Racemic alcohols, kinetic resolution

Mikolajczyk and coworkers have summarized other methods which lead to the desired sulfmate esters These are asymmetric oxidation of sulfenamides, kinetic resolution of racemic sulfmates in transesterification with chiral alcohols, kinetic resolution of racemic sulfinates upon treatment with chiral Grignard reagents, optical resolution via cyclodextrin complexes, and esterification of sulfinyl chlorides with chiral alcohols in the presence of optically active amines. None of these methods is very satisfactory since the esters produced are of low enantiomeric purity. However, the reaction of dialkyl sulfites (33) with t-butylmagnesium chloride in the presence of quinine gave the corresponding methyl, ethyl, n-propyl, isopropyl and n-butyl 2,2-dimethylpropane-l-yl sulfinates (34) of 43 to 73% enantiomeric purity in 50 to 84% yield. This made available sulfinate esters for the synthesis of t-butyl sulfoxides (35). 

Kinetic Resolution by Direct Esterification. This is the least common strategy for kinetic resolution and is most commonly executed on racemic alcohols with carboxylic acids in organic solvents. Reports include several alicyclic secondary alcohols such as menthol and various aliphatic secondary alcohols. Kinetic resolution of a variety of racemic saturated, unsaturated, and a-substituted carboxylic acids has also been effected by direct esterification with various alcohols. ... 

A number of other asymmetric enolate protonation reactions have been described using chiral proton sources in the synthesis of a-aryl cyclohexanones. These include the stoichiometric use of chiral diols [68] and a-sulfinyl alcohols [69]. Other catalytic approaches involve the use of a BlNAP-AgF complex with MeOH as the achiral proton source, [70] a chiral sulfonamide/achiral sulfonic acid system [71,72] and a cationic BINAP-Au complex which also was extended to acyclic tertiary a-aryl ketones [73]. Enantioenriched 2-aryl-cyclohexanones have also been accessed by oxidative kinetic resolution of secondary alcohols, kinetic resolution of racemic 2-arylcyclohexanones via an asymmetric Bayer-Villiger oxidation [74] and by arylation with diaryhodonium salts and desymmetrisation with a chiral Li-base [75]. 

Acyl transferase enzymes have been widely used to synthesize chiral esters, amides, alcohols, and amines. In many cases, these conversions involve kinetic resolutions of alcohols, adds, esters, amines, and amides. Of course, since each enantiomer makes up half of the racemic mixture, kinetic resolutions can provide a maximum 50% yield. This limitation can be overcome by racemizing or inverting the configuration of the unreacted substrate during the enzymatic reaction. Such a scheme is referred to as a dynamic kinetic resolution and theoretically allows complete substrate conversion to product along with 100% chemical yield of a single product enantiomer. 

Enzymatic hydrolysis of A/-acylamino acids by amino acylase and amino acid esters by Hpase or carboxy esterase (70) is one kind of kinetic resolution. Kinetic resolution is found in chemical synthesis such as by epoxidation of racemic allyl alcohol and asymmetric hydrogenation (71). New routes for amino acid manufacturing are anticipated. 

Various racemic secondary alcohols with different substituents, eg, a-hydroxyester (60), are resolved by PFL neatly quantitatively (75). The effect of adjacent unsatuiation on enzyme-catalyzed kinetic resolutions was thoroughly studied for a series of aHyUc (61), propargyUc (62), and phenyl-substituted 2-aIkanols (76,77). Excellent selectivity was observed for (E)-aHyhc alcohols whereas (Z)-isomers showed poor selectivity (76). 

The application of the AE reaction to kinetic resolution of racemic allylic alcohols has been extensively used for the preparation of enantiomerically enriched alcohols and allyl epoxides. Allylic alcohol 48 was obtained via kinetic resolution of the racemic secondary alcohol and utilized in the synthesis of rhozoxin D. Epoxy alcohol 49 was obtained via kinetic resolution of the enantioenriched secondary allylic alcohol (93% ee). The product epoxy alcohol was a key intermediate in the synthesis of (-)-mitralactonine. Allylic alcohol 50 was prepared via kinetic resolution of the secondary alcohol and the product utilized in the synthesis of (+)-manoalide. The mono-tosylated 3-butene-1,2-diol is a useful C4 building block and was obtained in 45% yield and in 95% ee via kinetic resolution of the racemic starting material. 

