Rheological properties structure

Petroleum Enhancing oil recovery, regulation of filterability and rheological properties of drilling muds, thickening of water, soil structure formation, oil flotation... 

Acrylamide polymers are used as multipurpose additives in the oil-producing industry. Introduction of polymers into drilling fluids-drilling muds improves the rheological properties of the fluids in question, positively affects the size of suspended particles, and adds to filterability of well preparation to operation. Another important function is soil structure formation, which imparts additional strength to the well walls. A positive effect is also observed in secondary oil production, where acrylamide polymers additives improve the mobility of aqueous brines injections, which contribute to... 

The existence of yield stress Y at shear strains seems to be the most typical feature of rheological properties of highly filled polymers. A formal meaing of this term is quite obvious. It means that at stresses lower than Y the material behaves like a solid, i.e. it deforms only elastically, while at stresses higher than Y, like a liquid, i.e. it can flow. At a first approximation it may be assumed that the material is not deformed at all, if stresses are lower than Y. In this sense, filled polymers behave as visco-plastic media with a low-molecular and low-viscosity dispersion medium. This analogy is not random as will be stressed below when the values of the yield stress are compared for the systems with different dispersion media. The existence of yield stress in its physical meaning must be correlated with the strength of a structure formed by the interaction between the particles of a filler. 

The ionic strength dependence of intrinsic viscosity is function of molecular structure and protein folding, ft is well known that the conformational and rheological properties of charged biopolymer solutions are dependent not only upon electrostatic interactions between macromolecules but also upon interactions between biopolymer chains and mobile ions. Due electrostatic interactions the specific viscosity of extremely dilute solutions seems to increase infinitely with decreasing ionic concentration. Variations of the intrinsic viscosity of a charged polyampholite with ionic strength have problems of characterization. 

H. Muller, W. Breuer, C. P. Herold, P. Kuhm, and S. von Tapavicza. Mineral additives for setting and/or controlling the rheological properties and gel structure of aqueous liquid phases and the use of such additives. Patent US 5663122,1997. 

This study has shown that the process used to coagulate milk has a broad effect on fat globule-protein interactions and on the molecular structure of the gel. In addition we have shown that the different molecular structures of the three coagula correspond to different rheological properties. 

Taking into account the relevance of the range of semi-dilute solutions (in which intermolecular interactions and entanglements are of increasing importance) for industrial applications, a more detailed picture of the interrelationships between the solution structure and the rheological properties of these solutions was needed. The nature of entanglements at concentrations above the critical value c leads to the viscoelastic properties observable in shear flow experiments. The viscous part of the flow behaviour of a polymer in solution is usually represented by the zero-shear viscosity, rj0, which depends on the con-... 

Milas, M., Rinaudo, M., and Tinland, B., Comparative depolymerization of xanthan gum by ultrasonic and enzymic treatments. Rheological and structural properties, Carb. Polym., 6, 95, 1986. 

The measurement of rheological properties of the PLFNCs in the molten state is crucial in order to gain a fundamental understanding of the nature of the processability and the structure-property relationships for these materials. 

The rheological properties of insitu polymerized nanocomposites with end-tethered polymer chains were first described by Krisnamoorti and Giannelis [33]. The flow behavior of PCL- and Nylon 6-based nanocomposites differed extremely from that of the corresponding neat matrices, whereas the thermorheological properties of the nanocomposites were entirely determined by the behavior of the matrices [33]. The slope of G (co) and G"(co) versus flxco is much smaller than 2 and 1, respectively. Values of 2 and 1 are expected for linear mono-dispersed polymer melts, and the large deviation, especially in the presence of a very small amount of layered silicate loading, may be due to the formation of a network structure in the molten... 

---