Reaction physical adsorption

The drying mechanisms of desiccants may be classified as foUows Class 1 chemical reaction, which forms either a new compound or a hydrate Class 2 physical absorption with constant relative humidity or vapor pressure (solid + water + saturated solution) Class 3 physical absorption with variable relative humidity or vapor pressure (soHd or liquid + water + diluted solution) and Class 4 physical adsorption. 

Ridomil, with which the treatment with starch solution was not carried out, is said to yield brown chromatogram zones on a pale yellow background [14]. Hence, it may be assumed that this detection is based not on the iodine azide reaction but on the physical adsorption and enrichment of iodine in the lipophilic chromatogram zones (cf. Iodine Reagents ). 

Some deactivation processes are reversible. Deactivation by physical adsorption occurs whenever there is a gas-phase impurity that is below its critical point. It can be reversed by eliminating the impurity from the feed stream. This form of deactivation is better modeled using a site-competition model that includes the impurities—e.g., any of Equations (10.18)-(10.21)— rather than using the effectiveness factor. Water may be included in the reaction mixture so that the water-gas shift reaction will minimize the formation of coke. Off-line decoking can be... 

The influence of the Ni atoms becomes clear from a comparison of the actual reaction path, which consists of physical adsorption and subsequent dissociative chemisorption, with the theoretical alternative reaction path, consisting of dissociation of H2 followed by the formation of two Ni-H bonds. H2 is a very stable molecule and, as a consequence, the potential energy of the dissociated H-atoms is very high. In moving to the adsorbed state, Ni-... 

As noted above, adsorption isotherms are largely derived empirically and give no information on the types of adsorption that may be involved. Scrivner and colleagues39 have developed an adsorption model for montmorillonite clay that can predict the exchange of binary and ternary ions in solution (two and three ions in the chemical system). This model would be more relevant for modeling the behavior of heavy metals that actively participate in ion-exchange reactions than for organics, in which physical adsorption is more important. 

The proposed mechanism of effect of surfactant and ultrasound is reported in Fig. 7.5. The long chain surfactant molecules attach to surface of nanoparticles due to physical adsorption. Only thin layer is adsorbed onto the CaC03 nanoparticles. Due to presence of ultrasound and use of surfactant will control the nucleation. Surfactant keeps the particles away from each other by preventing flocculation due to change in surface tension of reaction mass. The concentration of additives was changed from 0.2 to 1.0 g/L. Addition of 0.2 g/L tripolyphosphate shows the increase in the rate of precipitation which is determined from the Ca(OH)2 consumption. Polyacrylic acid shows the least rate of precipitation (0.115 mol/1), which... 

This section treats chemical and physical adsorption phenomena in order to provide necessary background material for the discussion of catalytic reaction mechanisms in Section 6.3.1. 

Clay minerals are structure of aluminum- and silicate-oxides. Such structures have free bond and vacancies on selective site of the mineral structure allowing them to participate in both physical adsorption and chemical reactions modifying the available concentration of the chemicals in the environment. 

The strength of the chemical bond may vary considerably, and identifiable chemical compounds in the usual sense may not actually form. However, the adhesive force is much greater than found in physical adsorption. The heat liberated during chemisorption is usually large, of the order of the heat of chemical reaction. 

For some applications, an adsorbent may be impregnated with a material that enhances its contaminant-removal ability. The improved effectiveness may be related to any of several mechanisms. The impregnating material may react with the vapor contaminant to form a compound or complex that remains on the adsorbent surface. Some impregnants react with the contaminant, or catalyze reactions of the contaminant with other gas constituents, to form less noxious vapor-phase substances. In some instances, the impregnant acts as a catalyst intermittently, for example, under regeneration conditions. In this case, the contaminant is adsorbed by physical adsorption and destroyed by a catalytic reaction during regeneration. 

The interactions between solutes and solvents are noncovalent in nature (barring the occurrence of chemical reactions), and therefore fall into the same category as those that govern molecular recognition processes, the formation and properties of liquids and solids, physical adsorption, etc. Hydrogen bonding, in its many manifestations, is a particularly prominent and important example. 

A variety of procedures were utilized to analyze this reaction mixture and to characterize a,10-diaminopolystyrene. Thin layer chromatographic analysis using toluene as eluent exhibited three spots with Rf values of 0.85, 0.09, and 0.05 which corresponded to polystyrene, poly(styryl)amine and a,w-diaminopolystyrene (see Figure 1). Pure samples of each of these products were obtained by silica gel column Chromatography of the crude reaction mixture initially using toluene as eluent [for polystyrene and poly(styryl)amine] followed by a methanol/toluene mixture (5/100 v/v) for the diamine. Size-exclusion chromatography could not be used to characterize the diamine since no peak was observed for this material, apparently because of the complication of physical adsorption to the column packing material. Therefore, the dibenzoyl derivative (eq. 5) was prepared and used for most of the analytical characterizations. 

Chemisorption denotes the situation in which an actual chemical bond is formed between the molecules and the surface atoms. A molecule undergoing chemisorption may lose its identity as the atoms are rearranged, forming new compounds that better satisfy the valences of the surface atoms. The enthalpy of chemisorption is much greater than that of physical adsorption. The basis of much catalytic activity at surfaces is that chemisorption may organize molecules into forms that can readily undergo reactions. It often is difficult to distinguish between chemisorption and physical sorption, because a chemisorbed layer may have a physically sorbed layer deposited above it. 

---