Radical chain polymerization copolymerization

In this section, the important concepts related to the formation of hydrogels by free radical copolymerization/cross-linking are examined. Greater depth beyond the scope of this chapter can be obtained from textbooks on polymer chemistry and the papers cited herein. As stated earlier, almost all gels produced from monomers for pharmaceutical applications are synthesized by free radical chain polymerizations. 

Comparison of the Two Reactions Step-Growth Polymerization in More Detail Making PET in the Melt Interfacial Poly condensation Chain-Growth Polymerization in More Detail Free Radical Chain Polymerization Going One Step Better Emulsion Polymerization Copolymerization Ionic Chain Polymerization It Lives ... 

The free-radical chain polymerization of maleimides and the iV-substitnted derivatives has been extensively and both homo- and copolymerization... 

When one reactivity ratio is greater than unity and the other is less than unity, either propagating species will prefer to add monomers of the first type. Relatively long sequences of this monomer will thus be formed if the reactivity ratios differ sufficiently. A special situation arises when ri 1 and T2 1 or vice versa. In this case, the product composition will tend toward that of the homopolymer of the more reactive monomer. Such reactivity ratios refiect the existence of an impractical copolymerization. An example of this type of behavior is the radical chain polymerization of styrene-vinyl acetate system, where monomer reactivity ratios of 55 and 0.01 are observed. The large differences between the monomer reactivity ratios imparts a tendency toward consecutive homopolymerization of the two monomers. For example, when ri 1 and T2 1, both and... 

In the present chapter, the basic principles of firee-radical chain polymerizations, i.e., chain-growth polymerizations in which the reactive centers are free radicals, will be considered in detail, focusing on the polymerization reactions in which only one monomer is involved, while polymerization reactions involving more than one monomer, referred to as free-radical copolymerization, are considered separately in Chapter 7. Chain-growth polymerizations in which the active centers are ionic are discussed in Chapter 8. 

Several groups have conducted graft copolymerizations on starch or its purified components, amylose and amylopectin. The syntheses are based on attack of the anhydroglucose unit of starch by cerium (+4) ion. The free radical produced from this attack is then immersed in a monomer solution polymerizable by free radical, chain polymerization and a graft copolymer is formed. A typical synthesis procedure (10,16) is as follows. 

The ceiling temperature constraint in the homopolymerization of alphamethyl styrene (AMS) can be circumvented by copolymerization with acrylonitrile (AN) to prepare multicomponent random microstructures that offer higher heat resistance than SAN. The feasibility of a thermal initiation of free radical chain polymerization is evaluated by an experimental study of the terpolymerization kinetics of AMS-AN-Sty. Process considerations such as polyrates, molecular weight of polymer formed, sensitivity of molecular weight, molecular weight distribution, and kinetics to temperature were measured. 

While living polymerizations can be exploited to produce block copolymers, a copolymerization should give polymer chains that contain both monomers distributed throughout. You might expect that a radical chain polymerization would give a truly random copolymer. Radicals are quite reactive and not known for their selectivity. In fact, though, radical copolymerizations are not totally random, and some quite distinctive polymer compositions can be achieved. Consider a radical polymerization progressing in the presence of two different monomers. 

Despite numerous efforts, there is no generally accepted theory explaining the causes of stereoregulation in acryflc and methacryflc anionic polymerizations. Complex formation with the cation of the initiator (146) and enoflzation of the active chain end are among the more popular hypotheses (147). Unlike free-radical polymerizations, copolymerizations between acrylates and methacrylates are not observed in anionic polymerizations however, good copolymerizations within each class are reported (148). 

In contrast to ionic chain polymerizations, free radical polymerizations offer a facile route to copolymers ([9] p. 459). The ability of monomers to undergo copolymerization is described by the reactivity ratios, which have been tabulated for many monomer systems for a tabulation of reactivity ratios, see Section 11/154 in Brandrup and Immergut [14]. These tabulations must be used with care, however, as reactivity ratios are not always calculated in an optimum manner [15]. Systems in which one reactivity ratio is much greater than one (1) and the other is much less than one indicate poor copolymerization. Such systems form a mixture of homopolymers rather than a copolymer. Uncontrolled phase separation may take place, and mechanical properties can suffer. An important ramification of the ease of forming copolymers will be discussed in Section 3.1. 

The synthesis of elastomers by step, chain, and ring-opening polymerizations is reviewed. These reactions are characterized as to the process variables which must be controlled to achieve the synthesis and crosslinking of an elastomer of the required structure. Both radical and ionic chain polymerizations are discussed as well as the structural variations possible through copolymerization and s tereoregularity. 

Another differential reaction is copolymerization. An equi-molar mixture of styrene and methyl methacrylate gives copolymers of different composition depending on the initiator. The radical chains started by benzoyl peroxide are 51 % polystyrene, the cationic chains from stannic chloride or boron trifluoride etherate are 100% polystyrene, and the anionic chains from sodium or potassium are more than 99 % polymethyl methacrylate.444 The radicals attack either monomer indiscriminately, the carbanions prefer methyl methacrylate and the carbonium ions prefer styrene. As can be seen from the data of Table XIV, the reactivity of a radical varies considerably with its structure, and it is worth considering whether this variability would be enough to make a radical derived from sodium or potassium give 99 % polymethyl methacrylate.446 If so, the alkali metal intitiated polymerization would not need to be a carbanionic chain reaction. However, the polymer initiated by triphenylmethyl sodium is also about 99% polymethyl methacrylate, whereas tert-butyl peroxide and >-chlorobenzoyl peroxide give 49 to 51 % styrene in the initial polymer.445... 

Hence, cation-radical copolymerization leads to the formation of a polymer having a lower molecular weight and polydispersity index than the polymer got by cation-radical polymerization— homocyclobutanation. Nevertheless, copolymerization occnrs nnder very mild conditions and is regio-and stereospecihc (Bauld et al. 1998a). This reaction appears to occnr by a step-growth mechanism, rather than the more efficient cation-radical chain mechanism proposed for poly(cyclobutanation). As the authors concluded, the apparent suppression of the chain mechanism is viewed as an inherent problem with the copolymerization format of cation-radical Diels-Alder polymerization. ... 

Chain copolymerization is important from several considerations. Much of our knowledge of the reactivities of monomers, free radicals, carbocations, and carbanions in chain polymerization comes from copolymerization studies. The behavior of monomers in copolymerization reactions is especially useful for studying the effect of chemical structure on reactivity. Copolymerization is also very important from the technological viewpoint. It greatly increases the ability of the polymer scientist to tailor-make a polymer product with specifically desired properties. Polymerization of a single monomer is relatively limited as to the number of different products that are possible. The term homopolymerization is often used to distinguish the polymerization of a single monomer from the copolymerization process. 

The polymerization of a mixture of more than one monomer leads to copolymers if two monomers are involved and to terpolymers in the case of three monomers. At low conversions, the composition of the polymer that forms from just two monomers depends on the reactivity of the free radical formed from one monomer toward the other monomer or the free radical chain of the second monomer as well as toward its own monomer and its free radical chain. As the process continues, the monomer composition changes continually and the nature of the monomer distribution in the polymer chains changes. It is beyond the scope of this laboratory manual to discuss the complexity of reactivity ratios in copolymerization. It should be pointed out that the formation of terpolymers is even more complex from the theoretical standpoint. This does not mean that such terpolymers cannot be prepared and applied to practical situations. In fact, Experiment 5 is an example of the preparation of a terpolymer latex that has been suggested for use as an exterior protective coating. 

---