A noteworthy feature of the Sharpless Asymmetric Epoxidation (SAE) is that kinetic resolution of racemic mixtures of chiral secondary allylic alcohols can be achieved, because the chiral catalyst reacts much faster with one enantiomer than with the other. A mixture of resolved product and resolved starting material results which can usually be separated chromatographically. Unfortunately, for reasons that are not yet fully understood, the AD is much less effective at kinetic resolution than the SAE. 

Since the addition of dialkylzinc reagents to aldehydes can be performed enantioselectively in the presence of a chiral amino alcohol catalyst, such as (-)-(1S,2/ )-Ar,A -dibutylnorephedrine (see Section 1.3.1.7.1.), this reaction is suitable for the kinetic resolution of racemic aldehydes127 and/or the enantioselective synthesis of optically active alcohols with two stereogenic centers starting from racemic aldehydes128 129. Thus, addition of diethylzinc to racemic 2-phenylpropanal in the presence of (-)-(lS,2/ )-Ar,W-dibutylnorephedrine gave a 75 25 mixture of the diastereomeric alcohols syn-4 and anti-4 with 65% ee and 93% ee, respectively, and 60% total yield. In the case of the syn-diastereomer, the (2.S, 3S)-enantiomer predominated, whereas with the twtf-diastereomer, the (2f ,3S)-enantiomer was formed preferentially. 

Table 1.4 I nfluence ofthe organic solvent on the enantioselectivity ofthe protease subtilisin in the kinetic resolution ofthe racemic alcohol (10) (expressed as the enatiomeric ratio E, that is the ratio of the specificity constants of the two enatiomers, (lfcat/ M)s/...

Lipases from C. antarctica and P. cepacia showed higher enantioselectivity in the two ionic liquids l-ethyl-3-methylimidazolium tetrafluoroborate and l-butyl-3-methylimidazolium hexafluoroborate than in THE and toluene, in the kinetic resolution of several secondary alcohols [49]. Similarly, with lipases from Pseudomonas species and Alcaligenes species, increased enantioselectivity was observed in the resolution of 1 -phenylethanol in several ionic liquids as compared to methyl tert-butyl ether [50]. Another study has demonstrated that lipase from Candida rugosa is at least 100% more selective in l-butyl-3-methylimidazolium hexafluoroborate and l-octyl-3-nonylimidazolium hexafluorophosphate than in n-hexane, in the resolution of racemic 2-chloro-propanoic acid [51]. 

Orthoformates have been used in the lipase-catalyzed esterification aimed at the kinetic resolution of racemic acids such as flurbiprofen, a nonsteroidal anti-inflammatory drug (Figure 6.18). Orthoformates trap the water as it is formed through hydrolysis, and therefore prevent the reverse reaction, and, at the same time, provide the alcohol for the esteriflcation [65]. 

Biooxidative deracemization of racemic sec-alcohols to single enantiomers [47,48] is complementary to combined metal-assisted lipase-mediated strategies [49,50]. In general, deracemization can be realized by either an enantioconvergent, a dynamic kinetic resolution, or a stereoinversion process. The latter concept is particularly appealing, as only half of the substrate needs to be converted, as the remaining half already represents the product with correct stereochemistry. 

Stopping the reaction before completion. This method is very similar to the asymmetric syntheses discussed on page 132. A method has been developed to evaluate the enantiomeric ratio of kinetic resolution using only the extent of substrate conversion. An important application of this method is the resolution of racemic alkenes by treatment with optically active diisopinocampheylborane, since alkenes do not easily lend themselves to conversion to diastereomers if no other functional groups are present. Another example is the resolution of allylic alcohols such as (56 with one... 

The importance of proper immobilization of enzymes can be shown in the kinetic resolution of racemic a-acetoxyamides. This group of compounds is an important class of chemicals since they can be readily transformed into a-amino acids [17], N-methylated amino acids, and tripeptide mimetics [18], amino alcohols [19], 1,2-diols [20], 1,2-diamines [21], and enantiopure l,4-dihydro-4-phenyl isoquinolinones [22]. 

