Reactions magnesium oxides with water

As we shall see later, borides (as well as oxides, nitrides, carbides, etc.) react with water to produce a hydrogen compound of the nonmetal. Thus, the reaction of magnesium boride with water might be expected to produce BH3, borane, but instead the product is B2ff6, diborane (m.p. -165.5 °C, b.p. -92.5 °C). This interesting covalent hydride has the structure... 

Substances Soluble in Water. — Heat 0.5 gm. of magnesium oxide with 20 cc. of water to boiling, allow to cool, and filter off 10 cc. of the supernatant liquid. The filtrate, should have at most a slight alkaline reaction, and on evaporat ion should not yield a residue weighing more than 0.002 gm. 

Oxychloride and oxysulfate cements are another class of acid-base cements. These are formed by reaction of a metal oxide such as that of magnesium oxide with a chloride or sulfate of a metal in the presence of water. Magnesium and zinc based oxychloride cements have been developed fully. 

Evidence for the solvated electron e (aq) can be obtained reaction of sodium vapour with ice in the complete absence of air at 273 K gives a blue colour (cf. the reaction of sodium with liquid ammonia, p. 126). Magnesium, zinc and iron react with steam at elevated temperatures to yield hydrogen, and a few metals, in the presence of air, form a surface layer of oxide or hydroxide, for example iron, lead and aluminium. These reactions are more fully considered under the respective metals. Water is not easily oxidised but fluorine and chlorine are both capable of liberating oxygen ... 

Prepare a saturated solution of sodium sulphide, preferably from the fused technical sodium polysulphide, and saturate it with sulphur the sulphur content should approximate to that of sodium tetrasulphide. To 50 ml. of the saturated sodium tetrasulphide solution contained in a 500 ml. round-bottomed flask provided with a reflux condenser, add 12 -5 ml. of ethylene dichloride, followed by 1 g. of magnesium oxide to act as catalyst. Heat the mixture until the ethylene dichloride commences to reflux and remove the flame. An exothermic reaction sets in and small particles of Thiokol are formed at the interface between the tetrasulphide solution and the ethylene chloride these float to the surface, agglomerate, and then sink to the bottom of the flask. Decant the hquid, and wash the sohd several times with water. Remove the Thiokol with forceps or tongs and test its rubber-like properties (stretching, etc.). 

To a mixture of 100 ml of dry dichloromethane, 0.10 mol of propargyl alcohol and 0.11 mol of triethylamine was added a solution of 0.05 mol of Ph2PCl in 75 ml of dichloromethane in 3 min between -80 and -90°C. The cooling bath was removed, and when the temperature had reached 10°C, the reaction mixture was poured into a solution of 2.5 ml of 362 HCl in 100 ml of water. After vigorous shaking the lower layer was separated and the aqueous layer was extracted twice with 25-ml portions of dichloromethane. The combined solutions were washed twice with water, dried over magnesium sulfate and then concentrated in a water-pump vacuum, giving almost pure allenyl phosphine oxide as a white solid, m.p. 98-100 5, in almost 1002 yield. 

The term lime also has a broad coimotation and frequently is used in referring to limestone. According to precise definition, lime can only be a burned form quicklime, hydrated lime, or hydraiflic lime. These products are oxides or hydroxides of calcium and magnesium, except hydraiflic types in which the CaO and MgO are chemically combined with impurities. The oxide is converted to a hydroxide by slaking, an exothermic reaction in which the water combines chemically with the lime. These reversible reactions for both high calcium and dolomitic types are Quicklime... 

After epoxidation a distillation is performed to remove the propylene, propylene oxide, and a portion of the TBHP and TBA overhead. The bottoms of the distillation contains TBA, TBHP, some impurities such as formic and acetic acid, and the catalyst residue. Concentration of this catalyst residue for recycle or disposal is accompHshed by evaporation of the majority of the TBA and other organics (141,143,144), addition of various compounds to yield a metal precipitate that is filtered from the organics (145—148), or Hquid extraction with water (149). Low (<500 ppm) levels of soluble catalyst can be removed by adsorption on soHd magnesium siUcate (150). The recovered catalyst can be treated for recycle to the epoxidation reaction (151). 

Ethyl chloride can be dehydrochlorinated to ethylene using alcohoHc potash. Condensation of alcohol with ethyl chloride in this reaction also produces some diethyl ether. Heating to 625°C and subsequent contact with calcium oxide and water at 400—450°C gives ethyl alcohol as the chief product of decomposition. Ethyl chloride yields butane, ethylene, water, and a soHd of unknown composition when heated with metallic magnesium for about six hours in a sealed tube. Ethyl chloride forms regular crystals of a hydrate with water at 0°C (5). Dry ethyl chloride can be used in contact with most common metals in the absence of air up to 200°C. Its oxidation and hydrolysis are slow at ordinary temperatures. Ethyl chloride yields ethyl alcohol, acetaldehyde, and some ethylene in the presence of steam with various catalysts, eg, titanium dioxide and barium chloride. 

Magnesium (or magnesia) phosphate cements are based on the reaction between ignited magnesium oxide and acid phosphates, which are generally modified by the addition of ammonium and aluminium salts. The phosphates may be either in solution or blended in solid form with the magnesium oxide. In the latter form the cement is formed by mixing the powder blend with water. 

Those based on the reaction between magnesium oxide and ammonium dihydrogen phosphate (ADP), often in the presence of sodium tripolyphosphate (STPP), which is mixed with water (El-Jazairi, 1982 Abdelrazigeta/., 1984 Abdelrazig, Sharp El-Jazairi, 1988, 1989). 

Mortars of this system are prepared by blending ignited magnesium oxide, ADP and STPP with a filler, normally quartz sand. On mixing with water a cementitious mass is formed. The reaction has been studied by a number of workers Kato et al. (1976), Takeda et al. (1979), Neiman ... 

---