Acetylene pyrroles

Acrylonitrile Propanenitrile Pyrazines Pyrroles Acetylene Maleic acid Maleic anhydride Succinic anhydride... 

The main direction of the reaction of pyrroles with l-alkylthio-2-chloroacetylenes (30°C-35°C, 1.5 h) in the system KOH/DMSO is nucleophilic substitution of chlorine atom with pyrrolate anions to afford N-(alkylthioethynyl)pyrroles in 14%-42% yield (Scheme 2.50) [513]. Apart from these pyrroles, the reaction mixture contains 2-alkylthio-l,l- w- (45%-51%) and l-alkylthio-l,2-fciy-(pyrrol-l-yl)ethenes (3%-5%). When pyrrole-acetylene molar ratio is 2 1,2-alkylthio-l,l-fciy (pyrrol-l-yl) ethenes become major reaction products (up to 51% yield) (Table 2.5). 

Indoles are usually constructed from aromatic nitrogen compounds by formation of the pyrrole ring as has been the case for all of the synthetic methods discussed in the preceding chapters. Recently, methods for construction of the carbocyclic ring from pyrrole derivatives have received more attention. Scheme 8.1 illustrates some of the potential disconnections. In paths a and b, the syntheses involve construction of a mono-substituted pyrrole with a substituent at C2 or C3 which is capable of cyclization, usually by electrophilic substitution. Paths c and d involve Diels-Alder reactions of 2- or 3-vinyl-pyrroles. While such reactions lead to tetrahydro or dihydroindoles (the latter from acetylenic dienophiles) the adducts can be readily aromatized. Path e represents a category Iley cyclization based on 2 -I- 4 cycloadditions of pyrrole-2,3-quinodimcthane intermediates. 

Acetylenic compounds have often been used as precursors to certain pyrroles. Thus, 2-butyne-l,4-diol reacts with aniline ia the presence of alumina to produce A/-phenylpyrrole [635-90-5] (27). 

The polymers which have stimulated the greatest interest are the polymers of acetylene, thiophene, pyrrole and aniline, poly-p-phenylene, polyphenylvinylene and poly-l,6-heptadiyne. Of these materials polypyrrole has been available from BASF under the trade name Lutamer P160 since 1988. 

Alkynes substituted with one or two trifluoromethyl groups are also highly reactive dienophiles [9] Indeed, hexafluoro-2-butyne is used increasingly as a definitive acetylenic dienophile in "difficult Diels-Alder reactions. It was used, for example, to prepare novel inside-outside bicycloalkanes via its reaction with cir,trnns -l,3-undecadiene [74] (equation 67) and to do a tandem Diels-Alder reaction with a l,l-bis(pyrrole)methane [75] (equation 68) Indeed, its reactions with pyrrole derivatives and furan have been used in the syntheses of 3,4-bis(tri-fluoromethyl)pyrrole [76, 77] (equation 69) and ],4-bis(trifluoromethyl)benzene-2,3-oxide [78] (equation 70), respectively. 

These reactions are related to the formation of pyrroles and quinolines from aminocarbonyl compounds and acetylenes (582,583) and may be contrasted with the formation of pyran derivatives by electrophilic attack on an enamine, followed by addition of an oxygen function to the imonium carbon (584-590). 

Methyl pyrrole-l-carboxylate (14) and hot dimethyl acetylenedi-carboxylate give trimethyl pyrrole-1,3,4-tricarboxyIate (15) and acetylene, presumably through the addition-elimination sequence shown. Dimethyl acetylenedicarboxylate and 1-methylpyrrole com-... 

Methyl pyrrole-l-carboxylate and dimethyl acetylenedicarboxylate combine at 170°-200°C, giving trimethyl pyrrole-1,3,4-tricarboxylate (46) and acetylene. This reaction probably proceeds through the... 

When the original reaction between the 1-methylpyrrole and dimethyl acetylenedicarboxylate was carried out on a larger scale with inadequate cooling, an exothermic reaction took place and none of the dihydroindole (48) could be detected among the products. However these included the mellitic ester (49) and the pyrrole (50), indicating that some of the dihydroindole (48) had formed and had combined with more of the acetylenic ester as already described. A decomposition product of the dihydroindole as yet unidentified, tetramethyl l-methylindole-2,3,6,7-tetracarboxylate (52), and tetramethyl prehnit-... 

Reaction between [W(RC=C)Cl(CO)2(py)2] (R = Ph, Me) with the anionic chelating Schiff base pyrrole-2-carboxaldehyde methylimine yields the cationic complexes [NEt4][W(RCCO)(NN)2(CO)] (where NN is the dianion of the pyrrole ligand). These complexes react with methyltriflate, forming the neutral acetylenic complexes [W(NN)2(CO)(RC=COMe)] (87OM1503). One of the pyrrolic Schiff bases is coordinated via the pyrrole and imino nitrogen atoms, and another one only via the imino nitrogen atom. 

