Alkynes rhodium

A study of dimerization of alkynes catalysed by RhCl(PMe3)3 showed the reaction to yield a mixture of straight-chain and branched products. The authors were able to identify a number of rhodium/alkyne complexes along the reaction route, and conclude that the reaction may be summarized by the scheme presented here. Extrusion of the metal then gave rise to products. 

Nucleophilic attack by a carbanion on a rhodium-acetylene complex has been postulated in the reaction of tolane with MeMgBr in the presence of (Ph3P)3 RhBr (Michman and Balog, 1971). This interpretation is supported by the known formation of rhodium-alkyne complexes under these conditions (Muller and Segnitz, 1973) and by the predominant formation of trans-a-methyl-stilbene. Additional study of the scope of this reaction would seem worthwhile since recycling of the rhodium-containing by-product (Ph3P)3 RhOH, should be possible. 

The conditions for hydrogenation of alkynes are similar to those employed for alkenes In the presence of finely divided platinum palladium nickel or rhodium two molar equivalents of hydrogen add to the triple bond of an alkyne to yield an alkane... 

Hydrogenation of benzene and other arenes is more difficult than hydrogenation of alkenes and alkynes Two of the more active catalysts are rhodium and platinum and it IS possible to hydrogenate arenes m the presence of these catalysts at room temperature and modest pressure Benzene consumes three molar equivalents of hydrogen to give cyclohexane... 

The direct combination of selenium and acetylene provides the most convenient source of selenophene (76JHC1319). Lesser amounts of many other compounds are formed concurrently and include 2- and 3-alkylselenophenes, benzo[6]selenophene and isomeric selenoloselenophenes (76CS(10)159). The commercial availability of thiophene makes comparable reactions of little interest for the obtention of the parent heterocycle in the laboratory. However, the reaction of substituted acetylenes with morpholinyl disulfide is of some synthetic value. The process, which appears to entail the initial formation of thionitroxyl radicals, converts phenylacetylene into a 3 1 mixture of 2,4- and 2,5-diphenylthiophene, methyl propiolate into dimethyl thiophene-2,5-dicarboxylate, and ethyl phenylpropiolate into diethyl 3,4-diphenylthiophene-2,5-dicarboxylate (Scheme 83a) (77TL3413). Dimethyl thiophene-2,4-dicarboxylate is obtained from methyl propiolate by treatment with dimethyl sulfoxide and thionyl chloride (Scheme 83b) (66CB1558). The rhodium carbonyl catalyzed carbonylation of alkynes in alcohols provides 5-alkoxy-2(5//)-furanones (Scheme 83c) (81CL993). The inclusion of ethylene provides 5-ethyl-2(5//)-furanones instead (82NKK242). The nickel acetate catalyzed addition of r-butyl isocyanide to alkynes provides access to 2-aminopyrroles (Scheme 83d) (70S593). 

Recently, Aumann et al. reported that rhodium catalysts enhance the reactivity of 3-dialkylamino-substituted Fischer carbene complexes 72 to undergo insertion with enynes 73 and subsequent formation of 4-alkenyl-substituted 5-dialkylamino-2-ethoxycyclopentadienes 75 via the transmetallated carbene intermediate 74 (Scheme 15, Table 2) [73]. It is not obvious whether this transformation is also applicable to complexes of type 72 with substituents other than phenyl in the 3-position. One alkyne 73, with a methoxymethyl group instead of the alkenyl or phenyl, i.e., propargyl methyl ether, was also successfully applied [73]. 

Scheme 15 Formation of 4-alkenyl(phenyl)-substituted 5-dialkylamino-2-ethoxycyclopen-tadienes 75 via transmetallated alkyne-inserted rhodium-carbene complexes 74 [73]. For further details see Table 2...

Secondary amines can be added to certain nonactivated alkenes if palladium(II) complexes are used as catalysts The complexation lowers the electron density of the double bond, facilitating nucleophilic attack. Markovnikov orientation is observed and the addition is anti An intramolecular addition to an alkyne unit in the presence of a palladium compound, generated a tetrahydropyridine, and a related addition to an allene is known.Amines add to allenes in the presence of a catalytic amount of CuBr " or palladium compounds.Molybdenum complexes have also been used in the addition of aniline to alkenes. Reduction of nitro compounds in the presence of rhodium catalysts, in the presence of alkenes, CO and H2, leads to an amine unit adding to the alkene moiety. An intramolecular addition of an amine unit to an alkene to form a pyrrolidine was reported using a lanthanide reagent. 

Similar reactions have been carried out on acetylene. Aldehydes add to alkynes in the presence of a rhodium catalyst to give conjugated ketones. In a cyclic version of the addition of aldehydes, 4-pentenal was converted to cyclopen-tanone with a rhodium-complex catalyst. In the presence of a palladium catalyst, a tosylamide group added to an alkene unit to generate A-tosylpyrrolidine derivatives. ... 

