Pyridine 4-vinylpyridine

Vinylpyridine (23) came into prominence around 1950 as a component of latex. Butadiene and styrene monomers were used with (23) to make a terpolymer that bonded fabric cords to the mbber matrix of automobile tires (25). More recendy, the abiUty of (23) to act as a Michael acceptor has been exploited in a synthesis of 4-dimethylaminopyridine (DMAP) (24) (26). The sequence consists of a Michael addition of (23) to 4-cyanopyridine (15), replacement of the 4-cyano substituent by dimethylamine (taking advantage of the activation of the cyano group by quatemization of the pyridine ring), and base-cataly2ed dequatemization (retro Michael addition). 4-r)imethyl aminopyri dine is one of the most effective acylation catalysts known (27). 

The relative production volumes of pyridine compounds can be ranked in the following order pyridine (1) > P-picoline (3) > a-picoline (2)> niacin (27) or niacinamide (26)> 2-vinylpyridine (23)> piperidine (18). U.S. and Japanese production was consumed internally as well as being exported, mainly to Europe. European production is mosdy consumed internally. Growth in production of total pyridine bases is expected to be small through the year 2000. 

Shipment Methods and Packaging. Pyridine (1) and pyridine compounds can be shipped in bulk containers such as tank cars, rail cars, and super-sacks, or in smaller containers like fiber or steel dmms. The appropriate U.S. Department of Transportation (DOT) requirements for labeling are given in Table 4. Certain temperature-sensitive pyridines, such as 2-vinylpyridine (23) and 4-vinylpyridine are shipped cold (<—10°C) to inhibit polymerisation. Piperidine (18) and certain piperidine salts are regulated within the United States by the Dmg Enforcement Agency (DEA) (77). Pyridines subject to facile oxidation, like those containing aldehyde and carbinol functionaUty, can be shipped under an inert atmosphere. 

Most of them are generally classified as poisons. Exceptions to this rule are known. A notable one is 4-dimethyl aminopyridine (DMAP) (24), which is widely used in industry as a superior acylation catalyst (27). Quaternary salts of pyridines are usually toxic, and in particular paraquat (20) exposure can have fatal consequences. Some chloropyridines, especially polychlorinated ones, should be handled with extra care because of their potential mutagenic effects. Vinylpyridines are corrosive to the skin, and can act as a sensitizer for some susceptible individuals. Niacin (27), niacinamide (26), and some pyridinecarbaldehydes can cause skin flushing. 

The other main source of various pyridopyridazines from pyridines are the [4 + 2] cycloaddition reactions, already mentioned (Section 2.15.8.3), between vinylpyridines and azodicarboxylic esters (79T2027, 79KGS639) or triazolidinediones e.g. 78KGS651). 2-Vinyl-pyridines gave reduced pyrido[3,2-c]pyridazines (370), 4-vinylpyridines gave [3,4-c] analogues, whilst 2-methyl-5-vinylpyridine furnishes a mixture of the [2,3-c] and [4,3-c] compounds. Yields are low, however, and these remain curiosities for practical synthetic purposes. 

The Zincke reaction has also been adapted for the solid phase. Dupas et al. prepared NADH-model precursors 58, immobilized on silica, by reaction of bound amino functions 57 with Zincke salt 8 (Scheme 8.4.19) for subsequent reduction to the 1,4-dihydropyridines with sodium dithionite. Earlier, Ise and co-workers utilized the Zincke reaction to prepare catalytic polyelectrolytes, starting from poly(4-vinylpyridine). Formation of Zincke salts at pyridine positions within the polymer was achieved by reaction with 2,4-dinitrochlorobenzene, and these sites were then functionalized with various amines. The resulting polymers showed catalytic activity in ester hydrolysis. ... 

Pyridinium ylide is considered to be the adduct car-bene to the lone pair of nitrogen in pyridine. The validity of this assumption was confirmed by Tozume et al. [12J. They obtained pyridinium bis-(methoxycarbonyl) meth-ylide by the photolysis of dimethyl diazomalonate in pyridine. Matsuyama et al. [13] reported that the pyridinium ylide was produced quantitatively by the transylidalion of sulfonium ylide with pyridine in the presence of some sulfides. However, in their method it was not easy to separate the end products. Kondo and his coworkers [14] noticed that this disadvantage was overcome by the use of carbon disulfide as a catalyst. Therefore, they used this reaction to prepare poly[4-vinylpyridinium bis-(methoxycarbonyl) methylide (Scheme 12) by stirring a solution of poly(4-vinylpyridine), methylphenylsulfo-nium bis-(methoxycarbonyl)methylide, and carbon disulfide in chloroform for 2 days at room temperature. 

Pyridine groups show the nucleophilic catalytic activity. Letsinger and Saveride122 hydrolyzed 2,4-dinitrophenyl-acetate, 72 (DNPA) and 3-nitro-4-acetoxybenzene-sulfonate, 66 (NABS) with partially quaternized poly-4-vinylpyridine (QPVP). 

Kabanov et al.131) found that a copolymer of 4-vinylpyridine and acroleinoxime, 82 (PPox), is a powerful catalyst for the hydrolyses of PNPA, NABA, and 3-nitro-4-trimethyl-acetoxybenzoic acid 83 (NTBA). The activity of the copolymer was 103 times higher than that of the low-molecular-weight oxime, iso-butyraldoxime. They proposed the cooperative activation of the oxime- and pyridine-groups in the vicinity of pyridinium cation groups of the copolymer. 

