley [70] and Cosnier [71] used the electropolymerization of pyrrole-linked rhodium complexes for their fixation at the electrode surface. An effective system for the formation of 1,4-NADH from NAD+ applied a poly-Rh(terpy-py)2 + (terpy = terpyridine py = pyrrole) modified reticulated vitreous carbon electrode [70]. In the presence of liver alcohol dehydrogenase as production enzyme, cyclohexanone was transformed to cyclohexanol with a turnover number of 113 in 31 h. However, the current efficiency was rather small. The films which are obtained by electropolymerization of the pyrrole-linked rhodium complexes do not swell. Therefore, the reaction between the substrate, for example NAD+, and the reduced redox catalyst mostly takes place at the film/solution interface. To obtain a water-swellable film, which allows the easy penetration of the substrate into the film and thus renders the reaction layer larger, we used a different approach. Water-soluble copolymers of substituted vinylbipyridine rhodium complexes with N-vinylpyrrolidone, like 11 and 12, were synthesized chemically and then fixed to the surface of a graphite electrode by /-irradiation. The polymer films obtained swell very well in aqueous... 

The binding mode of a vinylallene and a rhodium(I) complex depends greatly on the substitution patterns, probably for steric reasons. The reaction of a vinylallene lacking substituents at the vinylic terminus with RhCl(PPh3)3 provides a a2-bonded (vinylallene)rhodium complex having an essentially planar structure. Several stoichiometric reactions of the complex have been examined (Scheme 16.41) [41]. 

RhClCO(dppp) 2] for the sequential construction of an enyne precursor, starting from a malonic acid derivative and allylic acetate, which was converted in situ to the cycloaddition product with excellent yields. Obviously, the Pd complex catalyzes the allylic substitution reaction, while the rhodium catalyst is responsible for the PKR (Eq. 6). 

The preparation of cyclopropanes by intermolecular cyclopropanation with acceptor-substituted carbene complexes is one of the most important C-C-bond-forming reactions. Several reviews [995,1072-1074,1076,1077,1081] and monographs have appeared. In recent decades chemists have focused on stereoselective intermolecular cyclopropanations, and several useful catalyst have been developed for this purpose. Complexes which catalyze intermolecular cyclopropanations with high enantiose-lectivity include copper complexes [1025,1026,1028,1029,1031,1373,1398-1400], cobalt complexes [1033-1035], ruthenium porphyrin complexes [1041,1042,1230], C2-symmetric ruthenium complexes [948,1044,1045], and different types of rhodium complexes [955,998,999,1002-1004,1010,1062,1353,1401-1405], Particularly efficient catalysts for intermolecular cyclopropanation are C2-symmetric cop-per(I) complexes, as those shown in Figure 4.20. These complexes enable the formation of enantiomerically enriched cyclopropanes with enantiomeric excesses greater than 99%. Illustrative examples of intermolecular cyclopropanations are listed in Table 4.24. 

When substituted silanes are used instead of hydrogen, the process is referred to as silylformylation or silylcarbonylation. Only rhodium complexes catalyze the transformation of unsaturated compounds to silylaldehydes via the silylformylation reaction. Iridium complexes also are able to catalyze the simultaneous incorporation of substituted silanes and CO into unsaturated compounds, although during the reaction other types of product are formed. In the presence of [ IrCl(C03) ] and [Ir4(CO)i2]) the alkenes react with trisubstituted silanes and CO to give enol silyl ethers of acyl silanes [58] according to Scheme 14.10. 

Rhodium complexes are able to transform various enynes 1 into the corresponding bi-cyclopentenones 2 with equal efficiency to that found with cobalt, and facilitate previously formidable PK reactions. The scope of the substituents on the alkyne for the intramolecular reaction is broad alkyl la/b and aryl-substituted substrates Ic provide the desired products in excellent yield with both [RhCl(CO)2]2 and [RhCl(CO)dppp]2 (Tab. 11.3). 

Disappointingly, the trimethylphosphite-modified Wilkinson catalyst, which had proven effective for the allylic substitution reaction [30], furnished only a trace amount of the PK product. By screening various rhodium catalysts for both reactions, it was determined that [RhCl(CO)dppp]2 was the optimum complex for the sequential pro-... 

Numerous studies have been directed toward expanding the chemistry of the donor/ac-ceptor-substituted carbenoids to reactions that form new carbon-heteroatom bonds. It is well established that traditional carbenoids will react with heteroatoms to form ylide intermediates [5]. Similar reactions are possible in the rhodium-catalyzed reactions of methyl phenyldiazoacetate (Scheme 14.20). Several examples of O-H insertions to form ethers 158 [109, 110] and S-H insertions to form thioethers 159 [111] have been reported, while reactions with aldehydes and imines lead to the stereoselective formation of epoxides 160 [112, 113] and aziridines 161 [113]. The use of chiral catalysts and pantolactone as a chiral auxiliary has been explored in many of these reactions but overall the results have been rather moderate. Presumably after ylide formation, the rhodium complex disengages before product formation, causing degradation of any initial asymmetric induction. 

Squai e-planar rhodium I) complexes, phosphorus-nitrogen donor ligands, 44 295 Square-planar substitution reactions, 34 219-221... 

---