The synthesis can be conducted both in solution and without solvents. The reaction in solvent (e.g., methanol, ethanol, dioxane, dimethylformamide) is recommended for volatile 1,3-diynes and amines in this case the pyrroles are purer and the yield is higher. With disubstituted diacetylenes, ammonia and primary alkyl- and arylamines produce 1,2,3-trisubstituted pyrroles under the same conditions (65CB98 71MI1). Since disubstituted diacetylenes are readily obtained by oxidative coupling of acetylenes (98MI2), this reaction provides a preparative route to a wide range of pyrroles. 

Most conducting polymers, such as doped poly(acetylene), poly(p-pheny-lene), and poly(/ -phenylene sulfide), are not stable in air. Their electrical conductivity degrades rapidly, apparently due to reaction with oxygen and/or water. Poly(pyrrole) by contrast appears to be stable in the doped conductive state. 

In a related reaction, heating ketones in the presence of TlClsOTf leads to 1,3,5-trisubstituted arenes. " Nitriles react with 2 mol of acetylene, in the presence of a cobalt catalyst, to give 2-substituted pyridines. " Triketones fix nitrogen gas in the presence of TiCU and lithium metal to form bicyclic pyrrole derivatives. " ... 

Titanium-acetylene complexes 29 generated in situ from acetylenes, Ti(0-i-Pr)4 and /-PrMgX react with imines to form azatitanacyclopentenes 30 which then react with carbon monoxide under atmospheric pressure to provide pyrroles 31 <96TL7787>. This reaction, which utilizes commercially available reagents is an improvement over a related procedure via the corresponding zirconium complexes under 1500 psi CO <89JA776>. 

Silylated acetylenic alcohols such as 1500 cyclize on treatment with HMDS-Li to give, via 1501 and 1502, 2-phenylpyrrole 1503 [46] (Scheme 9.27 compare also the formation of 2-pyridyl-2-pyrrole 543 in Chapter 5). 

Last, N-vinylpyrrole can be obtained in good yield from the reaction of pyrrole and acetylene over soda lime at 265°C [237]. 

Oxazolium oxides, which can be generated by cyclization of a-amido acids, give pyrroles on reaction with acetylenic dipolarophiles.144 These reactions proceed by formation of oxazolium oxide intermediates. The bicyclic adduct can then undergo a concerted (retro 4 + 2) decarboxylation. 

A more complex reaction is involved in the cooligomerization of acetylenes and tert-butyl isocyanide using nickel acetate as the catalyst (Scheme 20)43 the nature of intermediate complexes leading to the formation of 2-cyano-5-terf-butylaminopyrroles has not been established. Cocyclization of tert-butyl isocyanide with coordinated hexafluoro-2-butyne gives rise to coordinated cyclopentadienone anils for molybdenum systems,44 hence the nature of acetylene substitutents and of the organometallic catalyst play crucial roles in these processes. The pyrrole products from the former reaction can be decomposed by sulfuric acid and the overall sequence provides a simple synthesis of 5-amino-2-cyanopyrroles (Scheme 20). 

The formation of 2H-pyrroles (21) and a pyrrole derivative (22) from the reaction of 3-phenyl-2//-azirines and acetylenic esters in the presence of molybdenum hexacarbonyl is intriguing mechanistically (Schemes 24, 25).53 Carbon-nitrogen bond cleavage must occur perhaps via a molybdenum complex (cf. 23 in Scheme 26) but intermediate organometallic species have not yet been isolated.53 Despite the relatively poor yields of 2H-pyrrole products, the process is synthetically valuable since the equivalent uncatalyzed photochemical process produces isomeric 2H-pyrroles from a primary reaction of azirine C—C cleavage54 (Scheme 24). 

Katritzky offers a general one-pot alternative approach to polysubstituted pyrroles utilizing disubstituted olefins of which a wider variety is commercially available compared to acetylenes . Thus, thioamides 32 were subjected to Mannich condensation with aldehydes and BtH to yield functionalized thioamides 33 which were then treated with base... 

Trofimov has extended his previously reported heterocyclization of ketoximes 39 with acetylene to propyne or its isomer allene in superbase systems (MOR/DMSO M = K, Cs, R = H, t-Bu) to afford a facile synthesis of substituted pyrroles 40 and 41 . Due to a fast propyne to allene protropic isomerization under the reaction conditions, the product is the same regardless of which species is employed. 

The Boger pyrrole synthesis based on a heterocyclic azadiene Diels-Alder strategy (1,2,4,5-tetrazine to 2,2-diazine to pyrrole) was employed by the author for the total synthesis of ningalin B . Thus a Diels-Alder reaction of the electron-rich acetylene 52 with the electron deficient 1,2,4,5-tetrazine 53 proceeded to give the desired diazine 54 which underwent subsequent ring contraction to afford the core pyrrole structure 55. 

---