Combining the nucleophilicity of the indole 3-position just illustrated and the well-known tendency of C-2 and C-4 vinyl pyridines to add nucleophiles, a convenient synthesis of the tranquilizer benzindopyrine (19) was devised.6 Reaction of N-benzylindole (17) with 4-vinylpyridine (18) in acetic acid produced 19 directly. 

These results were compared to those obtained with pyridine 1-oxide (9) and poly(4-vinylpyridine 1-oxide) (8) as catalysts. 

Poly(2-vinylpyridine), with Mv=36,000, was purchased from Aldrich Chemical Co. and purified by two precipitations from ethanol into deionized water. CuC12-2H20 (ACS purity) and poly(4-vinylpyridine) from Mallinckrodt and Polysciences Inc. respectively, were used as received. Complexes with different ratios of Cu to pyridine moiety were formed in solution (95% methanol, 5%H20). Due to decreasing solubility of the complex with increasing copper concentration, the concentration of reagents was varied as shown in Table I. 

Borabenzene complexes of cobalt such as Co(C5H5BPh)(COD) (51) and its 5-ethyl analog show the same type of catalysis but improved activity and chemoselectivity (77). Thus, 51 as the catalyst precursor gave the hitherto best results in the catalytic synthesis of the valuable 2-vinylpyridine from C2H2 and CH2=CHCN (120°C, 51 bar, 2 hours, turnover number 2164) (77,101). Furthermore, this catalyst for the first time allowed the synthesis of pyridine from C2H2 and HCN under mild conditions (110°C, 23 bar, 60 minutes, turnover number 103) (77). 

Kureshy developed a polymer-based chiral Mn-salen complex (Figure 21). Copolymerization of styrene, divinylbenzene, and 4-vinylpyridine generated highly cross-linked (50%) porous beads loaded with pyridine ligands at 3.8 mmol g-1. Once the polymer was charged with the metal complex catalyst, enantioselective epoxidation of styrene derivatives was achieved with ee values in the range 16 46%. 79... 

This alkylation reaction can be applied to intramolecular alkylation affording cyclic products, as shown in Equations (19)-(21). The reaction of 2-vinylpyridines with 1,5- or 1,6-dienes results in the formation of five- or six-membered carbocycles with good efficiency.20,20a,20b In addition to pyridine functionality, oxozole and imidazole rings can be applied to this intramolecular cyclization. When the reaction is conducted in the presence of a monodentate chiral ferrocenylphosphine and [RhCl(coe)2]2, enantiomerically enriched carbocycles are obtained. A similar type of intramolecular cyclization is applied to TV-heterocycles. The microwave irradiation strongly... 

Vinylpyridine reacts with complexes 2 and 6 with the formation of complexes 69 and 70, respectively these are mono-azadienes, in which the aromaticity of the pyridine ring has been lost [42]. 

The poly(vinylpyridine) and poly(tert-butyl methacrylate) copolymers can easily be converted to either cationic or anionic polyelectrolytes by protonation of the pyridine rings or by base hydrolysis of the tert-butyl ester units, respectively. The highly branched structure of the molecules, in combination with the polyelectrolyte effect, should confer useful properties to these materials in solution for applications such as pH-sensitive reversible gels. 

The reaction rate varies with the change in the solvent composition. The catalysis of pyridine-Cu in DMSO-benzene mixed solvent is summarized in Fig. 4 (a). The rate constant of the catalyst reoxidation (k0) and the overall rate increase although the rate constant of electron-transfer (ke) decreases with the benzene content. Instead of the benzene solvent, the copolymer of vinylpyridine with styrene (PSP) was used as a polymer ligand, as shown in Fig. 4 (b). The overall rate and k0 increase with the styrene content in the PSP ligand, just as the solvent effect of benzene. Only several times amount of styrene unit to Cu ion (as polymer concentration ca. 0.1 wt% of the solvent) affects... 

One of the first examples of this type of blend was composed of SPEEK or SPES as the acidic component and diaminated PES, poly(4-vinylpyridine) (P4VP), poly(benzimidazole) (PBl), or poly(ethyleneimine) (PEI) as the basic component. " For blend lEC values of 1.0 meq/g, conductivity values were reported to be good, as was H2/O2 EC performance. Thermal stabilities for these blends was also demonstrated to be high (>270°C). Other examples of acid-base PEMs include blends of SPPO and PBI, sulfonated poly(phthalazinone ether ketone) and aminated SPES, SPIs and aminated Pls, and SPEEK with PES bearing benzimidazole side groups, ° as well as an unusual example in which the blend is composed of sulfonated, hyper-branched polyether and pyridine-functionalized polysulfone. ... 

Many of these systems employ charged polymers or polyelectrolytes that confer on them particular properties due to the existence of electrical charges in the polymer structure. Oyama and Anson [14,15] introduced polyelectrolytes at electrode surfaces by using poly(vinylpiridine), PVP, and poly-(acrylonitrile) to coordinate metal complexes via the pyridines or nitrile groups pending from the polymer backbone. Thomas Meyer s group at North Carolina [16, 17[ also employed poly(vinylpyridine) to coordinate Ru, Os, Re and other transition-metal complexes by generating an open coordination site on the precursor-metal complex. 

Compounds /i-C4I I,I and n-C18H37I react at the same rate with pyridine, but n-C4H9I is almost fourfold more reactive than n-C18H37I toward poly(4-vinylpyridine) [Grieg and... 

---