Raman microscopy, analytical method

Materials characterization techniques, ie, atomic and molecular identification and analysis, ate discussed ia articles the tides of which, for the most part, are descriptive of the analytical method. For example, both iaftared (it) and near iaftared analysis (nira) are described ia Infrared and raman SPECTROSCOPY. Nucleai magaetic resoaance (nmr) and electron spia resonance (esr) are discussed ia Magnetic spin resonance. Ultraviolet (uv) and visible (vis), absorption and emission, as well as Raman spectroscopy, circular dichroism (cd), etc are discussed ia Spectroscopy (see also Chemiluminescence Electho-analytical techniques It unoassay Mass specthot thy Microscopy Microwave technology Plasma technology and X-ray technology). 

Identifying pharmaceuticals, whether APIs or excipients used to manufacture products, and the end products themselves is among the routine tests needed to control pharmaceutical manufacturing processes. Pharmacopoeias have compiled a wide range of analytical methods for the identification of pharmaceutical APIs and usually several tests for a product are recommended. The process can be labor-intensive and time-consuming with these conventional methods. This has raised the need for alternative, faster methods also ensuring reliable identification. Of the four spectroscopic techniques reviewed in this book, IR and Raman spectroscopy are suitable for the unequivocal identification of pharmaceuticals as their spectra are compound-specific no two compounds other than pairs of enantiomers or oligomers possess the same IR spectrum. However, IR spectrometry is confronted with some practical constraints such as the need to pretreat the sample. The introduction of substantial instrumental improvements and the spread of attenuated total reflectance (ATR) and IR microscopy techniques have considerably expanded the scope of IR spectroscopy in the pharmaceutical field. Raman spectroscopy,... 

Vibrational spectroscopy represents two physically different, yet complementary spectroscopic techniques IR and Raman spectroscopy. Although both methods have been utilised for many years, recent advances in electronics, computer technologies and sampling made Fourier transform infrared (FTIR) and Raman (FT-Raman) one of the most powerful and versatile analytical tools. Enhanced sensitivity and surface selectivity allows non-invasive, no-vacuum molecular level analysis of surface and interfaces. Emphasis is placed on recent advances in attenuated total reflectance (ATR), step-scan photoacoustic (SS-PA), Fourier transform infrared (FTIR) and FT-Raman microscopies, as utilised to the analysis of polymeric surfaces and interfaces. A combination of these probes allows detection of molecular level changes responsible for macroscopic changes in three dimensions from various depths. 7 refs. 

Abstract Surface analyses have been one of the key technologies for corrosion control and surface finishing. It is very important that the most appropriate apparatus for the purpose of the analyses should be selected from various analytical techniques. In this chapter, surface analytical methods for corrosion control and surface finishing, such as X-ray fluorescence analysis (XRF), X-ray diffraction analysis (XRD), X-ray photo-electron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Auger electron spectroscopy (AES), Secondary ion mass spectrometry (SIMS), Rutherford back-scattering spectrometry (RBS), Surface-enhanced Raman spectroscopy (SERS), Fourier-transform infrared spectroscopy (FTIR), and so on, are briefly introduced. 

A researcher in the field of heterogeneous catalysis, alongside the important studies of catalysts chemical properties (i.e., properties at a molecular level), inevitably encounters problems determining the catalyst structure at a supramolecular (textural) level. A powerful combination of physical and chemical methods (numerous variants x-ray diffraction (XRD), IR, nuclear magnetic resonance (NMR), XPS, EXAFS, ESR, Raman of Moessbauer spectroscopy, etc. and achievements of modem analytical chemistry) may be used to study the catalysts chemical and phase molecular structure. At the same time, characterizations of texture as a fairytale Cinderella fulfill the routine and very frequently senseless work, usually limited (obviously in our modem transcription) with electron microscopy, formal estimation of a surface area by a BET method, and eventually with porosimetry without any thorough insight. 

NMR is not, of course, the only analytical technique used to establish the composition and microstructure of polymeric materials. Others include >66 ultraviolet-visible spectroscopy (UV-Vis), Raman spectroscopy, and infrared (IR) spectroscopy. IR and Raman spectroscopy are particularly useful, when by virtue of cross-linking (see. e.g. Chapter 9), or the presence of rigid aromatic units (see Chapter 4). the material neither melts nor dissolves in any solvent suitable for NMR. The development of microscopy based on these spectroscopic methods now makes such analysis relatively simple (see below). Space precludes a detailed account of these and many other techniques familiar to the organic chemist. Instead we focus for the remainder of the chapter on some of the techniques used to characterize the physical properties of polymeric materials. 

In analytical studies of unknowns, Raman spectroscopy is very useful as a screening method for choosing the best further sophisticated techniques, and for control of the sufficiency and adequacy of received and synthesized information. This is especially important when there are very limited amounts of substances such as linked polymeric complex materials (paints, coatings, adhesives, sealants, etc.) when separation and isolation methods are hardly applicable. Combined investigations using FT-Raman followed by FT-IR diamond-cell microscopy frequently gives adequate results. 

To obtain reliable experimental data and to correctly interpret them, we used such physicochemical and analytical techniques as dilatometry, viscometiy, UV and IR spectroscopy, electroiuc paramagnetic resonance, Raman light scattering spectroscopy, electron microscopy, and gas-liquid chromatography. To analyze the properties of polymeric dispersions, the turbidity spectrum method was used, and the efficiency of flocculants was estimated gravimetrically and by the sedimentation speed of special water-suspended imitators (e.g. copper oxide). 

---