Reactive processing RRIM

In the reinforced RIM (RRIM) process a dry reinforcement preform is placed in a closed mold. Next a reactive plastic system is mixed under high pressure in a specially designed mixing head. Upon mixing, the reacting liquid flows at low pressure through a runner system to fill the mold cavity, impregnating the reinforcement in the process. Once the mold cavity is filled, the plastic quickly completes its reaction. The complete cycle time required to produce a molded thick product can be as little as one minute. 

The latest trend in foamed composites is automotive structural parts produced by the SRIM (structural reaction-injection-molding) process. The SRIM process is a method of the reactive liquid injection molding (i.e., LIM). LIM includes RIM (reaction injection molding), RRIM (reinforced RIM) and RTM (resin transfer molding). IX M (Liquid Composite Molding) is a relatively new technical term which includes SRIM, RRIM and RTM (Resin Transfer Molding). 

RRIM polyurethanes are an extension to Reaction Injection Moulding (RIM) which is a relatively recent, but now established, plastics processing technique. Simplified, RRIM is the inclusion of a reinforcement - short glass fibres - into one of the components used in the RIM process. However, the inclusion of glass reinforcement into one of the reactive components, usually the polyol, has meant that certain processing equipment modifications were necessary in order to handle the... 

---