Scheme 5.11 Dynamic kinetic resolution of alcohol 18 by combination of enzymatic transesterification and ruthenium-catalyzed racemization.

Stereoinversion Stereoinversion can be achieved either using a chemoenzymatic approach or a purely biocatalytic method. As an example of the former case, deracemization of secondary alcohols via enzymatic hydrolysis of their acetates may be mentioned. Thus, after the first step, kinetic resolution of a racemate, the enantiomeric alcohol resulting from hydrolysis of the fast reacting enantiomer of the substrate is chemically transformed into an activated ester, for example, by mesylation. The mixture of both esters is then subjected to basic hydrolysis. Each hydrolysis proceeds with different stereochemistry - the acetate is hydrolyzed with retention of configuration due to the attack of the hydroxy anion on the carbonyl carbon, and the mesylate - with inversion as a result of the attack of the hydroxy anion on the stereogenic carbon atom. As a result, a single enantiomer of the secondary alcohol is obtained (Scheme 5.12) [8, 50a]. 

Interestingly, for the transformation of both the racemic 1-hydroxyalkanephosphonates 41 and 2-hydroxyalkanephosphonates 43 into almost enantiopure acetyl derivatives 42 and 44, respectively, a dynamic kinetic resolution procedure was applied. Pamies and BackvalP used the enzymatic kinetic resolution in combination with a ruthenium-catalysed alcohol racemization and obtained the appropriate O-acetyl derivatives in high yields and with almost full stereoselectivity (Equation 25, Table 5). It should be mentioned that lowering... 

The first reductive kinetic resolution of racemic sulphoxides was reported by Balenovic and Bregant. They found that L-cysteine reacted with racemic sulphoxides to produce a mixture of L-cystine, sulphide and non-reduced optically active starting sulphoxide (equation 147). Mikojajczyk and Para reported that the reaction of optically active phosphonothioic acid 268 with racemic sulphoxides used in a 1 2 ratio gave the non-reduced optically active sulphoxides, however, with a low optical purity (equation 148). It is interesting to note that a clear relationship was found between the chirality of the reducing P-thioacid 268 and the recovered sulphoxide. Partial asymmetric reduction of racemic sulphoxides also occurs when a complex of LiAlH with chiral alcohols , as well as a mixture of formamidine sulphinic acid with chiral amines, are used as chiral reducing systems. ... 

Hydrolytic Kinetic Resolution (HKR) of epichlorohydrin. The HKR reaction was performed by the standard procedure as reported by us earlier (17, 22). After the completion of the HKR reaction, all of the reaction products were removed by evacuation (epoxide was removed at room temperature ( 300 K) and diol was removed at a temperature of 323-329 K). The recovered catalyst was then recycled up to three times in the HKR reaction. For flow experiments, a mixture of racemic epichlorohydrin (600 mmol), water (0.7 eq., 7.56 ml) and chlorobenzene (7.2 ml) in isopropyl alcohol (600 mmol) as the co-solvent was pumped across a 12 cm long stainless steel fixed bed reactor containing SBA-15 Co-OAc salen catalyst (B) bed ( 297 mg) via syringe pump at a flow rate of 35 p,l/min. Approximately 10 cm of the reactor inlet was filled with glass beads and a 2 pm stainless steel frit was installed at the outlet of the reactor. Reaction products were analyzed by gas chromatography using ChiralDex GTA capillary column and an FID detector. 

If, according to a modified Horeau method (partial kinetic resolution of a racemate), an optically active carboxylic acid is treated with an excess of racemic amine or alcohol, the configuration of the carboxylic acid can be inferred from the optical rotation of the residual amine or alcohol [48]... 

A combination of an enzymatic kinetic resolution and an intramolecular Diels-Alder has recently been described by Kita and coworkers [23]. In the first step of this domino process, the racemic alcohols ( )-8-55 are esterified in the presence of a Candida antarctica lipase (CALB) by using the functionalized alkenyl ester 8-56 to give (R)-8-57, which in the subsequent Diels-Alder reaction led to 8-58 in high enantioselectivity of 95 and 91 % ee, respectively and 81 % yield (Scheme 8.15). In-... 

---