The reaction of alkenes with alkenes or alkynes does not always produce an aromatic ring. An important variation of this reaction reacts dienes, diynes, or en-ynes with transition metals to form organometallic coordination complexes. In the presence of carbon monoxide, cyclopentenone derivatives are formed in what is known as the Pauson-Khand reaction The reaction involves (1) formation of a hexacarbonyldicobalt-alkyne complex and (2) decomposition of the complex in the presence of an alkene. A typical example Rhodium and tungsten ... 

The syntheses and spectroscopic and electrochemical characterization of the rhodium and iridium porphyrin complexes (Por)IVI(R) and (Por)M(R)(L) have been summarized in three review articles.The classical syntheses involve Rh(Por)X with RLi or RMgBr, and [Rh(Por) with RX. In addition, reactions of the rhodium and iridium dimers have led to a wide variety of rhodium a-bonded complexes. For example, Rh(OEP)]2 reacts with benzyl bromide to give benzyl rhodium complexes, and with monosubstituted alkenes and alkynes to give a-alkyl and fT-vinyl products, respectively. More recent synthetic methods are summarized below. Although the development of iridium porphyrin chemistry has lagged behind that of rhodium, there have been few surprises and reactions of [IrfPorih and lr(Por)H parallel those of the rhodium congeners quite closely.Selected structural data for rr-bonded rhodium and iridium porphyrin complexes are collected in Table VI, and several examples are shown in Fig. 7. ... 

Fig. 2.14 Rhodium and iridium cataiysts for the intramolecular hydroamination of alkynes...

Scheme 2.33 Products in the rhodium catalysed-chroroesterification of alkynes...

The NHCs have been used as ligands of different metal catalysts (i.e. copper, nickel, gold, cobalt, palladium, rhodium) in a wide range of cycloaddition reactions such as [4-1-2] (see Section 5.6), [3h-2], [2h-2h-2] and others. These NHC-metal catalysts have allowed reactions to occur at lower temperature and pressure. Furthermore, some NHC-TM catalysts even promote previously unknown reactions. One of the most popular reactions to generate 1,2,3-triazoles is the 1,3-dipolar Huisgen cycloaddition (reaction between azides and alkynes) [8]. Lately, this [3h-2] cycloaddition reaction has been aided by different [Cu(NHC)JX complexes [9]. The reactions between electron-rich, electron-poor and/or hindered alkynes 16 and azides 17 in the presence of low NHC-copper 18-20 loadings (in some cases even ppm amounts were used) afforded the 1,2,3-triazoles 21 regioselectively (Scheme 5.5 Table 5.2). 

A variety of transition metal complexes catalyze hydrosilylation of alkynes. Catalysis of hydrosilylation by rhodium gives T -alkenylsilanes from 1-alkynes.74... 

Subsequently, cationic rhodium catalysts are also found to be effective for the regio- and stereoselective hydrosilation of alkynes in aqueous media. Recently, Oshima et al. reported a rhodium-catalyzed hydrosilylation of alkynes in an aqueous micellar system. A combination of [RhCl(nbd)]2 and bis-(diphenylphosphi no)propanc (dppp) were shown to be effective for the ( >selective hydrosilation in the presence of sodium dodecylsulfate (SDS), an anionic surfactant, in water.86 An anionic surfactant is essential for this ( )-selective hydrosilation, possibly because anionic micelles are helpful for the formation of a cationic rhodium species via dissociation of the Rh-Cl bond. For example, Triton X-100, a neutral surfactant, gave nonstereoselective hydrosilation whereas methyltrioctylammonium chloride, a cationic surfactant, resulted in none of the hydrosilation products. It was also found that the selectivity can be switched from E to Z in the presence of sodium iodide (Eq. 4.47). 

In addition, Wu and Li recently have developed an efficient rhodium-catalyzed cascade hydrostannation/conjugate addition of terminal alkynes and unsaturated carbonyl compounds in water stereoselectively (Scheme 4.5).88... 

Arylation of alkynes via addition of arylboronic acids to alkynes represents an attractive strategy in organic synthesis. The first addition of arylboronic acids to alkynes in aqueous media catalyzed by rhodium was reported by Hayashi et al.89 They found that rhodium catalysts associated with chelating bisphosphine ligands, such as 1,4-Ws(diphenyl-phosphino)butane (dppb) and 1,1 -/ E(diphenylphospliino)fcrroccnc... 

Rhodium also has been reported as a catalyst for [2+2+2] alkyne cycloaddition in water. Uozumi et al. explored the use of an amphiphilic resin-supported rhodium-phosphine complex as catalyst (Eq. 4.60). The immobilized rhodium catalyst was effective for the [2+2+2] cycloaddition of internal alkynes in water,113 although the yields of products were not satisfactory. 

Oshima et al. explored a cationic rhodium-catalyzed intramolecular [4+2] annulation of l,3-dien-8-ynes in water in the presence of sodium dodecyl sulfate (SDS), an anionic surfactant.132 When the substrate l,3-dien-8-yne was a terminal alkyne, the reaction provided an inter-molecular [2+2+2] product (Eq. 4.68). In water, a reactive cationic rhodium species was formed by the dissociation of the Rh-Cl bond in the presence of SDS. The SDS forms negatively charged micelles, which would concentrate the cationic rhodium species (Scheme 4.15). 

---